Amphoteric Flocculants

SINOFLOC amphoteric flocculants are partially hydrolyzed polyacrylamide with high molecular weight. This amphoteric polyacrylamideis easily to remove both the positive and negative charged contents particles in a suspension solution.

Amphoteric Polyacrylamide (pam powder) Specifications

Products	Product Code	Cationic Charge	Anionic Charge	Molecular Weight
Amphoteric PAM Powder	SINOFLOC 502	Low	Medium	High

Amphoteric polyacrylamide also called zwitterionic polyacrylamide or dipolar ionic polyacrylamide. The molecular chain of the amphoteric flocculant has two or more functional groups, of which have at least one anionic charge and one cationic charge. Unlike other mono-ionic polyacrylamides that only form either a cationic or anionic charges, the amphoteric polyacrylamide simultaneously have both ionic states.

Amphoteric polyacrylamide is copolymerized by acrylic cationic monomer and acrylamide monomer. The anionic charge forms after the hydratization of the acrylamide monomer, and the cationic charge forms from the acrylic monomer. Thus, the amphoteric polyacrylamide has both positive and negative charges on its molecular chain.

Main applications of Amphoteric Flocculants

SINOFLOC amphoteric flocculants could be used for municipal wastewater treatment and industrial wastewater treatment. Our products have both anionic and cationic charges on the same macromolecule and could be used to remove both positively and negatively charged contaminant in suspensions.

Amphoteric polyacrylamide has been widely used for industrial water treatment, oil refinery plants and mining etc. Amphoteric polyacrylamide has a better performance and efficiency than the mono-ionic polyacrylamide, especially when the water condition is complicated, or the water condition is keep changing, because its ability to decrease the surface tension of the water is way better. And the performance is stable when the water condition changes.

In some special cases, it usually needs to use anionic flocculants and the cationic flocculants synchronously to reach a better effect of the clarification, however, these added anionic flocculants and the cationic flocculants could react with each other and form precipitation and then lead a poor flocculate result. The amphoteric flocculants could easily avoid the problem due to its zwitterionic nature. It could create both charges without casing precipitation. And it’s even easier to operate during the treatment, time saving and labor saving.

As the municipal waste water also has more and more complicated composition, the sludge dewatering requires a higher performance agent. At this circumstance, the simply cationic flocculants is not suitable any more, instead many tests and feedbacks show the amphoteric agent works very well.

The newly developed application is for the oilfield, facts prove that amphoteric polyacrylamide could be used for profile control, water plugging, friction reduction and also the treatment for the fluid.

Packaging - Storage

In 25 kg Kraft bags or PE valve bags or 750 kg big bags. The product should be kept dry place and the storage temperature is 0oC to 35oC, away from direct sunlight and moisture.

Products Feeding

The solutions of SINOFLOC amphoteric polymer must be prepared in suitable plants equipped with dry powders feeding and dispersion units and with continuous and moderate agitation. The dissolution water must have a temperature included between 10°C and 40°C; For a correct use of SINOFLOC amphoteric polyelectrolyte and in order to achieve the best possible results, it is necessary to allow a “maturation” time of 60 minutes. When treating turbid water, the flocculants solution must be added to the water in a point of average turbulence, in order to achieve a thorough and homogeneous mixing without impairing the flock formation. Recommend operating concentration is 3g/l, and the maximum operating concentration is 15g/l. For an optimum performance on specific applications on amphoteric flocculants, please consult with SINOFLOC team.

FAQ

What is the Charge Range of Sinofloc Amphoteric Polyacrylamide?

Sinofloc is supplying amphoteric powder flocculants with cationic charge of 5-10% and anionic charge of 20-30%.

What is the Main Characteristics of Sinofloc Amphoteric Polymer?

What's the Relationship between Amphoteric Polyacrylamide and Cationic/Anionic Polyacrylamide?

What are Dissolving Tips for Sinofloc Amphoteric Flocculants?

What's the Main Application for Amphoteric Flocculants?

Can Amphoteric Polyacrylamide Be Used in Paper Industry?

What's the Flocculation Principle?

What's the Amphoteric Flocculants Application Feature for Sludge Dewatering?

Could Sinofloc Amphoteric Flocculants Be Used as Water Plugging Agent?

How to Storage Amphoteric Polyacrylamide Well?

How is Sinofloc Service Team?

Shipping

Instructions

Flocculation Precipitation

Flocculation precipitation is the process of flocculation and precipitation of particles in water. When feeding flocculants or coagulant in water, the colloidal and dispersed particles of suspended particles forms flocs under the interaction of molecular force, and they collide and flocculate in the process of sedimentation. The volume and quality of sedimentation increase and sink speed increases. The removal rate of suspended matter depends not only on the velocity of precipitation, but also on the depth of precipitation.

Chemical Feeding

Gravity feeding is to use the gravity to add the agent to the water suction pipe of the water pump or the water absorption well, and use the impeller of the pump to mix. Pressure feeding is to use water pump or water jet to put the chemicals into the original water pipe, which is suitable for putting the chemicals into the pressure water pipe, or we need to add them to the water purification structures with higher elevation and distance. Pump feeding is to use pump is to raise the liquid to the pressure tube in the solution pool. It has a direct use of the metering pump and the use of acid resistance to enhance the effect.

If you want to know more applications of oilfield chemicals, please contact us.

Other supplier products

	北京中絮化工有限公司	经过多年的稳步增长和扩张，北京中福集团已成为中国领先的水溶性 聚合物制造商和供应商。公司现有两套生产设备，年生产絮凝剂和混凝 剂100,000吨。我们提供的聚合物广泛应用于城市和工业水处理，石油 ，中絮化工和天然气，采矿等领域。造纸、糖和SAP用于物理卫生和农业使用等。 我们有一一个团...
	Superabsorbent for Agriculture	SINOFLOC is committed to being customer's most reliable supplier who could provide an extensive range of oilfield chemicalsand services, with high-...
	Superabsorbent for Agriculture	The demand of conserving water resources is increasing along with the shortage of water resources all over the world. As one of the leading Superab...
	Drilling Fluid Additives	SINOFLOC water-based drilling fluids additives are specially developed to meet customer’s critical needs of maximum performance and compatibi...
	Nonionic Flocculants for Industrial Wastewater Treatment	SINOFLOC nonionic flocculants are high and very high molecular weight nonionic polymers, in dry powder character. Our products have been specially ...

供应产品

Same products

	KLUBER Microlube GL 261 400g Special Lubricating Greases on a Mineral Oil Base	卖方: 广东聚广恒自动化设备有限公司	KLUBER ISOFLEX TOPAS NCA52400G400G/PC 10PC/Carton KLUBER ISOFLEX TOPAS NCA52 1KG1KG/PC 12PC/Cart...
	MOBIL GREASE XHP 222 16KG Industrial Grease	卖方: 广东聚广恒自动化设备有限公司	XHP 220 lithium-complex greases are designed for a broad range of applications in diverse industr...
	Castrol Molub-Allloy Paste TA 1KG High temperature Lubricants	卖方: 广东聚广恒自动化设备有限公司	It is used as assembly paste and prevents seizing, welding or scaling
	Phenol Alkylation Plant	卖方: Hubei Sanli Fengxiang Technology Co., Ltd	Phenol Alkylation Plant Product Description Alkyl phenolis produced by the alkylation of phenol...
	KYODO YUSHI PAREMAX SUPER 400G High Temperature Grease	卖方: 广东聚广恒自动化设备有限公司	Ball bearing grease. Excellent in low noise property and usable over a wide temperature range.Rar...