Smoke toxicity test equipment for building materials
Standards
ASTM D2843 Smoke Density Test
GBT20285-2006
DIN53436
JIS1321
Application
Smoke Toxicity Tester Flammability Analyzer for Building Material DIN 53436 is designed according to DIN53436.
Smoke Toxicity Tester Flammability Analyzer for Building Material DIN 53436 realized smoke of burning material continuous and stable production and gas extraction, flue gas quantitative description of smoke concentration and accurate calculation of the rate of smoke production, thus it could be used for different circumstances of different materials (including different rates and different concentrations of smoke production) and animal exposure evaluation at different times.
Technical parameters
The ring furnace is heated, and the sliding module drives the ring furnace to move automatically to meet the quartz tube heating requirements. The operating temperature can reach 1000° C, accurate temperature control, the temperature error is less than 1°C, the movement speed :10MM/MIN, the moving distance 750MM;
Equipped with high temperature resistant thermocouples for ring furnace temperature measurement and ring furnace combustion
The calibration of heat is equipped with a high-temperature quartz boat, and the sample is stored in a quartz tube to be heated and decomposed:
Thermocouple: Outer diameter 1.5MM high temperature resistance 0-1000 degrees;
Equipped with rotor flow meter for carrier gas and dilution gas supply, equipped with convenient control of high-precision valve body for gas switching;
Acrylic poison box, you can watch the movement of mice inside the window.
在线联系供应商
Other supplier products
 |
Martindale Abrasion Tester for Fabric & Textile Durability | Standard ASTM D4966(Standard Test Method for Abrasion Resistance of Textile Fabrics) ISO 12947-1/2/3/4(Textiles - Determination of the Abrasion R... |
 |
Automobile Wire Cross-linking Test Device | Applicable Standards: SAE J1128 - 2005 and other standards Main Parameters: 1. Test rod: Φ6mm, 300mm in length 2. Hot plate specification... |
 |
Impact strength tester for car seat headrest-QINSUN | Applicable standards: GB 15083-2006 "Automobile seats, seat fixtures and headrest strength requirements and test methods" : This standard specifie... |
 |
Car seat component clearance test bench-QINSUN | Applicable standards: Car seat component clearance test benches usually follow the following domestic and international standards: QC/T 805-200... |
 |
Retractable CIP rotary spray nozzle | STD-150 retractable CIP rotary spray nozzle Dynamic Retractor CIP systems clean even the remotest corners. Where to attach the spray head? This qu... |
Same products
 |
HDPE高速水冷双壁波纹管生产线 | 卖方: Shandong HUASU Plastic Technology Co.,Ltd. | 机头模具采用双流道结构、氮化磨光处理机头，偏壁调整方便快捷，保证内外层壁厚均匀和稳定成型。 最新设计密闭压力水冷冷却结构，冷却充分，多点分布真空系统，效率更高，生产速度更快。 双层在线扩口功... |
 |
PanEVAP & MVR system | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat... |
 |
PanGAP wide gap welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel... |
 |
PanBloc welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac... |
 |
PanBox welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBox welded plate heat exchangerconsists of a laser welded plate pack with optimized corrugated... |
