Stainless Steel Investment Casting

The stainless steel has much better physical properties then iron and normal steel, but it possesses worse casting properties. Because the stainless steel has higher melting temperature point, by the liquid form it has worse flowability and bigger shrinkage ratio, and more easier to be oxidized. To prevent the happening of defects such as crack, sand stick, under-pounding etc., a series of more complicated technics are applied in the casting, thus the success rate of stainless steel casting Chinais able to greatly be improved.

Features of Stainless Steel Castings

Take higher metal temperature reaches to 1520~1600℃. For the small and complicated structure part keep the pouring temperature to melting point +150℃; for the big and thick wall part keep the pouring temperature to melting point +100℃;

Make bigger and simpler gating tunnel;

Use dry or heated casting mold;

Make sure the casting product wall thickness is as even as possible and over 8mm, optimize the part structure in sharp corners and edges;

Improve air permeability and passing ability by using hollow mold core or oil-sand core, or add coke with it.

Notice of Stainless Steel CastingChina

For the material used to create the mold shell, similar to the iron casting somehow, the china stainless steel castingalso uses silica sol and water glass as the adhesive material.

Other supplier products

	Brass, Bronze, Copper Casting	As defined by its main properties, copper offers excellent electrical and heat conductivity, and good corrosion resistance ability as well. But nat...
	Grey Cast Iron Casting	The name grey iron is because of the gray color of the fracture it forms, which is due to the presence of graphite. Grey iron is the most common an...
	Investment Casting	Investment casting, also called the lost-wax casting process, is actually an ancient metal casting technology with a history of over 6,000 years. I...
	Semi-Solid Die Casting	Based on the theory of stir cast invented by Mr. D.B. Spencer and M.C.Flemings, the semi-solid die casting technic has been further developed and a...
	Low Pressure Die Casting	The low pressure die casting is to let the melted metal flow into the casting mold under a certain degree of pressure, and solidify the casting par...

供应产品

Same products

	Room Temperature Vulcanized Silicone Rubber	卖方: Zhongtian East Fluorine Silicon Material Co., Ltd	Product Name: room temperature vulcanizing silicone（Methyl RTV 107/OH Polymer） Molecular Formu...
	Polydimethylsiloxane	卖方: Zhongtian East Fluorine Silicon Material Co., Ltd	Name: Hydroxy Terminated Polydimethylsiloxane(Methyl Silicone Oil) Melt Point (℃): -59 Spon...
	Octamethylcyclotetrasiloxane (D4)	卖方: Zhongtian East Fluorine Silicon Material Co., Ltd	Product Name: D4 Silicone Octamethylcyclotetrasiloxane Molecular Formula: (CH3 ) 8 Si4 O4 O...
	Mixing Silicone Rubber	卖方: Zhongtian East Fluorine Silicon Material Co., Ltd	Mixing Silicone Rubber Usage: it can be used for pressing buttons, o-ring, sealing gasket, sha...
	Methyl Vinyl Silicone Rubber	卖方: Zhongtian East Fluorine Silicon Material Co., Ltd	Name: Methyl Vinyl Silicone Rubber Feature: High temperature resistant Appearance: ...