.

AC ISOLATION TRANSFORMER

Isolation transformer refers to a transformer with electrical isolation between the input winding and the output winding. The isolation transformer is used to avoid accidentally touching the charged body at the same time. The isolation of the transformer is to isolate the respective currents of the primary and secondary windings. In the early days, it was used in the power industry in European countries. It was widely used in the electronics industry or industrial and mining enterprises, machine tools and mechanical equipment in general circuit control power, safety lighting and indicator lights.

The main function of the isolation transformer is to completely insulate the electrical on the primary side and the secondary side and also isolate the circuit. In addition, the high-frequency loss of its iron core is used to prevent high-frequency noise from entering the control loop. Using an isolation transformer to suspend the secondary to the ground can only be used in occasions with a small power supply range and short lines. At this time, the capacitance current to the ground of the system is too small to cause personal injury. Another very important role is to protect personal safety! Isolate dangerous voltages.

With the continuous development of the power system, the transformer, as a key equipment in the power system, plays an increasingly important role. Its safe operation is directly related to the reliability of the entire power system. The deformation of the transformer coil refers to the occurrence of the coil after being stressed. The axial and width dimension changes, body displacement, coil distortion, etc. There are two main reasons for the deformation of the transformer coil: one is that the transformer is unavoidably affected by external short-circuit faults during operation; the other is that the transformer accidentally collides during transportation and lifting.



在线联系供应商

至: Fujian Hongyan Electrical Company Limited
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

AC REACTOR (OUTPUT REACTOR & INPUT REACTOR)
AC REACTOR (OUTPUT REACTOR & INPUT REACTOR) It is installed at the output end of the inverter to limit the capacitive charging current of the cable connecting the inverter and the motor, and ...
AC ISOLATION TRANSFORMER
AC ISOLATION TRANSFORMER Isolation transformer refers to a transformer with electrical isolation between the input winding and the output winding. The isolation transformer...
WAVE FILTER
WAVE FILTER The sine wave filter is driven by PWM inverter, and its switching frequency range is between 2-8khz, which still provides sine wave output voltage....
供应产品

Same products

SG(B) 10 Type 10kv Series Non Encapsulated Coil Transformer
SG(B) 10 Type 10kv Series Non Encapsulated Coil Transformer 卖方: YueBian Electric Co.,Ltd General introduction of SGB10 Cast Resin Transformer: Cast Resin Transformer, is a kind of dry ty...
SFZ11 Type 35kv Series On-Load Regulator Transformer
SFZ11 Type 35kv Series On-Load Regulator Transformer 卖方: YueBian Electric Co.,Ltd General introduction of onload transformer: This transformer meets the criteria of GB1094 and GB/...
SC(B) Type 10kv Series Resin Insultation Dry-Type Transformer
SC(B) Type 10kv Series Resin Insultation Dry-Type Transformer 卖方: YueBian Electric Co.,Ltd General introduction of SGB10 Cast Resin Transformer: Cast Resin Transformer, is a kind of epoxy ...
S13-M Type 10kv Series Low Loss Distribution Transformer
S13-M Type 10kv Series Low Loss Distribution Transformer 卖方: YueBian Electric Co.,Ltd General introduction of S13-M Type 10kv Series Low Loss Distribution Transformer S13 transformer ...
S11 Type 10kv Series Low Loss Distribution Transformer
S11 Type 10kv Series Low Loss Distribution Transformer 卖方: YueBian Electric Co.,Ltd General introduction of S11 Type 10kv Series Low Loss Distribution Transformer S11 power transfor...