Smoke toxicity test equipment for building materials
Standards
ASTM D2843 Smoke Density Test
GBT20285-2006
DIN53436
JIS1321
Application
Smoke Toxicity Tester Flammability Analyzer for Building Material DIN 53436 is designed according to DIN53436.
Smoke Toxicity Tester Flammability Analyzer for Building Material DIN 53436 realized smoke of burning material continuous and stable production and gas extraction, flue gas quantitative description of smoke concentration and accurate calculation of the rate of smoke production, thus it could be used for different circumstances of different materials (including different rates and different concentrations of smoke production) and animal exposure evaluation at different times.
Technical parameters
The ring furnace is heated, and the sliding module drives the ring furnace to move automatically to meet the quartz tube heating requirements. The operating temperature can reach 1000° C, accurate temperature control, the temperature error is less than 1°C, the movement speed :10MM/MIN, the moving distance 750MM;
Equipped with high temperature resistant thermocouples for ring furnace temperature measurement and ring furnace combustion
The calibration of heat is equipped with a high-temperature quartz boat, and the sample is stored in a quartz tube to be heated and decomposed:
Thermocouple: Outer diameter 1.5MM high temperature resistance 0-1000 degrees;
Equipped with rotor flow meter for carrier gas and dilution gas supply, equipped with convenient control of high-precision valve body for gas switching;
Acrylic poison box, you can watch the movement of mice inside the window.
Send product request
Other supplier products
 |
Air Permeability Tester-QINSUN | Air Permeability Tester of textile fabrics complies with ASTM D737. ISO 9237/7231. BS 5636. etc. It is used to test the resistance of the flow of a... |
 |
Low Temperature Bending Tester | Standards ASTM D1790: Brittleness temperature testing for plastic sheeting under impact. ASTM D1593M: Low-temperature flexibility of coated fabrics... |
 |
Anti-glare Panel Falling Weight Tester | Meet the standard GB/T24718-2023，GB/T 24718-2009，JTG/T D33-2012 Scope of application The anti-glare board impact testing machine is designed and... |
 |
STD 200 high pressure tank cleaning heads, Self-propelled Tank Cleaner | The "3D Nozzle" is a self-rotating nozzle unit used for cleaning polymerization tanks, reactors, spray dryers, and various other tanks. The cleani... |
 |
Rain Tester | Standard AATCC 35: Water Resistance: Rain Test for Fabrics BS EN ISO 22958: Textiles – Determination of Resistance to Water Penetration &nd... |
