PTFE Extruded Tube
PTFE Extruded Tube
Polytetrafluoroethylene extrusion tube process.
mixing: through the mixing machine to polytetrafluoroethylene powder and extruder mix.
storage: storage at 25℃ for 24 hours.
extrusion molding: extrusion molding through the extruder.
sintering: the product into the sintering furnace for sintering.
cooling: after sintering cooling.
The polytetrafluoroethylene pipe produced by extrusion process solves the problem of poor shrinkage of polytetrafluoroethylene pipe under heat, which can not effectively improve the corrosion resistance, electrical insulation and anti-viscosity of the workpiece.
Specification of theExtruded PTFETube
|
Product name |
Speciations(mm) |
Remarks |
||
|
Diameter |
Length |
|||
|
PTFE pipe |
Molded tube |
Outer: 20-600 |
100-250 |
|
|
Hydraulic tube |
Outer: 50-300 |
500-1000 |
Diameter needs machine processing |
|
|
Extruded tube |
Outer: 30-200 |
<2000 |
the length can be customized as customer's requirement |
|
The Technical Indexes of the PTFE Extruded Tube
|
Properties |
The implementation of standards |
The technical performance index |
Remarks |
||
|
The proportion of |
Tensile strength(Mpa) |
Crack elongation(%) |
|||
|
Molded rods |
ZBG33003 SFB-1 |
≥14 |
≥140 |
QB/T 3626-1999 Light industry standard |
|
|
Molded pipe |
Company standard |
≥15 |
≥150 |
||
|
Hydraulic rod/tube |
Company standard |
≥14 |
≥150 |
||
|
Extrusion rods/tube |
Company standard |
≥15 |
≥150 |
||
Usage of Extruded PTFETubing
Mixing: through the mixing machine to polytetrafluoroethylene powder and extruder mix.
Storage: storage at 25℃ for 24 hours.
Extrusion molding: extrusion molding through the extruder.
Sintering: the product into the sintering furnace for sintering.
Cooling: after sintering cooling.
The polytetrafluoroethylene pipe produced by extrusion process solves the problem of poor shrinkage of polytetrafluoroethylene pipe under heat, which can not effectively improve the corrosion resistance, electrical insulation and anti-viscosity of the workpiece.
If you want to know more kinds of plastic industrial products, please visit our website.
As a ptfe product supplier, we will do our best to meet all the needs of customers.
在线联系供应商
Other supplier products
 |
PTFE Gasket | A purePTFE gasketis a type of sealing component made from PTFE material, which is a synthetic fluoropolymer known for its excellent chemical resist... |
 |
PTFE Rods/Bars | PTFE (polytetrafluoroethylene) rods/bars are widely used in industries such as engineering, electronics, and chemical processing, where their excep... |
 |
PTFE Slide Bearing Plate | PTFE Slide Bearing Plates The product is made of PTFE suspended fine powder resin, cold pressed into billet, sintering forming, pressing grease gr... |
 |
PTFE Extruded Tube | Extruded PTFE tubeis frequently employed when a uniform wall thickness is required throughout the entire length of the tube. The polytetrafluoroeth... |
 |
PTFE Ring | PTFE Ring PTFE sealing products not only can seal oil fluid, can also seal water a class of fluids, including strong acid, strong alkali, strong c... |
Same products
 |
Medical Plastic Parts | 卖方: Packson Mold Co.,Ltd | Project Management To be a qualified medical plastic components manufacturer, the most advanced ... |
 |
PA66 GF15 Heat Stabilized (A2006C, A2016C) for Engineering Plastics | 卖方: Suzhou Anmei Material Technology Co., Ltd | PA 66 GF 15is a 15% glass fiber reinforced, heat-resistance, polyamide 66 resin for injection mol... |
 |
PA66 GF | 卖方: Suzhou Anmei Material Technology Co., Ltd | Anmei focuses on the production of modified engineering plastics. We have polyamide pa6 6gfmodif... |
 |
Nylon6 PA6 | 卖方: Suzhou Anmei Material Technology Co., Ltd | Other than fiber-reinforced pa6 polyamide, the unreinforced nylon type 6 produced by Anmei, one o... |
 |
Nylon 66 Pa66 With High Tensile Strength (A2307X01, A2317X01) for Engineering Plastics | 卖方: Suzhou Anmei Material Technology Co., Ltd | Using Polyamide 66 as the basic resin, the tensile strength of nylon 66 is obtained by blending a... |
