Hydraulic Power Universal Testing Machine Tensile ,Compression Testing Machine
WAW-C Computer control servo hydraulic universal testing machine adopts under fuel tank host structure. Mainly used for metal and nonmetal material product tensile, compression and bending mechanical test.
If this series testing machine equipped with environment device also can do test with this environment. For example: high temperature tensile testing machine, low temperature tensile and compression testing machine.
It is widely used for the industry of iron, steel, metallurgy and building materials also inspection center, roads and bridges,research institutes, universities and other department.
Main technical specifications:
1> Host:
The host adopts under fuel tank host structure. The tensile space is on the upper of the host. The compression and bending test space is between the lower crosshead and test table. Testing machine photo as follows:
2> Transmission system:
Using the oil pressure transduce to measure the force indirectly. The worm gear transmission device system to adjust the test space. It do not need the screw rotating when you adjust the test space. This made the transmission system and the positioning system separated completely. To ensure the concentricity and durability of the upper and lower jaws.
3> Hydraulic system:
Hydraulic principles as the following system:
4> Software:
Using the Max. Test software.
Technical specification:
|
Mode |
WAW-300C |
WAW-600C |
WAW-1000C |
||
|
300KN |
600KN |
1000KN |
|||
|
Load accuracy |
Within ±1% |
||||
|
Test space |
Tensile |
600mm |
600mm |
600mm |
|
|
Compression |
550mm |
550mm |
550mm |
||
|
Piston stroke |
200mm |
||||
|
Distance between columns |
450mm |
500mm |
600mm |
||
|
Tensile fixture |
Round specimen fixture |
Φ6-Φ13mm Φ13-Φ26mm |
Φ13-Φ26mm Φ26-Φ40mm |
||
|
Flat specimen fixture |
0-15mm |
15-30mm |
|||
|
The width of flat specimen |
70mm |
80mm |
|||
|
Flat size |
Φ160mm |
205mm*205mm |
|||
|
Bending adjust space |
400mm |
400mm |
400mm |
||
|
Dimension |
800*600 *2100mm |
800*600 *2100mm |
900*680 *2300mm |
||
|
Power supply |
Three-phase 380V 50HZ (special requirement can be met) |
||||
在线联系供应商
Other supplier products
 |
弓形弹簧套管扶正器试验机 | |
 |
Computer Control Hydraulic Universal Testing Machine | WAW-1000C Hydraulic Universal Testing Machine With Worm Gears Used For Steel Pipe Tensile Strength Testing Machine Brief Introduction:WAW-1000C H... |
 |
Bow spring centralizers testing machine | Краткая информация Центраторы испытательная машина недавно развития электронный универсальный материал тестирование машины, которая Приводот винта ... |
 |
弓形弹簧套管扶正器试验机 | 弓形弹簧套管扶正器试验机 用于测量弓形弹簧套管扶正器 起动力，下放力，复位力试验。 最大试验力：100KN 支架：V 型支架 一．简单介绍 扶正器试验机是运用最新的先进专利技术开发的新一代滚珠丝杠驱动电子式压力材料试验机。 本系列试验机采用伺服电动系统，横梁加载，配以适当辅具，可用于金属、非金... |
 |
Bow spring centralizers testing machine | Краткая информация Центраторы испытательная машина недавно развития электронный универсальный материал тестирование машины, которая Приводот винта... |
Same products
 |
FNAC-28 2 IN 1 Type-C USB Tester Voltage Current Power Meter | 卖方: Phonefix | FNIRSI FNAC-28 Multifunctional 2 in 1 Type-C USB Tester Digital Voltmeter Ammeter Amperimetor Vol... |
 |
WF-EDU-02 Motor & Propeller Test Kit | 卖方: Wing Flying Technologies Co., Ltd | WF-EDU-02 Motor & Propeller Test Kit Product Description Motor & Propeller Test Kitsare... |
 |
WF-EDU-01 Motor and Propeller Test Kit | 卖方: Wing Flying Technologies Co., Ltd | WF-EDU-01 Motor and Propeller Test Kit Product Description Suggested Propulsion system ... |
 |
WF-EN-50 Engine Test Bench | 卖方: Wing Flying Technologies Co., Ltd | Suggested Engine 110cc-350cc Engine Max Hanging Type Engine 20kg ... |
 |
WF-EN-15 Engine Test Bench | 卖方: Wing Flying Technologies Co., Ltd | WF-EN-15 Engine Test Bench Product Description Suggested Engine 110cc Engine ... |
