Automated Geosynthetic Interface Friction Testing Equipment
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Standard
Direct shear test:
IS0 12957.1:Geosynthetics - Determination of friction characteristics - Part 1: Direct shear test
GB/T 17635.1-1998:Geotextiles and geotextile-related products - Determination of friction characteristics - Part 1: Direct shear test
JTG E50 T1129:Test method for direct shear friction of geosynthetics in highway engineering (corresponding to JTG E50 T1129)
SL/T 235:Specification for test and measurement of geosynthetics
ASTMD 5321:Standard Test Method for Determining the Coefficient of Soil and Geosynthetic or Geosynthetic and Geosynthetic Friction by the Direct Shear Method
Pull test :
JTG E50 T1130:Test method for pull-out resistance of geosynthetics in highway engineering (corresponding to JTG E50 T1130)
Features:
Direct shear drawing test system is an integrated machine with two functions of direct cutting and drawing, as long as by changing a small amount of tooling fixtures, two test functions can be achieved:
Computer upper computer software controls the test process, direct shear and drawing interface friction integration into one, software autonomy is strong, can independently set the experimental conditions of mainstream standards at home and abroad, applicable to mainstream national standards, and can independently complete data processing, to achieve full data export, easy to study the relationship between shear stress and displacement of samples and time, is a comprehensive interface friction test system;
The horizontal loading device adopts servo electric cylinder to realize full digital speed closed-loop control, which has the advantages of stable speed, wide speed range and high positioning accuracy, and the stretching speed can be set arbitrarily.
The normal loading device is realized by manual hydraulic or automatic electric cylinder, which is convenient and reliable, and the pressure is stable. The pin connection technology can quickly and simply change the clamp required for testing;
It has a variety of hardware and software protection measures such as overload and over-travel to ensure the safe and reliable operation of the equipment.
Parameters
| Description | Details |
|---|---|
| Shear box sizes | 300 x 300 x 200mm; 600 x 600 x 300mm; 600 x 600 x 300mm Under the shear box: 300 x 300 x 200mm; 800 x 600 x 300mm; 800 x 600 x 300mm |
| Drawing box sizes | 300 x 300 x 340mm; 600 x 400 x 500mm; 600 x 400 x 500mm |
| Loading mode | Servo cylinder loading; Hydraulic loading; Hydraulic loading |
| Normal pressure | 0 - 250kPa; 50 - 300kPa (customizable) |
| Static load | 50 - 400kPa |
| Dynamic load | 50 - 300kPa |
| Horizontal drive mode | Servo cylinder; Servo motor; Hydraulic drive |
| Maximum horizontal force | 30kN; 50kN; 100kN |
| Horizontal load accuracy | 0.50% |
| Straight shear drawing speed | 0.1 - 10mm/min; 0.1 - 10mm/min; 0.3 - 10mm/min |
| Direct shear displacement | 0 - 100mm |
| Drawing displacement | 0 - 150mm |
| Displacement resolution | 0.01mm |
| Return speed | 1 - 50mm/min |
| Power supply | AC220V 50Hz |
| Overall dimensions | 2400 * 700 * 2000mm; 2900 * 850 * 3400mm; 1500 * 900 * 1800mm |
Accessoriess
Shear box
Vertical loading device
Horizontal loading device
Tensile and compressive force sensor
Displacement sensor, etc.
Test Procedures
Ensure the test requirements are met; then, the geosynthetic material sample is placed flat on the soil sample or embedded in the soil in the prescribed manner, and its position is secured.
Set the test parameters: According to the test standards and requirements, set parameters such as direct shear or pull-out speed, vertical pressure, and data acquisition frequency in the control system.
Conduct the test: Start the testing machine. The loading system applies vertical pressure and horizontal force according to the set parameters. Sensors collect force and displacement data in real time. The control system processes and displays the data. During the test, observe the test phenomena, such as the deformation and failure of the sample.
Test completion and data processing: When the test termination conditions are met, stop the test and turn off the power; export the test data from the control system, organize and analyze the data according to relevant standard methods, and calculate the performance indicators of the geosynthetic material, such as direct shear friction coefficient, shear strength, and pull-out resistance.
在线联系供应商
Other supplier products
 |
Fire Retardant Coating Tester, Large Plate Method Fire Tester, ASTM E119 & ISO 834 | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com E-mail：info@standard-groups。com Features 1. The degree of automation is hig... |
 |
Electric pencil hardness tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Electric Pencil Hardness Tester is designed to determine the surface hardness of coatin... |
 |
ISO 105 Colorfastness to Rubbing Test Machine for Leather and Textile | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Features and Advantages Three Independent Stations: Allows simultaneous test... |
 |
Friction Sensation Tester STD-SE，ASTM D1894 emotional touch friction tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Friction Tester is designed to evaluate the tactile performance of fabrics and other ma... |
 |
Industrial Linear Reciprocating Friction and Wear Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards GB/T 3960-2016 Plastics – Determination of Sliding Wear Properties GB/T 1... |
Same products
 |
Astm A519 1020 Seamless Alloy Steel Pipe | 卖方: HEBEI TIRICO PIPELINE CO.,LTD | Astm A519 1020 Seamless Alloy Steel Pipe Size : OD: 10.3-323.9mm, WT: 1.65-40mm, Length: 0... |
 |
Reshaping Service | 卖方: Dongguan Yuhui Die Casting Co., Ltd | Reshaping Service Reshapingin the die casting industry typically refers to the process of adjust... |
 |
CNC Machining Services | 卖方: Dongguan Yuhui Die Casting Co., Ltd | CNC Machining Services CNC (Computer Numerical Control) Machiningis a manufacturing process in w... |
 |
Mold Manufacturing | 卖方: Dongguan Yuhui Die Casting Co., Ltd | Mold Manufacturing Mold manufacturingis the core of the die-casting process, involving the trans... |
 |
榆木预制板 | 卖方: 浙江合永家居智造股份有限公司 | 隆重推出——完美融合自然之美与现代工艺。这些木板采用实木打造，经钢丝拉丝处理，展现榆木丰富自然的纹理，同时兼具卓越的耐用性和精致现代的饰面效果。是墙面、天花板或定制设... |
