.

Grey Cast Iron Casting

The name grey iron is because of the gray color of the fracture it forms, which is due to the presence of graphite. Grey iron die castingis the most common and widely used casting material.

Grey iron is so popular in engineering applications because of its relatively low cost and the properties it presented. The grey iron has good galling and wears resistance because the graphite flakes self lubricates, and it also gives the gray iron part an excellent damping capacity because it absorbs the energy and converts it into heat.

Grey iron is very suitable for casting works. But during the casting process, a less solidification shrinkage than other casting iron shall be considered. The silicon promotes good corrosion resistance and increased fluidity when casting.

Below is a reference chart of other ASTM standards affecting grey iron.

ASTM A395 & ASME SA395: ferritic ductile iron pressure-retaining castings for

use at elevated temperatures

ASTM A439: austenitic ductile iron castings

ASTM A476 & ASME SA476: ductile iron castings for paper mill dryer rolls

ASTM A536 & SAE J434: ductile iron castings

ASTM A571 & ASME SA571: austenitic ductile iron castings for pressure-containing parts suitable for low-temperature service

ASTM A874: ferritic ductile iron castings suitable for low-temperature service

ASTM A897: austempered ductile iron castings

Ductile iron

Description of Gray Cast Iron

Gray cast iron is a type of cast iron. Carbon is present in cast iron in the form of flake graphite. The fracture is gray in color. It has good casting and cutting properties and good wear resistance. Gray cast iron is used in the manufacture of frames, boxes, etc. The graphite of gray cast iron is in the form of flake. The effective bearing area is relatively small, and the graphite tip is easy to produce stress concentration, so the strength, plasticity, and toughness of gray cast iron are lower than other cast iron. However, it has excellent vibration damping, low notch sensitivity, and high wear resistance.

Introduction to Cast Iron Molding

Cast iron moldings are broadly defined as objects cast in iron, which is the most commonly used metal.

Numerical simulation of the solidification process of thick and large section ductile iron castings with the application of computer was carried out for the temperature field. Increasing the strength of the mold shell, baking temperature and decreasing the pouring temperature are beneficial to reduce the scrap rate of castings and improve the quality of ductile iron castings.

Factors Affecting the Performance of Gray Cast Iron

The influence of chemical composition

In production, the quality fraction of carbon and silicon is mainly controlled. If the mass fraction of carbon and silicon is too low, the cast iron is easy to appear white mouth organization, and the mechanical properties and casting performance are very low; if the mass fraction of carbon and silicon is too high, the graphite flakes are too much and coarse, and even the graphite floats on the surface of the iron, which reduces the performance and quality of the castings. Therefore, the carbon and silicon content of gray cast iron is generally controlled at 2% to 4% C; 1.0% to 2.0% Si; 0.5% to 1.4% Mn.

The effect of cooling rate

Under certain casting process conditions, the cooling rate of the casting has a great impact on the degree of graphitization. Castings of different wall thickness with the increase in wall thickness, the cooling rate slows down, and carbon atoms have sufficient diffusion time. It is conducive to the full graphitization process, room temperature organization is easy to form gray iron organization; but thin-walled parts in the cooling process, the cooling rate is too fast, easy to form a white mouth iron organization.

Rayforce Manufacture as one of the most professional iron casting companiesand metal casting companies, we provide metal casting china, cast iron and ductile iron, cast iron ductile ironand etc. Want to know iron casting price per kgor more? Please contact us.



在线联系供应商

至: Shanxi Rayforce Manufacture Co., Ltd.
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

Art & Home Sculptures
Art & Home Sculptures Rayforce's metal casting can be applied to Home accents, casting crafts, home sculpture, umbrella base, table and chair, patio bench, etc. Rayfo...
Semi-Solid Die Casting
Semi-Solid Die Casting Based on the theory of stir cast invented by Mr. D.B. Spencer and M.C.Flemings, the semisolid die castingtechnic has been further developed and app...
Sodium Silicate Sand Casting
Sodium Silicate Sand Casting Sodium silicate is a generic name for chemical compounds with the formula Na2SiO3. This material is generally colorless transparent solids, or in w...
Compressors & Gears
Compressors & Gears Rayforce's metal cast iron gearscan be applied to Turbo blowers, air control component, piston compressors, casting gears, etc. Application of C...
Silica Sol Investment Casting
Silica Sol Investment Casting The silica sol also shares the name of water glass in general. It is used in the metal casting process as mold adhesive which is mixed with sand an...
供应产品

Same products

METAL BRACKETS
METAL BRACKETS 卖方: JCL Precision Part Co.Ltd. Custom metal brackets are some of the strongest supports. JCL precision-engineers them to your cu...
陶瓷型芯注射机
陶瓷型芯注射机 卖方: 秦皇岛埃孚科技有限公司 陶瓷型芯注射机主要用于形状复杂,高品质、高精度铸件的陶瓷型芯的成型。该设备通过吸收国内外先进制造技术和精铸行业的自身特点,研制开发成功。 合模力:35T-100T
压蜡机
压蜡机 卖方: 秦皇岛埃孚科技有限公司 注蜡机用于精密铸造生产中蜡模的制作。合模力最大 :10T-150T
全自动脱蜡釜
全自动脱蜡釜 卖方: 秦皇岛埃孚科技有限公司 脱蜡釜,是精铸生产中的型壳脱蜡专用设备 内腔尺寸: Φ1000×1200mm/ Φ1200×1500mm/ Φ1400×1600mm
CNC TURNING
CNC TURNING 卖方: Baoji Haiqiao Industrial & Trading Co., Ltd. As a CNC turning manufacturerin China, HQ has the capacity to dealing with both small lot and mas...