Metal powder sintered filter element
Product profile
Sintered metal powder filter core uses metal powder as raw material without adding adhesive. After cold isostatic pressing, it is made by high temperature vacuum sintering. The pore size and distribution of the elements can be adjusted by selecting the particle size and technological parameters of metal powder. According to the characteristics of pore structure, material composition and compressive strength of different filter materials, the filter products which are suitable for customers are developed. The sintered metal powder filter core can realize the precision filtration of micron scale, can separate the solid particle impurity in the liquid and gas, when the fluid passes through the filter element with certain precision, the impurity is blocked on the filter core surface to form the filter cake. The pure fluid flows out through the filter core to make the contaminated or impurity fluid clean to the state required for normal production, so as to ensure that the downstream device obtains the pure product or the normal operation of the protective equipment.
High crushing strength, Impact resistant, Alternating load capacity is superior to the other metal filter material. Air permeability, Separation effect is stable. Fixed pore structure, No dielectric loss. High mechanical strength, Fatigue resistance, Wear resistance. A wide range of high and low temperature adaptability and chemical stability. Can be carried out online cleaning, Back again and again
Technical parameters
● Working pressure: 1~40MPa
Filtration precision: 0.5~50um
● Working temperature: -55 ~ +300℃
● Material: SS304. SS316L. Titanium alloy
Application field
● Catalyst filtration
● Gas and gas
● Food and Beverage
●Boiling vaporization bed
●Liquid tank bubble
●Balance, damping flow
●Steam
● Probe protection of sensor
● Filtering on pneumatic equipment, silencing
在线联系供应商
Other supplier products
 |
燃油过滤器-微粒过滤器 | 产品介绍 清洁的燃料是工程正常运行的重要保证，颗粒过滤器是去除燃料微粒过滤器中杂质的有效装置，它由过滤元件、壳体和空气排气阀、压差计、排水阀、取样接头等组成，过滤后的油通过进气管进入过滤壳的下部，然后从过滤器的外部进入。在内部，较厚的颗粒会立即沉淀(由污水排出)，较小的颗粒将被过滤元件截取，... |
|
|
Metal powder sintered filter element | Product profile Sintered metal powder filter core uses metal powder as raw material without adding adhesive. After cold isostatic pressing, it is ... |
 |
Natural gas filter element | Product profile Many gas lines have oil and water in mist or droplet form that, along with solid contaminants such as pipe scale, dirt, and rust, ... |
 |
Metal pleating filter element | Product profile This series of filter element with different wire diameter and mesh stainless steel wire mesh, In a specific order, through high ... |
 |
Fuel filter element | Product profile Clean fuel is an important guarantee for the normal operation of the engine. Filters are one of the guarantees for fuel cleanlines... |
Same products
 |
470nm Low Pass Filter | 卖方: Shandong Yanggu Constant Crystal Optics, Inc | Parameter 470nm Low Pass Filter CWL 470±10nm Peoduct s... |
 |
Lab. type for RBC | 卖方: Guangzhou DaJi Medical Science and Technology Co., Ltd | Computer generated filter housing with optimal characteristics; Melt-blown non-woven polyester f... |
 |
Single filter for PRP | 卖方: Guangzhou DaJi Medical Science and Technology Co., Ltd | The PRP leukodepletion filteris ideal for use in medical facilities and research labs that requir... |
 |
Single filter for RBC | 卖方: Guangzhou DaJi Medical Science and Technology Co., Ltd | Designed for 1 unit of RBC suspension from 450/500ml of whole blood; Computer generated filter h... |
 |
Single filter for platelet | 卖方: Guangzhou DaJi Medical Science and Technology Co., Ltd | Designed for 5~6 units manual collection of platelet or one unit of machine collection of platele... |
