CA6NM stainless steel pipe
Our company website:
Compare CA6NM and 17-4 ph. CA6NM stainless steel pipehas higher strength, hardness, resistance to cavitation erosion, also keep good toughness and fatigue resistance, underwater and has better weldability
Not only CA6NM stainless steel has good corrosion resistance, weldability, but also has high strength and low temperature toughness.
The casting of CA6NMstainless steel has many advantages inapplication Its advantages are as follows： 1.High strength and high toughness Rp0.2 > 600 MPa Rm > 800MPa A > 18% Z > 50% A kv > 100 j. 2 Good low temperature impact properties, fracture toughness and FATT (Brittle transition temperatureof -173 ~ -196 ℃). 3 Good welding yao casting and machining performance. 4 Good underwater fatigue resistance and cavitation erosion and wear resistance. 5 High harden ability and good mechanical properties, with heavy section. 6 CA6NMstainless steel castings good engineering nondestructive testing performance.
But CA6NMstainless steel has its prominent shortcomings and engineering practice. Must solve the key technical problems of its shortcomings as follows,
- 2.Heat treatment process control and the sensitivity of the mechanical properties change.
Through the optimization process. We produce CA6NMtube, meetingwith ASTM A743 and Astm487, and exported to Quebec, Canada.The microstructure of 100% martensite.
在线联系供应商
Other supplier products
 |
Radiant tube | Our company website: What is steel sleeve？ Steel sleeve is also called steel joint. A connector for connecting reinforcement and having an intern... |
|
|
CA6NM stainless steel pipe | Our company website: Compare CA6NM and 17-4 ph. CA6NM stainless steel pipehas higher strength, hardness, resistance to cavitation erosion, also k... |
 |
Sink Roll | Our company website: The roller can be applied in not only metallurgy industry but other appliance. 1. Furnace roller 2. Hearth roll 3. Sink rol... |
 |
CA6NM ASTM A743 A743M | Our company website: CA6NM ASTM A743 A743M CA6NM A743 A743M A487 Grade（UNS）：CA6NM (J91540) Type：12 Chromium,4 Nickel CA6NM Chemical Requirements:... |
 |
Rubber plastic roller | Our company website: Plastic roller is mainly used for crushing, calendering, shaping and other processing of plastic. The outer layer of rubber ... |
Same products
 |
API 5CT L80 1CR/3CR/9CR/13CR NUE/EUE copper plated coupling | 卖方: Tianjin Wenxin Energy Technology Co.,LTD | Introduction NUE Thread Couplings are short lengths of pipe used to connect 2 joints of tubing.T... |
 |
L80 3CR/9CR/13CR 3-1/2 NUE/EUE 4FT Pup Joint | 卖方: Tianjin Wenxin Energy Technology Co.,LTD | Introduction Tubing Pup Joint is a pipe used to transport oil.Tubing pup joint is shorter than t... |
 |
Pup Joint 2-7/8"NUE N80 2FT Blast Joint | 卖方: Tianjin Wenxin Energy Technology Co.,LTD | Introduction Tubing Pup Joint is a pipe used to transport oil.Tubing pup joint is shorter than t... |
 |
NC50 PIN 4145H XT39 BOX Crossover | 卖方: Tianjin Wenxin Energy Technology Co.,LTD | IntroductionCrossover is a tubing or casing for connecting two different sizes, threads and weigh... |
 |
API 5CT 2-7/8"NUE N80 Tubing Coupling | 卖方: Tianjin Wenxin Energy Technology Co.,LTD | Introduction NUE Thread Couplings are short lengths of pipe used to connect 2 joints of tubing.T... |
