4 Section Boom Concrete Pump
Compared with two-section boom and three-section boom, four-section arms have more combination of folding modes. Commonly used in construction are m-shaped, RZ-shaped R-shaped, Z-shaped and so on. RZ, a combination of two basic modes, which have both advantages of R ad Z, are widely used.
A lot of people don't know how to choose the concrete pump types. Actually, it is not difficult. You can choose the suitable model correctly, as long as you consider the concrete project object, the characteristic, the required quantity of conveyance, the conveyance distance, the concrete construction plan and the concrete pump form.
The performance of the concrete pump truck varies with the type of the truck. When selecting the machine type, the type and structure of the building, construction technical requirements, site conditions and surrounding environment should also be considered besides the amount of concrete pouring. The main performance parameters of the selected concrete pumping equipment suppliesshould be consistent with or slightly larger than the construction needs. If the capacity is too large, the utilization rate is low. If the pump truck is too small, it will not only fail to meet the construction requirements but also accelerate the loss of the concrete pump truck.
The concrete pump truck has flexibility. The higher the boom height, the larger the casting height and the placing radius and the stronger the construction adaptability. Therefore, high - arm concrete pump truck should be selected as far as possible in construction. The concrete pump truck with arms length of 28 -- 36m is a mass product on the market, accounting for about 75%. Long - arm concrete pump truck will be the main type of construction. In addition, as the concrete pump truck is limited by the bearing capacity of the car chassis, the cost increases greatly when the boom height exceeds 42m. Limited by the construction site space, it is rarely used.
The number of concrete pump trucks used can be calculated according to the amount of concrete pouring, the actual amount of conveyance per machine and the construction time. For those one-time concrete pouring a large amount of concrete pump construction projects, there must be a certain amount of reserve. In addition, the concrete mixing station with an annual output of 10 -- 150,000 m3 needs to be equipped with 2 -- 3 concrete pump trucks.
People should insist on high quality when choosing concrete pump. If high value concrete pump truck is selected, the standard of its products must be improved. The quality of the main components of the product, from internal quality to external quality, should be adapted to the high value of the whole vehicle.
The concrete pump truck adopts full hydraulic technology. So it is necessary to consider whether the hydraulic technology used is advanced or not. Therefore, in addition to the performance and quality of the engine, the performance, bearing capacity and quality of the automobile chassis should also be considered.
The operation control system on the concrete pump truck is provided with manual, wired and wireless control modes, which are convenient and flexible. Wireless remote control can be operated remotely. Once the circuit fails, manual operation mode can be adopted.
As a special vehicle, the concrete pump truck should be required for its safety, mechanical performance, after-sale service and parts supply. Otherwise, once the accident occurs, it not only affects the construction schedule, but also will produce the unimaginable consequence.
在线联系供应商
Other supplier products
 |
Refurbished Concrete Mixer Truck | Remanufacturing is the process of revitalizing old machinery and equipment. It takes old machine equipment as blank, adopts special craft and techn... |
 |
36m Concrete Pump Truck | The 36-meter concrete pump truck is an excellent medium and short arm pump truck, which is made after HBT towing pump, HBC on-board pump and HGY hy... |
 |
52m Concrete Pump Truck | Machine performance of 52 meter concrete pump The concrete pump chassis of zoomlion ZLJ5430THBB 52x-6rz adopts noble German Benz chassis. Intellige... |
 |
46m Concrete Pump Truck | The 46-meter concrete pump, also known as the small orthopaedic concretepumping, is always used in the construction of floor heating. It can be use... |
|
|
Used Concrete Boom Pump | It is a common fact that we find a wide variety of concrete machines on every construction sites, which make the construction jobs easy, safe and q... |
Same products
 |
HZJ-0.5混凝土振实台 | 卖方: 浙江路达机械仪器有限公司 | 该产品适用于实验室现场工地作为试件成型和预制构件厂振实各种板、柱梁等混凝土构件振实成型。 主要技术参数及其规格： 台面尺寸mm ：500×500 振动频率次/分：2860 振动幅度... |
 |
BYS-20标准养护恒温恒湿控制仪（喷淋） | 卖方: 浙江路达机械仪器有限公司 | 本产品适用于各实验室做大批量混凝土、水泥制品等试件的养护，集制冷、加热、加湿于一体，产品符合GBJ204-83、GBJ177-85及（ISO）GB/T17671。 特点：采用高精度最新的单片机控... |
 |
LDCL-B氯离子快速含量分析仪 | 卖方: 浙江路达机械仪器有限公司 | 本产品通过配备的专业软件及化学抗干扰试剂在室温下快速测定混凝土、砂石子、水泥、拌合水等无机材料的水溶性氯离子含量。 该产品符合标准如下： GB/T 50476-2008 《混凝土结构耐久性设... |
 |
TDRF-1 混凝土快速冻融箱 | 卖方: 浙江路达机械仪器有限公司 | 我公司为TDRF型混凝土快速冻融箱（装置）建材部标准起草单位，参与国家建材院《混凝土抗冻试验设备》标准制订。 本产品适用于对混凝土、建筑砖块、陶瓷砖及其它建材类材料进行冻融试验，产品符合DL/T... |
 |
ZH-DG.80型磁盘振动台 | 卖方: 浙江路达机械仪器有限公司 | 该仪器使用广泛，应用于监工、建材及科研单位，对混凝土试块或其他物料振实之用。 符合JG/T3020-94《混凝土试验用振动台》建工行业标准的技术要求。 主要技术参数及其规格： 外形尺寸mm... |
