GSET-551 Steel Wire Eddy Current Flaw Detector
GSET-551 Steel Wire Eddy Current Flaw Detector Brief Introduction
Using the eddy current signal processing method and high-performance DSP algorithm, the wire rope NDT tester detection ability of micro-crack is as high as 0.05mm deep crack.
Using computer digital technology and "digital eddy current detection technology" to achieve high-speed data processing capabilities, detection speed can be reached to 1~500m/min. Technology can effectively suppress all kinds of interference signals. It has waveform, amplitude, phase, X-axis and Y-axis signals.
The professional "digital filtering" is adopted to effectively suppress the interference signal in the field and ensure the accuracy and stability of the detection.
Features of GSET-551 Steel Wire Eddy Current Flaw Detector
The detector detects the minimum metal cross-sectional area change and the minimum length of the damage length corresponding to the local damage.
The detector detects the minimum metal cross-sectional area change and the damage length minimum size corresponding to the metal cross-sectional area loss.
The maximum value of the random error obtained by performing multiple consecutive measurements of the same metal cross-sectional area change in the same test sample under the same test environment and conditions within the instrument range.
Within the range of the instrument, the metal cross-sectional area of the test sample is linearly proportional to the absolute value of the maximum deviation between the measured curve of the instrument and the calibration curve fitted by the measured value of the cross-sectional area of the metal.
The value of the metal cross-sectional area loss measured by the instrument minus the actual value of the metal cross-sectional area loss within the instrument's range.
In the range of the instrument range, under the condition of the length loss of the cross-sectional area of the metal, the cross-sectional area loss of the metal on the wire rope measured by the detector is matched with the value of the loss of the cross-sectional area of a group of wire ropes measured by the instrument. The absolute value of the maximum deviation between the calibration curves.
The detector is capable of detecting the resolved minimum distance.
The detector can detect and display changes in metal cross-sectional area loss (LMA) on one channel, and detect and display local damage (LF) on the other channel. The detector recording device can be a computer, graphic recorder or other matches. device.
The detector cannot simultaneously detect and display metal cross-sectional area loss changes and local damage, and can only detect and display one of them. The detector recording signal device can be a computer, a graphic recorder or other matching devices.
The detector principle and composition meet the requirements of the GB/T 21837-2008 standard, and it has a detector for detecting distance display, data storage or recording function.
GSET-551 Steel Wire Eddy Current Flaw Detector performance
|
Detection channel |
Single-channel |
|
Detection speed |
1～500m/min(on-line) |
|
Frequency range |
100Hz-10MHz |
|
gain |
0～99dB，step size 0.1dB |
|
Advanced filtering |
have |
|
High pass |
|
|
Low pass |
1Hz～10000Hz |
|
Phase rotation |
0-360 ° step 1 ° |
|
Synchronized alarm output controlled by an internal and external clock |
|
High precision end and end-to-tail signal removal |
|
High precision real-time, delayed alarm output |
|
Fast digital／analog electronic balance |
|
Memory track delay blanking function |
|
Real-time impedance plane display |
|
The instrument a match any probe |
|
Remote automatic help system |
|
Computer full digital parameter adjustment |
|
Non-equal amplitude phase／amplitude alarm domain |
Eddy Current Testing Equipment
ECT Eddy current testing is a non-contact testing method, which mainly uses the electromagnetic field and electromagnetic induction between metals to detect. It is one of the NDT non-destructive testing methods in the industry.
Why BKN NDT Testing Equipment
The technology of BKN originated from eddy current Laboratory of Institute of Materials, Nanjing University of Technology. At present, it is a leading high-tech ultrasonic testing equipment manufacturers in China. The company is committed to the development of eddy current, ultrasonic, magnetic flux leakage and various non-standard equipment, holding independent research and development of a number of national patents.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
BKNFX Pre-Multi-Frequency Eddy Current Hardness Separator | Stimulating the coil makes a magnetic induction to the tested material. The induced electromotive force received by the testing coil is related to ... |
 |
Benchtop Magnetic Flux Leakage Testing Equipment | MFI Magnetic flux leakage test refers to the formation of a leakage magnetic field on the surface of a test piece after it is magnetized due to def... |
 |
Eddy Current Testing for Auto Parts | NDTApplication: Eddy current hardness testingtechnology has been widely used in the detection of metal components in the automotive The eddy cur... |
 |
GSET-551 Steel Wire Eddy Current Flaw Detector | GSET-551 Steel Wire Eddy Current Flaw Detector GSET-551 Steel Wire Eddy Current Flaw Detector Brief Introduction Using the eddy current signa... |
 |
Benchtop Magnetic Flux Leakage Testing Equipment | BKN is one of professional ultrasonic testing equipment manufacturers. We provide Magnetic Flux Leakage Testing, ndt device, ndt testingand so on. ... |
Похожие товары
 |
iX361 клипса для коррекции середины кадра | Продавец: С. так потрясена, что Technology Co.,Ltd. | Исправляет приспособление для ремонта рамки экрана мобильного телефона iCF6/iA3/iX16/iX361. Устро... |
 |
Прибор с однофазным счётчиком | Продавец: 782364 | GF112D является 0,05, 0,1 или 0,2, Из-за того, что вы сказали, что у вас проблемы с самооценкой? ... |
|
|
пожалуйста | Продавец: 782364 | GF112D является 0,05, 0,1 или 0,2, Из-за того, что вы сказали, что у вас проблемы с самооценкой? ... |
|
|
пожалуйста | Продавец: 782364 | GF112D является 0,05, 0,1 или 0,2, Из-за того, что вы сказали, что у вас проблемы с самооценкой? ... |
 |
Digital Track Gauge | Продавец: Wuhan linkage track equipment co.,ltd | 产品描述 数字轨头耐磨计主要用于测量钢轨的垂直磨损和横向磨损。合理的设计使其轻巧，操作方便，阅读直观。 特征 1、直读数字型：液晶显示屏，清晰可读;无需计算，可直接读取;读数时，按... |
