HE1000 Series Vector High Voltage Inverter
HE1000 series vector high-voltage inverter is the second-generation high-voltage frequency conversion speed regulation device independently developed, designed and produced by Shenzhen MICNO Electric Co., Ltd.
The system adopts the most mainstream power unit series technology, with DSP+ARM+FPGA three-core processor as the control core, integrating the most advanced motor vector control algorithm, with high control precision, fast response, low frequency and high torque. Features.
It is very suitable for high-voltage asynchronous motor and synchronous motor energy-saving speed regulation and process improvement and has been widely used in fans, pumps, compressors, belt conveyors, hoists and other loads.
Features of HE1000 Series Vector High Voltage Inverter
Feature 1: Three Control modes
1, High performance V/F control. (Fans, Pumps, Air compressors, etc).
2, Open loop vector control. (Belt conveyer, mill drive, fibrizer crusher, etc.)
3, Close loop vector. (Applicable to internal mixer, hoister machine, etc.)
Feature 2：Multiple types of motor drives
Support Asynchronous motors
Synchronous motors (Include PM synchronous motors)
Feature 3：Four-Quadrant Drive
Power units use IGBT for rectification, dual-energy flow, energy-saving and environmental protection.
With full rated power energy regenerative ability.
Feature 4：LVRT Low Voltage ride through
Wide voltage anti-interference capability. The system has AVR function for stable system output when the bus voltage fluctuates frequently.
No stop when instantaneous power off, during running, the system will not stop after power off in the set time. Can be set when power off 0-5s.
Feature 5：Full Brand Speed Tracking
Accurate tracking in the current rotating speed and direction of the motor without installing speed sensor
Automatic starting when power off in the set time
Feature 6：Multiple unit bypass modes
The same level bypass, when one unit is invalid, bypass it and continue to run
Neutral point drifting bypass, CPU smart calculate to ensure output stable and balance
Feature 7：Excellent Low-Frequency Control
Advanced dead area compensation technology, good low-frequency waveforms; Optimized algorithm of low-frequency oscillation suppression, no motor resonance
Feature 8：Master-slave control mode
Multi-motor drive system, realize multi-motor coordination control and obtain power balance.
Flexible grid connection, support 1 VFD drive more motors.
Optical loop connection, max support 16 motors in master-slave system.
Feature 9：Heat Dispersion Simulation
With advanced heat simulation technology, high reliable structure design for heat dispersion.
System and cabinet use unique air flue, reduce dust accumulation.
PCB/PCBA duel sides covered with conformal coatings, excellent corrosive property to raise IP level.
For more information about high voltage inverter priceand inverter micno, please feel free to contact us!
Shenzhen MICNO Electric Co., Ltd.masters the leading synchronization, a synchronization current vector control technology, torque control technology and solar pump VFD technology with more than 10 years of experience. MICNO owns 12 domestic offices and overseas sales center, covering more than 80 overseas countries. Especially, the products well sold in the Middle East, Africa, South Asia, Southeast Asia, South America, etc.
在线联系供应商
Other supplier products
 |
Storage Inverters | In remote areas, it is very suitable to establish an independent PV to supply the power to the user. The energy storage inverter is the interface b... |
 |
Servo System | What is servo control system Servo system is an automatic servo control systemthat enables the output controlled quantity of an object's position,... |
 |
KE600B Series Spindle Servo Drive | KE600B series high-performance spindle servo drive built-in position loop and servo positioning function. When used in the machine, it can realize ... |
 |
KE600A Series Closed Loop Vector Control VFD | KE600A series is a closed loop vector control VFDdeveloped on the basic of KE300, with more powerful functions, fit for more complex applications. ... |
 |
KE300T Series Electro Hydraulic Servo Inverter | KE300T electro-hydraulic servo system is developed by MICNO based on intensive studying on the process flow of injection machine. It features high-... |
Same products
 |
GT-FM24-PLC填粉机机(3+9+9+3)三导管 | 卖方: 肇庆古雷特科技有限公司 | * 描述 GT-FM-PLC（6-48工位三导管）氧化镁粉灌装机，是在GT-FM-PLC（6-48工位双导管）的基础上改进而成。 双导管灌装机与三导管灌装机的主要区别如下： 三导管灌装机可以在一... |
 |
High Speed Flat Wire Coil Winding Machine for EV Traction Motor Manufacturing | 卖方: Eurion Automation Co., Ltd. | 高精度伺服控制系统：采用工控级电脑控制平台，配套进口伺服电机与减速机，确保运行高效、精准、稳定。 六轴联动结构设计：送线轴、绕线轴、排线轴及手臂成型轴独立控制、协同配合，实现多工序复合成型。 ... |
 |
GT-FM18-PLC灌装机(8+2+8)三导管 | 卖方: 肇庆古雷特科技有限公司 | * 描述 GT-FM-PLC（6-48工位三导管）氧化镁粉灌装机，是在GT-FM-PLC（6-48工位双导管）的基础上改进而成。 双导管灌装机与三导管灌装机的主要区别如下： 三导管灌装机可以在一... |
 |
48工位填粉机 GT-FM48 | 卖方: 肇庆古雷特科技有限公司 | * 描述FM灌装机适用于长长度、不同直径的管式加热器的灌装。 FM填充机填充的加热器具有高密度，根据直径、氧化镁粉末、填充速度，密度可达2.3g/cm3。 FM灌装机有双导管灌装机和三导管灌装机... |
 |
8工位填粉机 GT-FM8 | 卖方: 肇庆古雷特科技有限公司 | * 描述 FM灌装机适用于长长度、不同直径的管式加热器的灌装。 FM填充机填充的加热器具有高密度，根据直径、氧化镁粉末、填充速度，密度可达2.3g/cm3。 FM灌装机有双导管灌装机和三导管灌装... |
