Dimethyl Lauryl/myristyl Amine CAS 84649-84-3
Introduction
| Chemical Name | Dimethyl Lauryl/myristyl Amine |
| Product Category | Fatty Tertiary Amine |
| CAS No. | 84649-84-3 |
| Content | 98% |
| Packing | 160kg/drum 800kg/IBC |
84649-84-3 – Names and Identifiers
| Name | Amines, C12-14-alkyldimethyl |
| Synonyms | DMA1270 DMA1265 DMA1263 Amines, C12-14-alkyldimethyl |
| CAS | 84649-84-3 |
| EINECS | 283-464-9 |
84649-84-3 – Physico-chemical Properties
| Use | Pyrazole, a derivative of pyrazole, is an important intermediate in medicine and dyes. |
84649-84-3 – Risk and Safety
| UN IDs | 2735 |
| Hazard Class | 8 |
| Packing Group | III |
84649-84-3 – Introduction
Amines, C12-14-alkyldimethyl, also known as C12-14-alkyl dimethyl tertiary amine or C12-14-alkyldimethylamin, is an alkyl dimethyl tertiary amine compound.
Nature:
-Appearance Colorless or light yellow liquid
-has a special amine odor
-has good solubility, soluble in water and organic solvents
-Non-ionic surfactant
-has a good effect on the interfacial tension of water
Use:
-Mainly used as surfactant and emulsifier
-Widely used in detergents, cleaners, softeners, and emulsifiers in industry and agriculture
-Can also be used for metal and plastic treatment agents, paper moisturizers and skin care products
Preparation Method:
Amines, the preparation of C12-14-alkyldimethyl is usually completed by alkylation reaction and nucleophilic substitution reaction. First, octane diolefin or dodecanol is reacted with a methyl tertiary amine to obtain an intermediate alkyl dimethyl tertiary amine. The intermediate is then reacted with tert-butanol hydrochloride to yield the final product Amines, C12-14-alkyldimethyl.
Safety Information:
– Amines, C12-14-alkyldimethyl is a chemical and should be used in accordance with safe operating procedures
-Avoid skin contact and inhalation of gas or mist when in contact
-Prolonged or heavy exposure may cause skin and eye irritation
-Should be stored in a cool, dry place, away from fire and oxidizing agents
-Wear protective glasses and gloves during use, and maintain good ventilation
在线联系供应商
Other supplier products
 |
Three proof adhesive | Three proof adhesive,also known as circuit board protective adhesive or coating adhesive, is applied to the surface of the circuit board to form a ... |
 |
Styrene CAS 100-42-5 | Introduction Styrene SDEB is a type of styrene produced by catalytic dehydrogenation of ethylbenzene. It is used to manufacture polystyrene, A... |
 |
6PPD (4020) CAS 793-24-8 | 793-24-8 –Names and Identifiers Name N-1,3-dimethylbutyl-N’-phenyl-p-phenylenediamine Synonyms BHTOX-4020Flexzone 7FVulka... |
 |
UV Light Curing Adhesive | Introduction UV curable adhesive is a structural bonding adhesive that solidifies by irradiating UV light. The characteristic of UV curable adhes... |
 |
Epoxy resin adhesive | Epoxy Resin Adhesives: Properties and Applications Table 1: Key Properties of Epoxy Resin Adhesives PropertyTypical ValueSignificance ... |
Same products
 |
Epoxy/Polyester Powder Coatings | 卖方: Standard International Group (HK) Limited | Feature: -Good bond ability and mechanical performance -Smooth and glossy -Certified chemical ... |
 |
Polyester Clear Powder Coatings | 卖方: Standard International Group (HK) Limited | This series of product are made of polyester resin (as hardener) and highly transparentmaterials.... |
 |
Acrylic Clear Powder Coatings | 卖方: Standard International Group (HK) Limited | Feature: -Excellent exterior exposure durability -Excellent durable high gloss -Excellent clar... |
 |
Polyurethane Powder Coatings | 卖方: Standard International Group (HK) Limited | Feature： -Excellent exterior exposure durability -Good flowing -Excellent chemical resistance ... |
 |
MDF Powder Coating | 卖方: Standard International Group (HK) Limited | Feature： -Environmental friendly -No solvents and volatile organic compounds involved which are... |
