Computer Control Hydraulic Universal Testing Machine
Brief Introduction:
WAW-1000C Hydraulic Universal Testing Machine With Tensile Compression Test is adopting oil hydraulic power to push the piston in the oil cylinder to provide loading force. Therefore it is very suitable for making test to different metal and nonmetal materials under high toughness and hardness against extreme big loading force. By using oil pressure transducer and photoelectric encoder, the computer is timely collecting the testing parameter like loading force, stroke etc. The servo system will provide on line close loop control and constant parameters control. The test software is able to create customized testing methods and setup testing report in only a few steps. WAW series is widely used in different inspection department, engineering area, universities and institutes.
Load Frame:
The oil cylinder is at the bottom of the load frame. Tension space is at the upside and compression & bending spaces are between lower crosshead and working table. It is adopting oil hydraulic power to push the piston in the oil cylinder to provide loading force. The lower crosshead is driven by motor through decelerator, chain transmission device and screw pair to realize the adjustment of testing space.
Standards:ISO75001, ASTM A370, ASTM E4, ASTM E8, BSEN, EN10002-2, ISO6892, BS4449:1998 and other international standards.
Technical Parameter:
|
Specification
|
WAW-1000C
|
||
|
Max. capacity (KN)
|
1000
|
||
|
Relative error of reading
|
≤±1%
|
||
|
Clamping method
|
Clamping method
|
||
|
Round specimen clamping range(mm):
|
Φ13~Φ26 Φ26~Φ40 Φ40~Φ60
|
||
|
lat specimen clamping thickness(mm):
|
0-40
|
||
|
Flat specimen clamping width(mm):
|
110
|
||
|
Max. tension test space (mm)
|
620
|
||
|
Max. compression test space (mm)
|
620
|
||
|
Cabinet dimension(mm)
|
1140*780*940
|
||
|
Frame dimension(mm)
|
900*730*2290
|
||
|
Weight
|
Approx.3500kgs
|
||
|
Column net distance (mm)
|
580
|
||
|
Power supply (KW)
|
380V 50HZ
|
||
|
Safety devices
|
Software and machinery protection
|
||
|
Span of bending roller (mm)
|
400
|
||
|
Width of bending roller (mm)
|
140
|
||
|
Diameter of bending roller (mm)
|
Φ40
|
||
|
Compression platen size (mm)
|
200*200
|
||
|
Max. piston stroke (mm)
|
250
|
||
|
Piston max. speed (mm/min)
|
80
|
在线联系供应商
Other supplier products
|
|
Computer Control Hydraulic Universal Testing Machine | WAW-1000C Hydraulic Universal Testing Machine With Worm Gears Used For Steel Pipe Tensile Strength Testing Machine Brief Introduction:WAW-1000C H... |
 |
Bow spring centralizers testing machine | Краткая информация Центраторы испытательная машина недавно развития электронный универсальный материал тестирование машины, которая Приводот винта ... |
 |
弓形弹簧套管扶正器试验机 | 弓形弹簧套管扶正器试验机 用于测量弓形弹簧套管扶正器 起动力，下放力，复位力试验。 最大试验力：100KN 支架：V 型支架 一．简单介绍 扶正器试验机是运用最新的先进专利技术开发的新一代滚珠丝杠驱动电子式压力材料试验机。 本系列试验机采用伺服电动系统，横梁加载，配以适当辅具，可用于金属、非金... |
 |
Bow spring centralizers testing machine | Краткая информация Центраторы испытательная машина недавно развития электронный универсальный материал тестирование машины, которая Приводот винта ... |
 |
弓形弹簧套管扶正器试验机 |
