Kinematic Viscosity Tester-Petroleum Products Test Equipment
Application
You can use this instrument in the following scenarios:
(1) Testing petroleum and petroleum-based products.
(2) Measuring physical properties of chemical liquids.
(3) Oilfield product testing and R&D.
(4) Monitoring fuel and lubricants in railways and transportation systems.
(5) Laboratory and university research on liquid viscosity.
(6) Standardized measurements in metrology and calibration departments.
Standards
You can operate this tester in compliance with the following standards:
(1) GB/T 265-2017 – Petroleum Products: Determination of Kinematic Viscosity.
(2) ASTM D445-2020 – Kinematic Viscosity of Transparent and Opaque Liquids (for dynamic viscosity calculation).
(3) ISO 3104:2021 – Petroleum Products: Determination of Kinematic Viscosity.
(4) IP 71:2020 – Petroleum Products: Determination of Kinematic Viscosity.
Parameters
| Parameter | Unit | Value |
|---|---|---|
| Applicable Fluid | – | Newtonian liquids |
| Heating Method | – | Water bath with constant temperature electric heating |
| Test Capillaries | pcs | 5 (simultaneous testing) |
| Heating Medium | – | Clean water |
| Temperature Range | ℃ | Room temperature – 100 |
| Heating Power | W | 1700 |
| Temperature Control | – | Automatic, ±0.1℃ |
| Bath Dimensions | mm | Φ300 × 300 |
| Overall Dimensions | mm | 540 × 370 × 640 |
在线联系供应商
Other supplier products
 |
Pendulum Impact Tester | 1. Function and Application The Pendulum Impact Tester is designed to evaluate automotive seating systems for compliance with head impact requirem... |
 |
ICI Pilling Testing Machine | Product Information 1.Equipped with four pilling Boxes; 2.With the function of forward and reverse running; 3.Optional speeds of 20. 30. 40. 45.... |
 |
Safety Helmets Against Molten Metal Splashing Tester | The Safety Helmets Against Molten Metal Splashing Tester is designed to evaluate helmet performance under extreme thermal hazards, simulating molte... |
 |
Leather Freezing Flexing Tester | Testing Equipment | Applicable Standards The tester adheres to international standards for material testing at low temperatures, including: ISO 4674-2(Rubber- or pla... |
 |
Heel Impact Tester | Heel Impact Tester is used to determine the impact strength of heels of ladies’shoes. Application: This Heel Impact Tester is used to det... |
