.

Small Batch Simple Injection Mold

ItemsDescriptionMould typeSmall batch simple moldService life1000 PCSMold size(mm)200*300Number of Cavities1+1Runner TypeCold RunnerTool SteelP20Mold Base TypeS45CSurface finishGlossyPart MaterialABSApplied rangeindustrial productsCustomized Product DetailsABS open mold injection molding mold temperature: The cooling of the product is very good and has a great influence on the quality. Therefore, the mold temperature must be able to accurately control the process. If possible, the mold temperature should be higher. Holding time and molding cycle: In the case of satisfying the filling of the product without generating depressions or bubbles; Should be as short as possible to minimize the residence time of the melt in the barrel Other problems in the open mold injection molding process, in order to prevent the deterioration of the surface quality, Generally use less mold release agent for injection molding , when using recycled materials no more than 20%. For products other than pet, the product should be post-treated to eliminate internal stress, and pmma should be dried in 70-80t hot air for 4 hours; Pc should be heated 110-135 ° C in clean air, glycerin, liquid paraffin, etc., depending on the product, the maximum time is more than 10 hours. And pet must undergo a biaxial stretching process in order to obtain good mechanical properties. For precision grinding of precision molds with a dimensional tolerance of 0.01 mm or less, pay attention to the influence of ambient temperature, Constant temperature grinding is required. It can be seen from the calculation that the steel with 300mm length has a temperature difference of about 10.8μm when the temperature difference is 3°C (10.8=1.2×3×3,1.2μm/°C per 100mm deformation) , Every finishing process needs to fully consider the impact of this factor.



在线联系供应商

至: 佛山市鸿盛鼎美模具有限公司
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

Small Batch Simple Injection Mold
Small Batch Simple Injection Mold ItemsDescriptionMould typeSmall batch simple moldService life1000 PCSMold size(mm)200*300Number of Cavities1+1Runner TypeCold RunnerTool SteelP20Mo...
供应产品

Same products

HDPE Blue Drums Scrap
HDPE Blue Drums Scrap 卖方: Nelson De-Scrap, Inc Are you looking for HDPE Drums or any other type of scraps and then you are welcome to our compan...
Magnetic Level Gauge
Magnetic Level Gauge 卖方: Feejoy Technology (ShangHai) Co.,Ltd., FEEJOY Magnetic Level Gauge is usually used for medium level detection of various towers, tanks, ...
Level Transmitter
Level Transmitter 卖方: Feejoy Technology (ShangHai) Co.,Ltd., Best Quality Level Transmitter Suppliers FEEJOY level transmitter is a sensor with electrical tra...
Level Switch
Level Switch 卖方: Feejoy Technology (ShangHai) Co.,Ltd., Best Quality Level Switch Manufacturer FEEJOY level switch is a sensor mainly used for the detect...
Flow Transmitter
Flow Transmitter 卖方: Feejoy Technology (ShangHai) Co.,Ltd., FEEJOY Flow Meters is a high-precision and repeatable flow measuring instrument used to measure t...