HIGHWAY GUARDRAIL ROLL C PURLIN FORMING MACHINEE
Cold roll forming technology has been widely used for its energy saving, environmental protection and high efficiency. Highway guardrail machineproducts have also been widely used in many industries such as construction, bridges, vehicle manufacturing, container production, and machinery manufacturing, and have played a huge role.
Full line is controlled by PLC control system with touch screen operation to achieve the human and PLC interactive. The operator can monitor the setting program (programmable control) and modify the parameter to control the line. Also can check the running status, parameter and error indication etc..
Operation type: manual /auto two type switch. In manual position: can run the each part of the machine. In auto position: can run the full line. The emergency stop ensures the safe of the equipment and operator.
Machine side is equipped with the manual operation control panel for convenient worker to operate.
Technical Requirements
Operation area:25* 4.0 * 4.0(length *width* height)m
The direction of feeding: from left side to right side
Power: 380V, 50Hz, 3 parch
Hydraulic oil: # 46 hydraulic oil
Gear oil : # 18 hyperbolic gear oil
Motor Power:about 65KW
Material quality:MS,like Q195，Q235,50#steel,galvanized sheet
Main roll forming machine:
(The machine consists with drive motor, frame, forming roller and mould etc. The main forming machine drive adopted 45kw hard tooth face speedreducer with the frequency conversion velocity modulation, the encoder control brake.)
Gear box and universal coupling drive system.
Forming station: 12 stations
Material of the forming rollers: bearing steel GCr 15, with quench treatment.
Motor power: 45KW
Material of the roller shaft: 45# thermal refining , the diameter of the shaft is 90mm.
Hydraulic cutting device
Function; According to input work piece length parameter, uses encoder fixed-length, cut off the working piece after machine stop. Adopt hydraulic cutting type.
For more information about china cold roll forming machine, please feel free to contact us!
在线联系供应商
Other supplier products
 |
CORRUGATED SHEET ROLL FORMING MACHINE | CORRUGATED SHEET ROLL FORMING MACHINE Corrugated sheet roll forming machineis Suitable for simple roof construction, it is the most economical sys... |
 |
STANDING SEAM ROLL FORMING MACHINE | With the gradual increase of cold rolling capacity, the consumption of rolls (including work rolls, support rolls and intermediate rolls, etc.) and... |
 |
Corrugated Roll Forming Machine | Galvanized steel silos are nowadays the best alternative for grain storage thanks to their versatility, easy assembly, hygienic handling, and low s... |
 |
ALUMINIUM ROLL FORMING MACHINE | How to Prevent Rust Treatment of roll forming aluminum The gear oil used in the machine tool of the aluminum profile cold-bending machine must be ... |
 |
C PURLIN ROLL FORMING MACHINE | Purlins are rolled forms of flat steel sheets ranging between 1mm and 3mm steel. They are used for building the roofs and walls to support the deck... |
Same products
 |
GT-FM24-PLC填粉机机(3+9+9+3)三导管 | 卖方: 肇庆古雷特科技有限公司 | * 描述 GT-FM-PLC（6-48工位三导管）氧化镁粉灌装机，是在GT-FM-PLC（6-48工位双导管）的基础上改进而成。 双导管灌装机与三导管灌装机的主要区别如下： 三导管灌装机可以在一... |
 |
High Speed Flat Wire Coil Winding Machine for EV Traction Motor Manufacturing | 卖方: Eurion Automation Co., Ltd. | 高精度伺服控制系统：采用工控级电脑控制平台，配套进口伺服电机与减速机，确保运行高效、精准、稳定。 六轴联动结构设计：送线轴、绕线轴、排线轴及手臂成型轴独立控制、协同配合，实现多工序复合成型。 ... |
 |
GT-FM18-PLC灌装机(8+2+8)三导管 | 卖方: 肇庆古雷特科技有限公司 | * 描述 GT-FM-PLC（6-48工位三导管）氧化镁粉灌装机，是在GT-FM-PLC（6-48工位双导管）的基础上改进而成。 双导管灌装机与三导管灌装机的主要区别如下： 三导管灌装机可以在一... |
 |
48工位填粉机 GT-FM48 | 卖方: 肇庆古雷特科技有限公司 | * 描述FM灌装机适用于长长度、不同直径的管式加热器的灌装。 FM填充机填充的加热器具有高密度，根据直径、氧化镁粉末、填充速度，密度可达2.3g/cm3。 FM灌装机有双导管灌装机和三导管灌装机... |
 |
8工位填粉机 GT-FM8 | 卖方: 肇庆古雷特科技有限公司 | * 描述 FM灌装机适用于长长度、不同直径的管式加热器的灌装。 FM填充机填充的加热器具有高密度，根据直径、氧化镁粉末、填充速度，密度可达2.3g/cm3。 FM灌装机有双导管灌装机和三导管灌装... |
