Hydraulic oil purification filtration tester
The Hydraulic Oil Purification Filtration Tester is designed to maintain and improve oil cleanliness in hydraulic and lubrication systems. You can use this device to remove solid particle contaminants through multi-stage filtration and bypass circulation, ensuring stable system operation and extending the service life of hydraulic components and the entire system. It supports both online purification during operation and offline oil regeneration during filling, oil replacement, or maintenance.
Standards
You can operate this device in compliance with international and domestic standards:
(1) GB/T 14039 — Hydraulic transmission: Code for solid particle contamination levels in hydraulic fluids;
(2) GB/T 18854 — Hydraulic transmission: Automatic particle counting method for liquid contamination measurement;
(3) ISO 4406 — Hydraulic fluid contamination: Coding of solid particle contamination levels;
(4) ISO 4407 — Hydraulic fluid contamination: Measurement of particle contamination using optical automatic counters;
(5) NAS 1638 — Aerospace hydraulic system contamination levels.
Parameters
| Item | Parameter |
|---|---|
| Rated Flow | 1–5 L/min, 10 L/min, 25 L/min |
| Applicable Medium | Lubricating oil, hydraulic oil |
| Medium Viscosity | ≤ 100 cSt |
| Operating Temperature | Ambient |
| Rated Working Pressure | 0.6 MPa |
| Original Pressure Drop | ≤ 0.08 MPa |
| Suction Filter Precision | 80 μm / 100 μm |
| Pre-Filter Precision | 10 / 15 / 20 / 40 μm |
| Fine Filter Precision | 3 / 5 / 10 μm |
| Achievable Oil Cleanliness | NAS 1638 ≥ 4, up to 0 |
在线联系供应商
Other supplier products
 |
fabric wet adhesion performance tester - Test Equipment | The tack - holding tester, also known as the tack - holding property tester, tack - holding force tester, or holding - power tester, is a device sp... |
 |
Steam Shrinkage Test Machine - lab instrument | I. Product Overview TheVapor Shrinkage Testeris a specialized thermal analysis instrument designed to measure dimensional changes in textiles, pol... |
 |
45 Degree Flammability Tester - lab instrument | Application: 45 Degree Flammability Tester is used to determine the burning characteristics of textiles fabric under controlled conditions. This t... |
 |
EN20344 Sole Flexing Tester | Install the sole test piece on the ENFlexingtesting machine, so that the incision falls just above the center of the rotating shaft of the ENFlexin... |
 |
ICI Pilling Testing Machine | Product Information 1.Equipped with four pilling Boxes; 2.With the function of forward and reverse running; 3.Optional speeds of 20. 30. 40. 45.... |
