Steel Structure Fireproof Coating Small Sample Test Furnace
Product Overview
TheSmall Sample Test Furnace for Steel Structure Fireproof Coatingis a specialized thermal testing instrument designed to evaluate the fire resistance and structural integrity of fireproof coatings on steel substrates under controlled fire conditions. It simulates real-world fire scenarios to quantify flame spread, heat resistance, and coating adhesion, ensuring compliance with international fire safety standards for steel structures.
Type: High-temperature thermal testing furnace
Standards Compliance:
ASTM E119 (Fire resistance rating)
ISO 834-1 (Standard fire curve)
GB/T 9978.1 (Chinese fire resistance test)
Key Metrics
Fire Resistance Duration (minutes)
Surface Temperature Rise (ΔT, °C)
Coating Adhesion Strength (MPa)
Sample Size: Up to 150×150×50mm (steel plate with coating)
Key Features
Compact Design:
Optimized for small steel samples (e.g., bolts, brackets)
Lightweight (≤50kg) for lab/bench use
Advanced Features:
Real-time thermal imaging (°C gradient mapping)
AI-based coating degradation analysis
Programmable multi-stage fire cycles
Applications
Construction:Testing fireproof coatings on steel beams/columns
R&D:Developing high-temperature-resistant coatings
Quality Control:Batch inspection of pre-coated steel components
Forensic Analysis:Evaluating fire damage to structural elements
Standard Operation Workflow:
Sample Preparation: Mount steel plate with coating in sample holder
Parameter Setup: Select fire curve (e.g., ISO 834 standard)
Testing: Initiate heating cycle (e.g., 1-hour fire resistance test)
Analysis: Measure temperature rise and coating integrity
Cleaning: Automated ash removal system
Safety Precautions
Heat-resistant gloves and goggles required
Fire-rated enclosure mandatory (class A60)
Maintain 1m clearance from exhaust vents
Technical Parameters
| Parameter | Specifications |
|---|---|
| Temperature Range | 20°C–1000°C (±1°C accuracy) |
| Heating Rate | 10°C/min (PID-controlled ramping) |
| Chamber Dimensions | 300×300×400mm (L×W×H) |
| Heating Elements | Silicon carbide (SiC) ceramic heaters |
| Control System | Programmable logic controller (PLC) + 7-inch touchscreen |
| Power Supply | 380V/50Hz, 2.5kW |
| Dimensions | 600×500×800mm (L×W×H) |
在线联系供应商
Other supplier products
 |
Universal Wear Tester | Standards ASTM Standards: D3514, D3885, D3886 (textile, coating, and plastic wear resistance) AATCC Standards: 119, 120 (fabric abrasion and pi... |
 |
Footwear Cold Insulation Tester | Product Introduction Shoes cold resistance testing machine is used to test finished shoes, rubber, sole, synthetic leather, plastic and other test... |
 |
Thermostatic water tank tester | Scope of application: Thermostatic water tank is widely used in drying, concentrating, distillation, impregnating chemical reagents, impregnating ... |
 |
Fogging Tester for Automotive & Textile Materials-QINSUN | Standard DIN 75201(Determination of the Evaporation Behavior of Materials in Motor Vehicles) ISO 6452(Rubber- or Plastics-Coated Fabrics &mdash... |
 |
Automobile Headrest Strength Tester-QINSUN | Applicable standards: GB 11550-2009"Automobile seat headrest strength requirements and test methods" : This standard specifies the static streng... |
Same products
 |
Blanket Flammability Test Machine | 卖方: Standard Groups | Bed Blanket Flammability Tester-It is mainly used for testing the flame retardant performance of ... |
 |
High Temperature Oxygen Index Tester | 卖方: Standard Groups | The High-Temperature Oxygen Index (TOI) measuring instrument determines oxygen index at up to 125... |
 |
Limiting Oxygen Index Tester | 卖方: Standard Groups | The Limiting Oxygen Index Tester measures the minimum oxygen concentration needed to sustain comb... |
 |
Vertical Flammability Tester | 卖方: Standard Groups | Vertical Flammability Chamber for measuring the vertical flame spread for children’ sleepwe... |
 |
45 Degree Flammability Tester | 卖方: Standard Groups | Application 45 Degree Flammability Tester is used to determine the burning characteristics of te... |
