.

REFRIGERATED AIR DRYER FOR AIR COMPRESSOR

The characteristics determined by the partial pressure of water vapor in compressed air and the temperature of compressed air are used for cooling, dehydration and drying. While keeping the compressed air pressure basically unchanged, lowering the temperature of the compressed air can reduce the water content in the compressed air, and the excess water vapor will condense into liquid. The refrigerated dryer uses this principle to dry compressed air using refrigeration technology, so the refrigerated dryer has a refrigeration system.

Refrigerated air dryer working

Refrigerated air dryer how it works

The refrigerated dryer sucks the low-pressure (low-temperature) refrigerant in the evaporator into the compressor cylinder. After the refrigerant vapor is compressed, the pressure and temperature increase at the same time; the high-pressure and high-temperature refrigerant vapor is pressed to the condenser. The higher temperature refrigerant steam exchanges heat with the lower temperature cooling water or air. The heat of the refrigerant is taken away by water or air and condensed, and the refrigerant vapor becomes a liquid.

This part of the liquid is then transported to the expansion valve, flows through the expansion contact into a low-temperature and low-pressure liquid and enters the evaporator; in the evaporator, the low-temperature, low-pressure refrigerant liquid absorbs the heat of the compressed air and vaporizes (commonly known as "evaporation") , and the compressed air condenses out a large amount of liquid water after being cooled; the refrigerant vapor in the evaporator is sucked away by the compressor, so that the refrigerant goes through four processes of compression, condensation, throttling, and evaporation in the system, thus Completed a cycle.

For more information about refrigerated air dryer manual and buy refrigerated air dryer, please feel free to contact us!

There are many scroll air compressor suppliers, but we are one of the best choices for you.



在线联系供应商

至: CMN Technology Co.,Ltd
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

Oil Injected Air Compressor
Oil Injected Air Compressor Oil Injected compressorare widely used in various industries to provide compressed air power. CMN oil injected screw air compressor adopts patented...
REFRIGERATED AIR DRYER FOR AIR COMPRESSOR
REFRIGERATED AIR DRYER FOR AIR COMPRESSOR The characteristics determined by the partial pressure of water vapor in compressed air and the temperature of compressed air are used for cooling,...
OIL INJECTED SCREW COMPRESSOR
OIL INJECTED SCREW COMPRESSOR The advantages of CMN oil injected screw compressorare reflected in its outstanding energy-saving effect and variable frequency performance. The un...
Oil Free Air Compressor
Oil Free Air Compressor The entire series of CMN oil free compressor in chinaare certified by German TUV Rheinland for oil-free, in cordinate with level of Class 0. Unlike...
OILLESS SCROLL TYPE AIR COMPRESSOR
OILLESS SCROLL TYPE AIR COMPRESSOR CMN scroll style compressorhas an air supply pressure of 2 to 12 bar, a gas production volume of 255 to 1660L/min, and an ultra-quiet design. CMN o...
供应产品

Same products

Heavy Copper PCB Manufacturer
Heavy Copper PCB Manufacturer 卖方: Xinfeng Huihe Circuits Co., Ltd. Heavy Copper PCB, pcb fabrication up to 12oz, large current, pcb circuitfabrication base material...
8 Layer ENIG Half Hole Custom PCB
8 Layer ENIG Half Hole Custom PCB 卖方: Xinfeng Huihe Circuits Co., Ltd. Number of layers: 8 Surface finish: ENIG Base material: FR4 Outer Layer W/S: 4/3mil Inner lay...
4 Layer ENIG Impedance Control Half Hole PCB Electric Circuit Board
4 Layer ENIG Impedance Control Half Hole PCB Electric Circuit Board 卖方: Xinfeng Huihe Circuits Co., Ltd. Number of layers: 4 Surface finish: ENIG Base material: FR4 Outer Layer W/S: 6/4mil Inner lay...
4 Layer ENIG Impedance Control Half Hole Fr4 PCB
4 Layer ENIG Impedance Control Half Hole Fr4 PCB 卖方: Xinfeng Huihe Circuits Co., Ltd. Number of layers: 4 Surface finish: ENIG Base material: FR4 Outer Layer W/S: 6/3.5mil Inner l...
2 Layer OSP Impedance Control Half Hole PCB
2 Layer OSP Impedance Control Half Hole PCB 卖方: Xinfeng Huihe Circuits Co., Ltd. Number of layers: 2 Surface finish: OSP Base material: FR4 Outer Layer W/S: 6/4mil Thickness:...