QSFP28 100G CWDM4 10KM

QSFP28 100G CWDM4 10KM

The QSFP28 100G-CWDM4-10km module is a highly integrated 4x28G transceiver focused on reach, bandwidth, density and cost for high port-count 100G systems, and client-side 100G interfaces. It is compliant with the 100G 4WDM-10 MSA, which is based on the CWDM4 MSA version 1.1 but alters some of the specifications to extend the link reach from 2 km to 10 km. It is interoperable with CWDM4 transceivers over a 2 km reach.

Features of QSFP28 100G CWDM4 10km

Reach: 10 km via SMF

Optical link budget: Supports 6.5 dB of link budget

Link budget assumes the use of KR4 FEC by the host

Uncooled CWDM DFB lasers, directly modulated

Electrical interface: retimed CAUI-4 per 100G Ethernet IEEE 802.3bm Annex 83E

User controllable Transmit Input Equalization and Receiver Output Amplitud

MSA-compliant performance monitoring via I2C interface

Fiber connector: SMF LC duplex connector

Hot-pluggable

0–70°C operating temp

Power dissipation < 3.5W

RoHS6 compliant (lead-free)

Applications of QSFP28 100G CWDM4 10km

100G CWDM4 Ethernet

InfiniBand 4x EDR

Specifications of QSFP28 100G CWDM4 10km

Optical Transmitter PerformanceOptical Receiver PerformanceRecommended Operating Environment

Parameter		Symbol	Min	Typical	Max	Unit
Center Wavelength	Ch0	λ0		-		nm
	Ch1	λ1		-		nm
	Ch2	λ2		-		nm
	Ch3	λ3		-		nm
Bit Rate per Channel		B				Gb/s
Side Mode Suppression Ratio		SMSR	30	-	-	dB
Average launch power, each lane		-	-6.5	-		dBm
Optical Modulation Amplitude (each lane)		OMA	-4.0	-		dBm
Launch power in OMA minus TDP, each lane		OMA-TDP	-5.0	-		dBm
Transmission & dispersion penalty, each lane		TDP	-	-		dB
RIN20 OMA		-	-	-	-130	dB/Hz
Transmitter Reflectance		-	-	-	-20	dB
Extinction Ratio		ER		-		dB
Transmitter eye mask definition {X1, X2, X3, Y1, Y2, Y3}		{0.31, 0.4, 0.45, 0.34, 0.38, 0.4} 100G 4WDM-10 MSA Technical Specifications Release 1.0
Average launch power of OFF transmitter, each lane		-	-	-	-30	dBm
Optical return loss tolerance		-	-	-	20	dB

Pin Descriptions of QSFP28 100G CWDM4 10km

Pin Definition of QSFP28 100G CWDM4 10km

Pin	Symbol	Name/Description
1	GND	Ground
2	Tx2n	Transmitter Inverted Data Input
3	Tx2p	Transmitter Non-Inverted Data Input
4	GND	Ground
5	Tx4n	Transmitter Inverted Data Input
6	Tx4p	Transmitter Non-Inverted Data Input
7	GND	Ground
8	ModSelL	Module Select
9	ResetL	Module Reset
10	Vcc Rx	+3.3 V Power supply receiver
11	SCL	2-wire serial interface clock
12	SDA	2-wire serial interface data
13	GND	Ground
14	Rx3p	Receiver Non-Inverted Data Output
15	Rx3n	Receiver Inverted Data Output
16	GND	Ground
17	Rx1p	Receiver Non-Inverted Data Output
18	Rx1n	Receiver Inverted Data Output
19	GND	Ground
20	GND	Ground
21	Rx2n	Receiver Inverted Data Output
22	Rx2p	Receiver Non-Inverted Data Output
23	GND	Ground
24	Rx4n	Receiver Inverted Data Output
25	Rx4p	Receiver Non-Inverted Data Output
26	GND	Ground
27	ModPrsL	Module Present
28	IntL	Interrupt
29	Vcc Tx	+3.3 V Power supply transmitter
30	Vcc1	+3.3 V Power Supply
31	LPMode	Low Power Mode
32	GND	Ground
33	Tx3p	Transmitter Non-Inverted Data Input
34	Tx3n	Transmitter Inverted Data Input
35	GND	Ground
36	Tx1p	Transmitter Non-Inverted Data Input
37	Tx1n	Transmitter Inverted Data Input
38	GND	Ground

Important Notice of QSFP28 100G CWDM4 10km

Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by T&S before they become applicable to any particular order or contract. In accordance with the T&S policy of continuous improvement specifications may change without notice.

The publication of information in this data sheet does not imply freedom from patent or other protective rights of T&S or others. Further details are available from any T&S sales representative.

T&S Communicationsis a professional fiber optic products supplier, we provide plc splitter 1x32, 1x16 plc splitter, qsfp 100and etc. Want to know more? Please contact us.

Other supplier products

	10G SFP+ DAC	SFP+ Direct Attach Cables are compliant with the SFF-8431, SFF-8432 and SFF-8472 specifications. Various choices of wire gauge are available from 3...
	MTP®/MPO LOOPBACK Adapter	T & S MTP® / MPO fiber loop is a device used for parallel connection tests and an aging test of optical communication equipment. Well-desig...
	100G QSFP28 BREAKOUT AOC	T&S Communication TSQSS-851HG-xxxC is a Four-Channel, Pluggable, Parallel, Fiber-Optic qsfp28 patch cordSR4 for 100G Ethernet applications. Thi...
	TELECOM AND FTTX NETWORKS	Telecom and FTTx Networks Fiber optical network in recent years tried hard to meet users' eager demands for even larger volume and much higher spe...
	AOC / DAC / TRANSCEIVER	Along with passive optical components, active optical components are indispensable elements of an optical network. T&S Communications adopts un...

供应产品

Same products

	Ball Lensed Fiber	卖方: SHENZHEN PHOTONSTREAM LIMITED	Ball lensed fiber is an optical fiber with a spherical lens at one end. It improves light couplin...
	Angle Polished Lensed Fiber	卖方: SHENZHEN PHOTONSTREAM LIMITED	The Angle Polished Fiber Tip refers to the angled end of an optical fiber that has been carefully...
	976nm 350W Fiber Coupled Laser Diode	卖方: SHENZHEN PHOTONSTREAM LIMITED	976nm 350W Multi-emitter Package Fiber Coupled Laser Diode is a high-power laser module designed ...
	940nm Fiber Coupled Laser Diode	卖方: SHENZHEN PHOTONSTREAM LIMITED	940nm Fiber Coupled Laser Diode is a high-quality laser module that emits an infrared laser beam ...
	940nm Band Pass Filter Optical Fiber	卖方: SHENZHEN PHOTONSTREAM LIMITED	940nm Band Pass Filter Optical Fiber selectively transmits light with a wavelength of 940nm while...