Light Steel Frame Machine CZ purlin machine
CZ purlin machine was used for produce C profile and Z profile for steel constructions. our CZ purlin machine adopt PLC automatic control system, only need one person to operate.
Brief introduction of CZ machine
CZ purlin machine was used for produce C profile and Z profile for steel constructions. our CZ purlin machine adopt PLC automatic control system, only need one person to operate.
Our advantage is we have professional design team, we take EU machine quality as our machine standard. And have CE certification. We pay attention to every machine details and components, so the quality of our machines has been recognized by our customers and peers.
Light steel frame construction is very environmentally friendly, good security, is being recognized and accepted by more and more people. we are constantly improving our machines, to provide customers with more intelligent, stable and efficient equipment.
specifications
|
Parts |
Specifications |
Mark |
|
|
1 |
Forming structure |
450*200 H steel |
flatness ±0.2mm |
|
2 |
side motor for change CZ |
power: 0.75KW/set |
Total 3set Meiling motor, RV reducer |
|
3 |
Axis |
Cr12 |
CNC process and vacuum heating treatment to HRC58-60, tolerance +0.05 mm--0.08mm |
|
4 |
roller |
40Cr |
CNC process and thermal refining HRC28-32, then finishing, polishing and galvanized Tolerance -0.02mm -0.05mm |
|
5 |
Side board |
A3 steel thickness43mm CZ change position have safety pin |
|
|
6 |
Feeding |
Guide axis and roller |
|
|
7 |
Leveling |
7 axis（up 3 down 4）and one more guiding, heating treatment and polishing and galvanized |
|
|
8 |
Straightening |
Ten roll CZ dedicated to two axial alignment + four roll two axial alignment, a total of two alignment units |
|
|
9 |
Punching before forming |
One signal + one set double+ two set side, signal hole φ14 mm, double hole size14*22 mm.（can make according to customer order） |
|
|
7 |
cutting |
Cutting before forming and end cutting infinite system Scissors material: Cr12MoV |
|
More information visit our .
在线联系供应商
Other supplier products
 |
Roof ridge tiles metal roof ridge cap roll forming machine | Ridge tiles, popularly speaking, are tiles on the ridge. In terms of adaptability, they can be understood as tiles that can drain the same part to... |
 |
Trapezoid Roofing 20 Machine Trapezoidal sheet making machine | Trapezoidal sheet making machine was used for corrugate metal sheet to different profiles, then these profiles can be used as roofing, wall, fence... |
|
|
Light Steel Frame Machine CZ purlin machine | CZ purlin machine was used for produce C profile and Z profile for steel constructions. our CZ purlin machine adopt PLC automatic control system, ... |
 |
Low noise light steel frame light keel roll forming machine | Product Description Light steel keel is a new type of building material. Light steel keel is widely used in hotels, terminals, bus stations, stati... |
 |
Light Steel Frame Machine produce C and U profile for light steel constructions | Light steel frame machine was used for produce C and U profile for light steel constructions. Brief introduction of Light steel frame machine Ligh... |
Same products
 |
高铁站金属轨成型机 | 卖方: 速普达有限公司 | 高铁站金属轨成型机 |
 |
Four-knife splitting machine | 卖方: Beijing REIT Technology Development Co., Ltd | Four-knife splitting machine This machine is a four-knife splitting machine with independent hyd... |
 |
Insulation block benzene board insertion device | 卖方: Beijing REIT Technology Development Co., Ltd | Insulation block benzene board insertion device The thermal insulation block plug board device c... |
|
|
Light Steel Frame Machine produce C and U profile for light steel constructions | 卖方: DLY International Import and Export Ltd | Light steel frame machine was used for produce C and U profile for light steel constructions. Br... |
|
|
Low noise light steel frame light keel roll forming machine | 卖方: DLY International Import and Export Ltd | Product Description Light steel keel is a new type of building material. Light steel keel is wid... |
