Insulation block benzene board insertion device
Insulation block benzene board insertion device
The thermal insulation block plug board device comprises a fixed frame placed horizontally, a pallet is placed horizontally on the frame of the fixed frame, a movable frame powered by a driving oil cylinder is embedded in the fixed frame, and a movable frame is provided on the movable frame for pushing the pallet The moving push plate teeth, a driving shaft system is arranged under one end of the fixed frame, the driving shaft system is connected with the driving equipment used to provide power, and a driven shaft system is arranged under the other end of the fixed frame, and the driving shaft system is connected with the driven shaft. The systems are connected by two transmission chains. The two transmission chains are located on the outer sides of the two long sides of the fixed frame and are parallel to the two long sides of the fixed frame. The sides are respectively connected with a transmission chain, and the benzene board tray is provided with a positioning groove for positioning the benzene board. It solves the complex structure, low production efficiency, unreliable operation and potential safety hazard for operators in the existing board board device. The problem.
The concrete small hollow block benzene board thermal insulation composite wall has a simple structure, and blocks are used as load-bearing walls and protective walls on the inside and outside of the outer wall respectively, the benzene board is sandwiched in the middle, and the knotted mesh is placed on the inside and outside of the external wall. The main technological process is: leveling the elastic wire, arranging the blocks, laying the outer side of the outer wall, inserting the board, placing the mesh that is tied with the outer wall, and finally laying the inner side of the outer wall. This process is repeated continuously. During construction, attention should be paid to the treatment of block benzene board composite thermal insulation walls, core columns and special parts.
Blender Grouped Equipment
★Concrete mixer
A concrete mixer is a machine that mixes cement, sand and gravel aggregates and water into concrete mixtures. It is mainly composed of mixing drum, feeding and discharging mechanism, water supply system, prime mover, transmission mechanism, frame and supporting device. According to the working nature, it can be divided into batch type (batch type) and continuous type; according to the stirring principle, it can be divided into self-falling type and forced type; according to the installation method, it can be divided into fixed type and mobile type; According to the structure of the mixing drum, it is divided into pear type, drum type, double cone, disc vertical shaft type and circular groove horizontal shaft type.
The concrete mixer includes a power mechanism connected with the transmission mechanism through a shaft and a drum driven by the transmission mechanism. A ring gear is arranged on the drum cylinder body, and a gear is arranged on the transmission shaft to mesh with the ring gear. The utility model has a simple and reasonable structure. After the gear and the ring gear are meshed, the slip phenomenon between the supporting roller and the mixer drum can be effectively overcome in rainy and foggy weather; the adopted transmission mechanism can further ensure the elimination of the gap between the supporting roller and the mixer drum. of slippage.
★Safe to use
在线联系供应商
Other supplier products
 |
Introduction for RTS6C block brick making machine with wholesale price | 1) STATIONARY BLOCK MACHINE REIT- RT6C RT6 CAPACITY/PER PALLET : - 6 HOLLOW BLOCKS 400×200×200MMPALLET SIZE : - 900×700×... |
 |
Four-knife splitting machine | Four-knife splitting machine This machine is a four-knife splitting machine with independent hydraulic system, convenient electric control system,... |
 |
REIT RT15A Completely Automatic Concrete Block Production Line | REIT RT15A Completely Automatic Concrete Block Production Line The automatic concrete block making machineis made by three main parts, including b... |
|
|
Insulation block benzene board insertion device | Insulation block benzene board insertion device The thermal insulation block plug board device comprises a fixed frame placed horizontally, a pall... |
 |
RTQT6 Fully Automatic Concrete Block Production Line | RTQT6 Fully Automatic Concrete Block Production Line The block making machine can be universally used for the manufacturing of pavers with and wit... |
Same products
 |
高铁站金属轨成型机 | 卖方: 速普达有限公司 | 高铁站金属轨成型机 |
|
|
Four-knife splitting machine | 卖方: Beijing REIT Technology Development Co., Ltd | Four-knife splitting machine This machine is a four-knife splitting machine with independent hyd... |
|
|
Insulation block benzene board insertion device | 卖方: Beijing REIT Technology Development Co., Ltd | Insulation block benzene board insertion device The thermal insulation block plug board device c... |
 |
Light Steel Frame Machine produce C and U profile for light steel constructions | 卖方: DLY International Import and Export Ltd | Light steel frame machine was used for produce C and U profile for light steel constructions. Br... |
 |
Low noise light steel frame light keel roll forming machine | 卖方: DLY International Import and Export Ltd | Product Description Light steel keel is a new type of building material. Light steel keel is wid... |
