Development System of BMC Rotor Mould
At present, in the development process of BMC mold, the BMCcompositematerial is thermosetting resin. In the process of mold heating and curing, because of the expansion performance of BMC material, the pressure in the mold cavity suddenly increases, which makes it difficult to demould the BMC products, and the products are difficult to separate from the mold. Especially some products with long straight surface can not separate from the mold, resulting in die scrap and product development failure.
The BMC Rotor Mold can successfully complete the production process. Compared with the existing technology, it has the following advantages: there is a long straight surface product in the BMC rotor moulding, so it can not be separated from the mold, and it can be used when it can not set a large demoulding slope on the product surface. In the process of mold locking, the lock insert is locked up and down through the lock surface, so that the insert will have a fully fitted balance state, and the fit between the insert and the middle sleeve plate will leave a large space for fit clearance, which effectively prevents the die expansion during the injection molding process. When opening the die, the lock surface is removed and the insert is peeled off from the product quickly, so that the ejection production process can be completed smoothly and the stability of the whole die can be further improved.
If you want to know more details of bulk molding compound process, please visit our website.
在线联系供应商
Other supplier products
 |
BMC/SMC Products | BMC/SMC Products Description: SMC, BMC thermosetting plastic products are produced by SMC and BMC plastic molding process. What is smc plastic？plas... |
 |
SMC Antenna Reflector Mould | The satellite earth antenna is the important earth satellite equipment to collect the weak signal from satellite and reduce noise to the lowest lev... |
 |
Insulation Mold | Mainly for injection molding, the cavity pressure should be considered as small as possible when designing the runner and the parting surface. Sinc... |
 |
BMC, SMC, GRP, GFK Roof Tiles | BMC, SMC, GFK, GRP roofing materials are glassfiber reinforced plastic, also known as glassfiber roof, which are composed of resin and glassfiber. ... |
 |
BMC/SMC Motor | BMC/SMC Motor Description BMC plastic edging motor replaces traditional iron and aluminum, reduces the process, seals more, and has higher safet... |
Same products
 |
Cordless high pressure lithium battery portable car washer cleaner | 卖方: Shenzhen Jixin Auto Trading Co., Ltd. | Cordless high pressure lithium battery portable car washer cleaner The portable washing gun is n... |
 |
Auto cordless battery inflator pump | 卖方: Shenzhen Jixin Auto Trading Co., Ltd. | Auto cordless battery inflator pump for air bag and bed It can also be used in multiple scenario... |
 |
2025 Voyah FREE Extended range electric vehicle EREV | 卖方: Shenzhen Jixin Auto Trading Co., Ltd. | 2025 Voyah FREE Extended range electric vehicle EREV Active Safety •ABS anti lock brakin... |
 |
Windshield FilmWindshield Film | 卖方: Beijing Kingfilm Advanced Material Co., Ltd | Windshield Film The automotive windshield film is installed on the outside of the windshield and ... |
 |
Metallized Window Tint | 卖方: Beijing Kingfilm Advanced Material Co., Ltd | Metallized Window Tint The multi-layer magnetron sputtering double silver series has the charact... |
