Coolant Temperature Sensors
The coolant temperature sensor, with its slender head in contact with the coolant, is installed in the coolant jacket or pipeline of the engine block. Its interior is equipped with a thermistor with a negative temperature coefficient. When the engine coolant temperature increases gradually, the resistance value of the thermistor will gradually decrease, on the contrary, it will increase. As a result, when the engine coolant temperature changes, the output voltage of this sensor will also change accordingly. After receiving the signal from the coolant temperature sensor, the ECU corrects the injection time and ignition time of the engine.
Vehicle with a car coolant temperature sensormanufatured by MAPMS has advantages. It can timely sense and remind the owner of the wrong ignition time, coolant temperature, fan failure, etc. as this temperature gauge sensor caris very sensitive. In addition, it can also prevent problems from happening. The coolant temperature can be seen directly on the instrument panel. When there is an abnormality, the owner can find it in time so as to prevent the car radiator from boiling.
Coolant Temperature Sensors Features
Vehicle with temp sensor carmanufatured by MAPMS has some advantages.
It can timely sense and remind the owner of the wrong ignition time, coolant temperature, fan failure, etc. as this sensor is very sensitive.
In addition, it can also prevent problems from happening. The coolant temperature can be seen directly on the instrument panel.
When there is an abnormality, the owner can find it in time so as to prevent the car radiator from boiling.
What Are the Symptoms of a Bad Coolant Temperature Sensors ?
Low Temperature
Under cold conditions, the engine is difficult to start, the idle speed is unstable, and the power is insufficient during acceleration. The reason is that when the engine ECI cannot receive the normal signal from the coolant temperature sensor, will perform the safety insurance function in order to maintain the engine running. At this moment, ECI draws the substitute value of coolant temperature (80 ~ 90 ℃) stored in the memory as the coolant temperature value. Therefore, when the engine is cold, there is a lack of increase related to low engine temperature in the fuel injection quantity controlled by ECI, so that the mixture is thin, cause trouble starting and other faults.
Engine Malfunction
Under the condition of hot engine, the power is normal when the engine starts, idles and accelerates. However, the engine fault indicator is always on and the electric fan does not work.
Open or Short Circuit Fault
In case of open or short circuit fault, the electronic fan will rotate at high speed.
If you need any kinds of car auto spare parts, please contact us, as a professional auto spare parts supplier, MAPMS is willing to offer you high quality products.
在线联系供应商
Other supplier products
 |
Automotive Fuel System Parts | Automobile fuel supply systemis classified according to fuel supply mode: carburetor engine, EFI engine and in cylinder direct injection engine, su... |
 |
Ultrasonic Sensors | Ultrasonic sensors convert ultrasonic signals into other energy signals usually electrical signals, and have the dual functions of transmitting and... |
 |
Tire-Pressure Monitoring System (TPMS) | The system has become a mandatory configuration for new vehicles throughout the United States and Europe. It is directly integrated in the on-board... |
 |
Power Window System for Car | One is a master switch, which can be controlled by the driver to lift the glass of each power window system for car the other is a sub-switch, whic... |
 |
Airbag Clockspring | The airbag clockspring is a piece of wire harness that connects the main airbag to the airbag harness. Since the main airbag needs to rotate with t... |
Same products
 |
Storage tank roofs options from ZHAOYANG | 卖方: 854818 | Storage tank roofs options from ZHAOYANG The aluminumgeodesic dome roofsare a self-supporting cov... |
 |
CSTR Anaerobic Reactor | 卖方: 854818 | CSTR Anaerobic Reactor The Continuous Stirred Tank Reactor (CSTR) is a type of anaerobic reactor ... |
 |
Aeration Tank | 卖方: 854818 | Aeration Tank The aeration tankuses the activated sludge process for sewage treatment. The tank ... |
 |
Residential Water Storage Tank | 卖方: 854818 | Residential Water Storage Tank For the storage of water in residential areas, Residential Water ... |
 |
Glass Lined Steel Continuous Stirred Tank Reactors (CSTRs) for Industrial Biogas Plants | 卖方: Wansheng Environmental Protection Engineering Co., Ltd | GFS tanksare assembled on-site from specialized enamel steel plates, hoops, self-locking bolts, s... |
