Refurbished Concrete Mixer Truck
Remanufacturing is the process of revitalizing old machinery and equipment. It takes old machine equipment as blank, adopts special craft and technology, a new manufacture is carried out on the basis of the original manufacturer, and the remanufactured products are as good as the original ones in both performance and quality.
Refurbished Mixer Truck Products (remanufactured):
Scientifically speaking, remanufacturing is an industry that carries out high technology repair and transformation on waste products, and it targets the parts that are damaged or will be scrapped, based on the analysis of performance failure and life evaluation, the design of remanufacturing engineering is carried out, adopt a series of related advanced manufacturing technology to make the quality of remanufactured cement concrete mixer truck meet or exceed the new cement mixer lorry.
The process of remanufacturing the mixer truck used of Hunan Teila Heavy Industry Machinery Service Co., Ltd is below: Check and maintain the engine properly, gearbox maintenance ensure there is no noise when putting into gear. Maintenance inspection for the middle and rear axle. Reducer inspection and maintenance and checking no oil leakage point on the main oil pump. Check clutch, main pump, booster pump, clutch plate, and braking system thoroughly. Inspection for brake master cylinder, brake cylinder, brake pad. Clean up the oil lines and diesel tank to replace the filter. Light check and line arrangement make sure all the lights are on. Air pressure and air circuit system check to ensure no air leakage. Air conditioner maintenance. Internal appearance trimming, the cement of mixer tank is cleaned. Inlet and outlet, Herringbone slot, stairs on both sides repair welding. Roller track bearing inspection without abnormal noise. Control rod wiredrawing replacement repair. The vehicle tire, changing the vehicle and beat the butter and cab beauty.
Old cement mixer for sale! Old concrete mixer for sale! RFQ today!
在线联系供应商
Other supplier products
 |
36m Concrete Pump Truck | The equipt concreteis an excellent medium and short arm pump truck, which is made after HBT towing pump, HBC on-board pump and HGY hydraulic concre... |
 |
46m Concrete Pump Truck | The 46-meter concrete pump, also known as the small orthopaedic concretepumping, is always used in the construction of floor heating. It can be use... |
 |
Concrete pump Since Hunan Teila Heavy Ind | Since Hunan Teila Heavy Industry Machinery Service Co., Ltd. was established, Teila is always committed to concrete pumps. Our main products includ... |
 |
56m Concrete Pump Truck | The comprehensive energy consumption of the pumping hydraulic system of the upgraded 56 meter concrete pumptruck decreased by 4% year on year. Pump... |
 |
49m Concrete Pimp Truck | The 49-meter advanced concrete pumpingis a kind of common construction vehicle, which is internationally advanced in key performances such as pumpi... |
Same products
 |
HZJ-0.5混凝土振实台 | 卖方: 浙江路达机械仪器有限公司 | 该产品适用于实验室现场工地作为试件成型和预制构件厂振实各种板、柱梁等混凝土构件振实成型。 主要技术参数及其规格： 台面尺寸mm ：500×500 振动频率次/分：2860 振动幅度... |
 |
BYS-20标准养护恒温恒湿控制仪（喷淋） | 卖方: 浙江路达机械仪器有限公司 | 本产品适用于各实验室做大批量混凝土、水泥制品等试件的养护，集制冷、加热、加湿于一体，产品符合GBJ204-83、GBJ177-85及（ISO）GB/T17671。 特点：采用高精度最新的单片机控... |
 |
LDCL-B氯离子快速含量分析仪 | 卖方: 浙江路达机械仪器有限公司 | 本产品通过配备的专业软件及化学抗干扰试剂在室温下快速测定混凝土、砂石子、水泥、拌合水等无机材料的水溶性氯离子含量。 该产品符合标准如下： GB/T 50476-2008 《混凝土结构耐久性设... |
 |
TDRF-1 混凝土快速冻融箱 | 卖方: 浙江路达机械仪器有限公司 | 我公司为TDRF型混凝土快速冻融箱（装置）建材部标准起草单位，参与国家建材院《混凝土抗冻试验设备》标准制订。 本产品适用于对混凝土、建筑砖块、陶瓷砖及其它建材类材料进行冻融试验，产品符合DL/T... |
 |
ZH-DG.80型磁盘振动台 | 卖方: 浙江路达机械仪器有限公司 | 该仪器使用广泛，应用于监工、建材及科研单位，对混凝土试块或其他物料振实之用。 符合JG/T3020-94《混凝土试验用振动台》建工行业标准的技术要求。 主要技术参数及其规格： 外形尺寸mm... |
