4-ADPA 4-Aminodiphenylamine CAS 101-54-2
101-54-2 –Names and Identifiers
| Name | 4-Amino diphenylamine |
| Synonyms | azosaltr Azosalt R C.I. 76085 C.I. 37240 blackbasep Luxan Black R fastbluersalt FastblueRTbase acnablackdfbase Fast Blue R Salt C.I. Developer 15 VARIAMINE BLUE RT Acna Black DF Base 4-amino-diphenylamin p-Aminodiphenylamine 4-Aminodiphenylamine C.I. Oxidation Base 2 4-Amino diphenylamine 4-(Phenylamino)aniline Variamine Blue RT Base Benzenediamine, N-phenyl- N-phenylbenzene-1,4-diamine N-Phenyl-P-Phenylenediamine 4-Benzenediamine,N-phenyl-1 C.I. Azoic Diazo Component 22 N-Phenyl-1,41phenylenediamine |
| CAS | 101-54-2 |
| EINECS | 202-951-9 |
| InChI | InChI=1/C12H12N2/c/h1-10H,13H2 |
101-54-2 –Physico-chemical Properties
| Molecular Formula | C12H12N2 |
| Molar Mass | 184.24 |
| Density | 1.09 |
| Melting Point | 69 °C |
| Boling Point | 354 °C |
| Flash Point | 193°C |
| Water Solubility | Soluble in water at 20°C 0.6g/L. Soluble in (10 mg/mL) ethanol. |
| Solubility | ethanol: soluble10mg/mL, clear, very dark red (Violet to brown to black solution) |
| Vapor Presure | 1 hPa |
| Appearance | Form Liquid, color Clear |
| Color | Clear |
| BRN | 908935 |
| pKa | 5.20±0.10(Predicted) |
| PH | 8.9 (0.5g/l, H2O, 20℃) |
| Storage Condition | Store below +30°C. |
| Stability | Stable. Combustible. Incompatible with strong oxidizing agents, strong acids, plastics. |
| Refractive Index | 1.6266 (estimate) |
| Physical and Chemical Properties | Gray needle crystal. melting point 72 ℃ boiling point 354 ℃ solubility soluble in organic solvents such as ethanol, ether, can also be soluble in acid, alkali solution, slightly soluble in water. |
| Use | Intermediates for dyes and auxiliaries |
101-54-2 –Risk and Safety
| Risk Codes | R22 – Harmful if swallowed R36 – Irritating to the eyes R43 – May cause sensitization by skin contact R42/43 – May cause sensitization by inhalation and skin contact. R36/37/38 – Irritating to eyes, respiratory system and skin. R20/22 – Harmful by inhalation and if swallowed. R50/53 – Very toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment. |
| Safety Description | S26 – In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. S36 – Wear suitable protective clothing. S45 – In case of accident or if you feel unwell, seek medical advice immediately (show the label whenever possible.) S36/37/39 – Wear suitable protective clothing, gloves and eye/face protection. S61 – Avoid release to the environment. Refer to special instructions / safety data sheets. S60 – This material and its container must be disposed of as hazardous waste. S36/37 – Wear suitable protective clothing and gloves. |
| UN IDs | UN3077 |
| WGK Germany | 3 |
| RTECS | ST3150000 |
| FLUKA BRAND F CODES | 8 |
| TSCA | Yes |
| HS Code | 29215990 |
| Hazard Note | Irritant |
| Hazard Class | 9 |
| Packing Group | III |
| Toxicity | LD50 orally in Rabbit: 464 mg/kg LD50 dermal Rabbit > 5000 mg/kg |
101-54-2 –Upstream Downstream Industry
| Raw Materials | 1-Chloro-4-nitrobenzene Aniline 1-Chloro-4-nitrobenzene Formic acid Sodium sulfide Hydrogen Potassium carbonate Nitrobenzene |
| Downstream Products | N-isopropyl-N’-phenyl-p-phenylenediamine N-1,3-dimethylbutyl-N’-phenyl-p-phenylenediamine |
在线联系供应商
Other supplier products
 |
Adhesion promoters STD-7266 | Composition: Special polyester copolymer Appearance: light yellow viscous liquid Active ingredient: 60% Solvent: Mixed dibasic estersApplication... |
 |
2,5-Diaminotoluene sulfate CAS 615-50-9 | 615-50-9 – Names and Identifiers Name 2,5-Diaminotoluene sulfate Synonyms C.I. 76043C.I. Oxidation Base 4P-TOLYLENEDIAMINE SULF... |
 |
Dispersants STD-58685N | Composition: Organic copolymer solution with pigment-friendly groups Appearance: yellow transparent solution Active ingredient: 50% Solvent: Mix... |
 |
Styrene CAS 100-42-5 | Introduction Styrene SDEB is a type of styrene produced by catalytic dehydrogenation of ethylbenzene. It is used to manufacture polystyrene, A... |
 |
Composite materials – epoxy resin adhesive | MT 4003/5112/3042/4512LV series and EP242 series: The characteristics of good toughness, wide applicable temperature, and moderate activation time... |
Same products
 |
Easy-cleaning Silicone-Modified Waterborne UV Resin | 卖方: Guangzhou Human New Material Science and Technology Co., Ltd | LUV533 is a high-performance, silicone-modified hexafunctional waterborne UV resinengineered to d... |
 |
Water-based Soft-Touch Resin for Consumer Electronics | 卖方: Guangzhou Human New Material Science and Technology Co., Ltd | Water-based Soft-Touch Resinis an advanced coating material formulated to deliver a luxurious, ve... |
 |
Conformal Coatings | 卖方: Guangzhou Human New Material Science and Technology Co., Ltd | The conformal coatingsprovide good adhesion to metal, PCB and other substrates after curing at ro... |
 |
Metalized & Laser Transfer coating | 卖方: Guangzhou Human New Material Science and Technology Co., Ltd | Metallized and laser transfer coatingsare designed with sustainability in mind, ensuring minimal ... |
 |
Hydrophilic coatings for Air Conditioner | 卖方: Guangzhou Human New Material Science and Technology Co., Ltd | A water-based coating combination applied on the surface of aluminum foil, which forms a layer wi... |
