Indoor Aluminum Composite Panel Installation Method
Aluminum composite panel installation - on the Metope plywood
For the uneven and blank wall, you need to choose the aluminum composite panel ranging from 2 to 3mm. ,
Step 1: Use 9MM splint to make the whole wall;
Step 2: Cut the aluminum composite panel according to product size and collage pattern.
Step 3: Spray the universal glue evenly on the back of the wooden board and the aluminum composite panel with the spray gun;
Step 4: glue the aluminum composite panel one by one on the wooden board base according to the arrangement of the pattern.
Step 5: Use glass glue and aluminum trim strip to convergent edges;
Step 6: Remove protective film after adhesive bonding.
Aluminum composite panel installation - on the cement wall
For the relatively flat concrete wall or the original wall that has been done flat treatment, you need to choose aluminum composite panel ranging from 2 to 3mm thickness.
Step 1: Measure the wall dimensions, then make the aluminum composite panel according to the design drawing.
Step 2: Arrange the aluminum composite panel on the wall.
Step 3: Trim the edges of the aluminum composite panel with trimming knife, and be careful not to wear aluminum.
Step 4: Tighten the aluminum panel and aluminum alloy with the pull-down screw.
Step 5: Seal the edge with stainless steel or aluminum alloy.
Note: The aluminum composite panel can also be glued to the wall with structural glue or nailing glue, and decorated with decorative side strips.
Know the installation method, how about choosing a fashionable aluminum composite panel? Jinxiang - a professional aluminum composite panel supplier is able to meet all your needs. We offer you OEM aluminum composite panel Service which will give you a different color decorative board.
Click to view more details about aluminium composite panel installation details
在线联系供应商
Other supplier products
 |
Outdoor Aluminum Composite Panel Installation | Aluminum composite panel installation attentions:1. The variety, quality, color, pattern and line of the aluminum composite panel should meet the... |
 |
ACP Curtain Wall | The Main Performance Of The Aluminium Plastic Composite Panel For Building Curtain Wall: Compared with ceramic, glass and other materials, the a... |
 |
PVDF Aluminum Composite Panel | PVDF Aluminum Composite Panel The aluminum composite panel is a new type of material that has been surface-treated and coated with an aluminum pl... |
 |
PE Aluminum Composite Panel | PE aluminum composite panel is generally used for interior wall decoration.Polyester paint (PE): >0.016mm measured with a film thickness meter a... |
 |
ACP Printing | The surface of the aluminum plastic composite panel can be designed into all kinds of colors. It can also be designed into different patterns for a... |
Same products
 |
Antimicrobial Lacquered Aluminum Foil for Insulation | 卖方: HIGH TECH VIP | Anti-microbial lacquered aluminum foilis specially developed for some buildings with high air qua... |
 |
PUR PIR Sandwich Panel | 卖方: HIGH TECH VIP | PUR PIRSandwich boardsfor the construction industry are divided into a variety of insulating mate... |
 |
Fumed Silica Vacuum Insulation Panels (VIP) | 卖方: HIGH TECH VIP | Fumed Silica Vacuum Insulation Panels (VIP)are high-performance thermal insulation materials prim... |
 |
Epoxy Coated Aluminium Coil Supplier | 卖方: LITONG ALUMINUM INDUSTRY (Wuxi) CO., LTD. | Epoxy Coated Aluminium Coil Supplier Epoxy coated Aluminium Coil is an aluminum substrate u... |
 |
embossed aluminium coil | 卖方: LITONG ALUMINUM INDUSTRY (Wuxi) CO., LTD. | embossed aluminium coil Embossed Aluminum Coil is an aluminum sheet or coil with a pattern ... |
