gypsum powder machine
gypsum powder machine
annual capcity : 20000T to 200000T
Broken parts: 300 days times 16 hours
Grinding parts: 300 days x 24 hours
Burning parts: 300 days x 24 hours
Store conveying parts: 300 days x 24 hours
Three-phase AC380V, 50 hz;
Single-phase AC220V, 50 hz.
No waste water discharge waste residue, emissions accord with state environmental protection emissions standards.
Coal, the chain grate stoker (gas, light oil, heavy oil).
Suitable for construction building materials industry (paper face plasterboard, gesso block, paint the plaster, cement additive, etc.).
Brief production
The crusher breaks the big sized gypsum ore into small ones with 25mm in diameter. After storing and conveying,they are taken into the mill for grinding. Then, the powder concentrator carries the gypsum powders which match to the needed fineness to calciner for calcining. Others are back to the mill until it is qualified. In the end, after calcining, the qualified gypsum powder are sent to clinker container for storing, or are sent to the manufacturing workshops for use.
|
Equipment list for 60,000 tons Gypsum powder production line |
||||
|
Crusher system |
Crusher |
800x1200 |
30kw |
|
|
Elevator |
TH315 |
|||
|
Raw material container |
60m3 |
1 set |
||
|
Mill system |
The body of raymond mill |
4R3216 |
2 sets |
|
|
Driver motor |
Y225S-4 |
37kw x 2 |
||
|
Air blower motor |
Y220M-4 |
30kw x 2 |
||
|
Calcining system |
The body of calciner |
1 set |
||
|
Roots blower |
1 set |
|||
|
High voltage electrostactic |
1 set |
|||
The content of soluble without water gesso: < 5%.
Six, origin requirements (not including raw materials and finished products of warehouse)
Equipment need workshop specifications:
30 meters in length, width is 15 m.
在线联系供应商
Other supplier products
 |
gypsum board processing line | Finished gypsum board Specification Dimension of gypsum board: Thickness: 7mm-22mmwidth: 1200mm or 1220mm length: 1800mm~3600mm Types of Gy... |
 |
gypsum board manufacturing machine company | gypsum board manufacturing machine company Finished gypsum boardSpecification Dimension of gypsum board: Thickness: 7mm-22mmwidth: 1200mm or 122... |
 |
Calcium silicate board plant | Calcium silicate board plant technoloty: calcium silicate board use inorganic mineral fiber or cellulosic fiber as reinforcement agent and silice... |
 |
paper faced gypsum board production plant | company detail Hebei Xiangyi Mechanical Co., Ltd., founded in 2002, is engaged in all kinds of mechanical design and manufacture of profession... |
 |
gypsum powder production plant | Hebeixiangyi mechanical Manufacturing Co.,Ltd ,had been 15 years experience in designing and manufacturining various of industrial machineries.... |
Same products
 |
AEMK 588 Loader | 卖方: 烟台欣祥国际贸易有限公司 | 驾驶室高度：2670毫米 整车尺寸（长*宽*高）：5700*2000*2670毫米 前轮配重：4250毫米 轴距：2500毫米 离地间隙：480毫米 最大卸料高度：3500毫米 最大... |
 |
Quick Change Worktable | 卖方: Nextas Co.,Ltd | Quick Change Worktable Zero Point Pneumatic Chuck Zero Point Positioning Datum System NE... |
 |
Self Centering Vise | 卖方: Nextas Co.,Ltd | Self Centering Vise Key Advantages High precision: repeatability as tight as ≤ 0.005 mm ... |
 |
BDS Positioning Chuck | 卖方: Nextas Co.,Ltd | BDS Positioning Chuck Self Centering Vise Self-centering vise is a type of workholding tool that... |
 |
Quick Change Pallet System | 卖方: Nextas Co.,Ltd | Quick Change Pallet System Quick Change Pallet System Quick Change Pallet System delivers m... |
