.

GSET-551 Steel Wire Eddy Current Flaw Detector

GSET-551 Steel Wire Eddy Current Flaw Detector Brief Introduction

 

Using the eddy current signal processing method and high-performance DSP algorithm, the wire rope NDT tester detection ability of micro-crack is as high as 0.05mm deep crack.

 

Using computer digital technology and "digital eddy current detection technology" to achieve high-speed data processing capabilities, detection speed can be reached to 1~500m/min.  Technology can effectively suppress all kinds of interference signals. It has waveform, amplitude, phase, X-axis and Y-axis signals.

 

The professional "digital filtering" is adopted to effectively suppress the interference signal in the field and ensure the accuracy and stability of the detection.

 

 

Features of GSET-551 Steel Wire Eddy Current Flaw Detector

 

 

The detector detects the minimum metal cross-sectional area change and the minimum length of the damage length corresponding to the local damage.

 

 

 

 

The detector detects the minimum metal cross-sectional area change and the damage length minimum size corresponding to the metal cross-sectional area loss.

 

 

 

 

The maximum value of the random error obtained by performing multiple consecutive measurements of the same metal cross-sectional area change in the same test sample under the same test environment and conditions within the instrument range.

 

 

 

 

Within the range of the instrument, the metal cross-sectional area of the test sample is linearly proportional to the absolute value of the maximum deviation between the measured curve of the instrument and the calibration curve fitted by the measured value of the cross-sectional area of the metal.

 

 

 

 

The value of the metal cross-sectional area loss measured by the instrument minus the actual value of the metal cross-sectional area loss within the instrument's range.

 

 

 

 

In the range of the instrument range, under the condition of the length loss of the cross-sectional area of the metal, the cross-sectional area loss of the metal on the wire rope measured by the detector is matched with the value of the loss of the cross-sectional area of a group of wire ropes measured by the instrument. The absolute value of the maximum deviation between the calibration curves.

 

 

 

 

The detector is capable of detecting the resolved minimum distance.

 

 

 

 

The detector can detect and display changes in metal cross-sectional area loss (LMA) on one channel, and detect and display local damage (LF) on the other channel. The detector recording device can be a computer, graphic recorder or other matches. device.

 

 

 

 

The detector cannot simultaneously detect and display metal cross-sectional area loss changes and local damage, and can only detect and display one of them. The detector recording signal device can be a computer, a graphic recorder or other matching devices.

 

 

 

 

The detector principle and composition meet the requirements of the GB/T 21837-2008 standard, and it has a detector for detecting distance display, data storage or recording function.

GSET-551 Steel Wire Eddy Current Flaw Detector performance

 

Detection channel

Single-channel

Detection speed

1~500m/min(on-line)

Frequency range

100Hz-10MHz

gain

0~99dB,step size 0.1dB

Advanced filtering

have

High pass

  1. ~650Hz

Low pass

1Hz~10000Hz

Phase rotation

0-360 ° step 1 °

 

Synchronized alarm output controlled by an internal and external clock

High precision end and end-to-tail signal removal

High precision real-time, delayed alarm output

Fast digital/analog electronic balance

Memory track delay blanking function

Real-time impedance plane display

The instrument a match any probe

Remote automatic help system

Computer full digital parameter adjustment

Non-equal amplitude phase/amplitude alarm domain

Eddy Current Testing Equipment

ECT Eddy current testing is a non-contact testing method, which mainly uses the electromagnetic field and electromagnetic induction between metals to detect. It is one of the NDT non-destructive testing methods in the industry.

 

Why BKN NDT Testing Equipment

 

The technology of BKN originated from eddy current Laboratory of Institute of Materials, Nanjing University of Technology. At present, it is a leading high-tech ultrasonic testing equipment manufacturers in China. The company is committed to the development of eddy current, ultrasonic, magnetic flux leakage and various non-standard equipment, holding independent research and development of a number of national patents.



在线联系供应商

至: Nanjing BKN Automation System Co.,LTD
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

Drill Pipe Magnetic Flux Leakage Detector MFL-308
Drill Pipe Magnetic Flux Leakage Detector MFL-308 Specifications: diameter Φ73 / Φ89 mm, length 9.6m or so Detection speed: 6-20 m / min Acceptance criteria: American Petroleum Institute ...
Eddy Current Testing Equipment
Eddy Current Testing Equipment Automatic EDM Notchis the ideal equipment for processing artificial defects of pipe rod standards in non-destructive testing work. The flaw detecto...
GSET-551 Steel Wire Eddy Current Flaw Detector
GSET-551 Steel Wire Eddy Current Flaw Detector GSET-551 Steel Wire Eddy Current Flaw Detector Brief Introduction Using the eddy current signal processing method and high-performance DSP alg...
Eddy Current Testing Equipment
Eddy Current Testing Equipment ECT Eddy current testingis a non-contact testing method, which mainly uses the electromagnetic field and electromagnetic induction between metals t...
Steel Bar Testing
Steel Bar Testing The steel bar is rolled by a rolling mill and produce both surface defects and internal defects during the rolling process. The internal defect is ...
供应产品

Same products

iX361 中框校正夹
iX361 中框校正夹 卖方: 深圳维客修有限公司 Fixes iCF6/iA3/iX16/iX361手机屏幕中框维修治具。iFixes iCF6免加热开屏器用于手机液晶拆解无需加热。iFixes iX361中框矫正维修平台。iFixes IA3...
单相电表测试仪
单相电表测试仪 卖方: 782364 GF112D是一种单相手持式电子电表测试装置,精度等级为0.05、0.1或0.2,用于现场测试单相电表误差。测量范围从1mA到120A, 0到600V,也可用于测试交流参数—&mda...
单相电表测试仪
单相电表测试仪 卖方: 782364 GF112D是一种单相手持式电子电表测试装置,精度等级为0.05、0.1或0.2,用于现场测试单相电表误差。测量范围从1mA到120A, 0到600V,也可用于测试交流参数—&mda...
单相电表测试仪
单相电表测试仪 卖方: 782364 GF112D是一种单相手持式电子电表测试装置,精度等级为0.05、0.1或0.2,用于现场测试单相电表误差。测量范围从1mA到120A, 0到600V,也可用于测试交流参数—&mda...
数字轨距
数字轨距 卖方: Wuhan linkage track equipment co.,ltd 产品描述 数显轨头磨损仪主要用于测量钢轨的垂直磨损和横向磨损,设计合理,重量轻,操作方便,读数直观。 特征 1.数字直读式:LCD显示屏,清晰易读;无需计算,直接读数;读数时,按住...