Pure polyester/TGIC powder coating
Product description
This series of products uses saturated polyester resin and TGIC curing agent as the main base material to make thermosetting powder coating.
Product characteristics
- Good adhesion, good mechanical properties, tough coating film, meeting high strength requirements;
- Smooth coating film, high gloss;
- Suitable for long-term outdoor exposure product coating, good outdoor durability;
- Excellent over-baking resistance.
Special effects
Various wrinkles, metal, pearlescent effects and mixed colors, etc.
Application areas
Suitable for various long-term outdoor exposure product coating:
1.Household appliances:outdoor units of air conditioners, indoor appliances and lamps with high lighting conditions;
2.Construction industry applications:colorful curtain walls, door and window frames, ceilings with high lighting conditions;
3.Traffic facilities:highway guardrails and grilles; 3. Auto parts, sports facilities, fitness equipment, gas station equipment, and courtyard facilities.
Transport packaging
Carton packaging, lined with two layers of PVC plastic bags, net weight of each box is 20kg. Non-dangerous goods can be transported in various ways, but should be kept away from direct sunlight, moisture and heat, and contact with chemicals.
Hygiene and safety
Operators should wear dust masks during use to avoid inhaling dust, and minimize long-term contact between skin and powder coating. Paint attached to the skin can be washed with soap.
Powder properties
| Specific gravity | 1.4~1.8g/cm” (depending on the formula and color) |
| Particle size | Depending on the purpose, the standard type has an average particle size of 35~40 microns, less than 10 microns powder <10%, greater than 100 microns powder <0.5%. |
| Volatile matter | <1% |
| Softening point | 60~95℃ varies depending on the color gloss |
| Storage stability | Polyester/TGIC powder coatings should be stored in a dry, ventilated room below 35℃, and avoid direct sunlight. If stored in an air-conditioned room, the powder must be stored at room temperature or the same (temperature) as the spraying equipment before use to avoid moisture. Under this condition, the powder can be stably stored for 12 months. If it exceeds the period, it must be re-tested. If the result meets the requirements, it can still be used. Note: For low-temperature curing types and powders with a gloss of less than 40% (60″), the storage temperature should be below 30℃. |
Coating properties
| Test items | Inspection standard or method | Inspection index |
| Appearance | Visual inspection | Various board surface effects |
| Impact | GB/T 1732 | ≥50Kg·cm |
| Bending | GB/T 6742 | ≤2mm |
| Cupping | GB/T 9753 | ≥8mm |
| Hardness | GB/T 6739 | ≥H~2H |
| Adhesion | GB/T 9286 | Level 0 |
| Neutral salt spray resistance | GB/T 1771 | 500h; Scribed area: unidirectional rust ≤2.0mm; Unscribed area: no abnormality |
| Moisture and heat resistance | GB/T 1740 | 500h No abnormality |
| Artificial weather aging resistance | GB/T 1865 | 800h; Discoloration ≤2 level; Gloss loss ≤2 level |
| The above coating performance indicators may decrease slightly as the gloss decreases. | ||
| Spraying | This series of products are suitable for the following spraying methods: corona electrostatic spraying; friction electrostatic spraying; electrostatic fluidized bed spraying; fluidized bed hot dip coating. | |
| Coating thickness: Use between 40~150 microns, recommended film thickness is 50~80 microns. Average coverage: 10~12 square meters/kg, film thickness 60 microns (calculated based on 100% usage rate) | ||
| Curing conditions | 200℃/10 minutes is recommended, and it can also be designed according to user needs: 160C/20 minutes, 180℃/10 minutes, etc. | |
If you're ready to take the next step or Request Free Samples, Leave your message below and we’ll reply soon. 20+ years of chemical manufacturing & export experience, a partner you can trust.
在线联系供应商
Other supplier products
|
|
Plaza powder coating | Characteristics of powder coatings 1. The coating film is flat and smooth; 2. The paint film has good physical and mechanical properties, especia... |
|
|
Metallic plane MT-629/93601 | Introduction No. MT-629/93601 Color Gray Surface Metallic plane System Resin imported from Austria Packing Speci... |
|
|
Electrical Appliance Powder Coating | Aesthetic and Functional Excellence: The coating provides an aesthetically pleasing and uniform finish with excellent weather resistance. The gloss... |
 |
Flat matte MT-03923679 | Introduction No. MT-039/23679 Color Yellow Surface Flat matte System Weather-resistant polyester Scope of applic... |
|
|
High-Temperature Resistant Powder Coating | Product Introduction: High-temperature resistant coatings are typically defined as those whose films do not change color, do not flake off, and ca... |
Same products
 |
Sucralose powder Food additive | 卖方: Shanghai Yifu Food Ingredients Co., Ltd | Sucralose, as a new generation of high-sweetness sweetener, has demonstrated comprehensive and ou... |
 |
Sucralose Purchase price | 卖方: Shanghai Yifu Food Ingredients Co., Ltd | Sucralose, as a high-sweetness, calorie-free, and highly stable artificial sweetener, enjoys wide... |
 |
Sucralose Partners, long-termCooperation | 卖方: Shanghai Yifu Food Ingredients Co., Ltd | Sucralose is currently a widely used high-potency sweetener globally. Its safety has been verifie... |
 |
Sucralose | 卖方: Shanghai Yifu Food Ingredients Co., Ltd | Sucralose is a high-sweetness agent obtained by replacing the hydroxyl groups at positions 4, 1',... |
 |
Sucralose | 卖方: Shanghai Yifu Food Ingredients Co., Ltd | Sucralose is a trichloro derivative of sucrose (4,1',6'-trichloro-4,1',6'-dideoxy-galactosucrose)... |
