STEEL STRUCTURE PAINT
The anti-corrosion coating solution for steel structure buildings is mainly made according to ISO12944, including serving life, corrosion environment, structural design, surface treatment, coating system, coating product performance, construction supervision and the solution plan of maintenance support.
When designing a anti corrosion coating for structural steel, the first thing is to determine the corrosion environment of the steel structure, then determine the required service life of the anti-corrosive paints, and finally determine the supporting plan of the anti-corrosive paints, including the product type and the thickness of the paint film.
According to the definition of corrosive environment in ISO12944-2, remote areas, low-pollution areas, and environment inside buildings with heating are C1 and C2 environments. In urban and industrial environments, the moderately polluted area is the C3 environment. Industrial areas, coastal areas, chemical plants and other places with high pollution or salt spray can be regarded as C4 environments. High-humidity industrial areas and places with particularly severe pollution can be identified as C5-I industrial corrosion environments. High humidity and high salinity are C5-M marine corrosion environments.
Features of Steel Structure Paint
Anti-rust primer
In the anti-corrosion coating system of steel structure, the role of anti-rust primer is very important. Commonly used anti-rust primers include epoxy zinc-rich primer, inorganic zinc-rich primer and thick build modified epoxy paint.
The function of the intermediate paint is to increase the thickness of the coating to improve the shielding performance of the entire coating system. The most commonly used intermediate paint is epoxy mica iron oxide intermediate paint.
The main function of the topcoat is to shield the sun's ultraviolet rays and the destructive effect of the air pollution on the coating, resist wind, snow and rain, and have a good decorative property. Highly weather-resistant anti-corrosion topcoats on the surface of steel structures are mainly acrylic polyurethane topcoats, fluorocarbon topcoats and polysiloxane coatings.
ISO12944-2
According to the definition of corrosive environment in ISO12944-2, remote areas, low-pollution areas, and environment inside buildings with heating are C1 and C2 environments. In urban and industrial environments, the moderately polluted area is the C3 environment. Industrial areas, coastal areas, chemical plants and other places with high pollution or salt spray can be regarded as C4 environments. High-humidity industrial areas and places with particularly severe pollution can be identified as C5-I industrial corrosion environments. High humidity and high salinity are C5-M marine corrosion environments.
ISO12944-1 divides the design service life of anticorrosive coating system into three durability ranges.
1) Low durability, design life is less than 5 years.
2) Medium durability, design life is 5-15 years.
3) High durability, design life is more than 15 years.
The steel structure building requires a high service life, so for the steel structure coating system, a high durability service life is also required. Therefore, the structural paint design for steel structure buildings is more than 15 years, or even more than 25 years.
We are apaints manufacturer. we provide industrial protective paints, fireproof paint for steel beams, anti corrosion primer for steel, c5 corrosion environment, solvent free paintand etc. For more information about types of anti corrosive paintsand how to measure painting area of structural steel, please feel free to contact us!
在线联系供应商
Other supplier products
 |
MARINE PAINT | Marine boat paintare the paints that are painted on various parts of the ship to extend its service life and meet the special requirements. Mari... |
 |
FUXI ® EPOXY PAINT | Liquid epoxy paintare the most important category of anti-corrosion coating products. They are widely used in: the hull of the ship, deck (in... |
 |
Water-borne Inorganic Zinc-Rich Anticorrosive Primer | The waterborne inorganic zinc primer coating, like the solvent-based inorganic zinc-rich paint, is rich in metallic zinc powder as an anti-rust pig... |
 |
Chlorinated Rubber Anticorrosive Intermediate Coat (Gray) | Chlorinated rubber anticorrosive intermediate paint is formulated as an anti-corrosion undercoat. It has excellent anti-corrosion performance, wate... |
 |
Asphalt Aluminum Ship Bottom Antirust Paint | Asphalt Aluminum Ship Bottom Antirust Paint Asphalt aluminum boat bottom coating, aluminum boat hull coating, aluminum boat hull paintis made of... |
Same products
 |
GT-FM24-PLC填粉机机(3+9+9+3)三导管 | 卖方: 肇庆古雷特科技有限公司 | * 描述 GT-FM-PLC（6-48工位三导管）氧化镁粉灌装机，是在GT-FM-PLC（6-48工位双导管）的基础上改进而成。 双导管灌装机与三导管灌装机的主要区别如下： 三导管灌装机可以在一... |
 |
High Speed Flat Wire Coil Winding Machine for EV Traction Motor Manufacturing | 卖方: Eurion Automation Co., Ltd. | 高精度伺服控制系统：采用工控级电脑控制平台，配套进口伺服电机与减速机，确保运行高效、精准、稳定。 六轴联动结构设计：送线轴、绕线轴、排线轴及手臂成型轴独立控制、协同配合，实现多工序复合成型。 ... |
 |
GT-FM18-PLC灌装机(8+2+8)三导管 | 卖方: 肇庆古雷特科技有限公司 | * 描述 GT-FM-PLC（6-48工位三导管）氧化镁粉灌装机，是在GT-FM-PLC（6-48工位双导管）的基础上改进而成。 双导管灌装机与三导管灌装机的主要区别如下： 三导管灌装机可以在一... |
 |
48工位填粉机 GT-FM48 | 卖方: 肇庆古雷特科技有限公司 | * 描述FM灌装机适用于长长度、不同直径的管式加热器的灌装。 FM填充机填充的加热器具有高密度，根据直径、氧化镁粉末、填充速度，密度可达2.3g/cm3。 FM灌装机有双导管灌装机和三导管灌装机... |
 |
8工位填粉机 GT-FM8 | 卖方: 肇庆古雷特科技有限公司 | * 描述 FM灌装机适用于长长度、不同直径的管式加热器的灌装。 FM填充机填充的加热器具有高密度，根据直径、氧化镁粉末、填充速度，密度可达2.3g/cm3。 FM灌装机有双导管灌装机和三导管灌装... |
