GlobeCore UVB -1 productivity of 1 m3 per hour
UVB-1 bitumen unit is designed for production both anionic and cationic bitumen emulsions, which are used in road construction as follows:
base coat on old road top before application of asphalt-concrete;
preparation of cold asphalt concrete mixes;
surface treatment of road top;
thin film protective coats;
patch repair of roads etc.
The unit is designed for operation at asphalt concrete production facilities. It can be operated either outdoors under canopy or indoors.
UVB-1 bitumen unit is semi-automatic, consists of several individual assemblies on a single frame and interconnected by pipelines.
An external source of 6 – 8 bar compressed air is required for operation of pneumatic systems of the unit.
Specifications
Parameter
Value
1 Max production capacity (including preparation time), m3/hour 1
2 Bitumen consumption (90…130 penetration), minimum, m3/hour 0,97
3 Water consumption, m3/hour 0,6…0,7*
4 Flux consumption (if bitumen penetration below 90), dm3/hour 0…50*
5 Acid consumption, dm3/hour 1…20*
6 Emulsifier consumption, dm3/hour 1…20*
7 Adhesion additive consumption, dm3/hour 1…20*
8 Max bitumen input pressure, MPa 0,2
9 Bitumen to mixer pressure, MPa 14…16
10 Water phase to mixer pressure, MPa 0,2
11 Bitumen input temperature, 0С 140-160
12 Water input temperature, 0С 40-60
13 Emulsion head after unit, meters, max 15
14 Max nominal power, kW 17
15 Power voltage at 50 Hz AC, V 380
16 Compressed air pressure, bar 4…6
17 Air consumption, dm3/minute 100
18 Dimensions, mm:
-length 2250
-width 1750
-height 1840
19 Weight, kg 1050
* Depends on production recipe!
Other supplier products
供应产品
Same products