UL 2596 Torch and Grit (TaG) Tester，Test Equipment for Battery Enclosure Materials
Whats/App: +86 156 1874 6768
Web: standard-groups.com
The Gravel Flame Jet Test Apparatus is designed to evaluate battery enclosure materials under simulated thermal runaway conditions. You can use this instrument to test sheet materials rather than entire battery assemblies, allowing you to efficiently assess material performance while reducing development costs and time. It provides precise control over flame and particle exposure, helping you determine the thermal and mechanical resilience of battery housing materials.
Application
You can use the apparatus in the following scenarios:
Battery housing material evaluation: Assess thermal and mechanical performance of sheet materials under simulated battery thermal runaway conditions.
Coating and surface protection testing: Determine material resistance to flame and particle impact.
Research and development: Optimize battery safety designs and reduce prototype testing costs.
Quality control laboratories: Routine evaluation of materials for compliance with flame and impact resistance standards.
Compatible test components: Flame jet burner, particle injection system, stainless steel sample racks, temperature measurement system.
Standards
This test apparatus conforms to a wide range of international standards:
UL 2596 Ed. 2 — Test methods for thermal and mechanical performance of battery enclosure materials
ASTM D3170 — Test method for coating and material gravel impact resistance
SAE J400 — Automotive surface coating gravel impact standard
ISO 20567‑1 — Paint and varnish coating gravel impact resistance, Part 1
DIN 55996‑1:2001 — Coating material gravel impact strength, Part 1
ISO 22899‑1 — Passive fire protection materials, flame jet performance test, Part 1
EN 60695‑11‑20 — Fire testing methods
ISO 3795 — Determination of burning behavior of materials used in road vehicle interiors
UL Torch and Grit (TaG) Test — Flame and particle medium test
Parameters
| Parameter | Specification |
|---|---|
| Dimensions | 1600 × 750 × 2100 mm |
| Weight | 250 kg |
| Flame Jet Diameter | 28.6 mm |
| Methane Supply Ports | 30 |
| Oxygen Supply Ports | 78 |
| Flame Output | 3 kW (flame), 1.5 g/s (particle flame) |
| Ignition | Electric spark ignition |
| Methane Flow Controller | 0–10 L/min, accuracy ±2% F.S |
| Oxygen Flow Controller | 0–50 L/min, accuracy ±2% F.S |
| Temperature Measurement | 4-channel K-type thermocouples (30 AWG) |
| Sample Rack | Stainless steel, calibration and test positions, automatic insertion |
| Control System | Integrated control box with manual/automatic operation and data acquisition |
| Software | Windows-based, supports temperature calibration, manual/automatic programs, data logging, and report export |
Features
Integrated steel structure: Open test platform reduces heat accumulation.
Smoke collection: Stainless steel hood with adjustable exhaust airflow for efficient fume removal.
Imported flame burner: Compatible with UL laboratory standards, provides both flame jet and particle flame.
Precise flow control: Mass flow controllers for methane, oxygen, and air with temperature and pressure compensation.
Automated operation: Flame application and particle flame control with electric spark ignition.
Advanced temperature monitoring: Four thermocouples measure flame and sample temperatures at multiple points.
Flexible sample positioning: Calibration and test positions with automatic sample insertion.
User-friendly software: Manual and automatic modes, temperature calibration, time-temperature and particle-time curve generation, and report output.
Accessories
Flame jet burner with particle injection system
Stainless steel sample racks (calibration and test positions)
Smoke collection hood with adjustable airflow
Temperature measurement thermocouples and mounting accessories
Control box with integrated software and data acquisition system
Test Procedures
Install the test sample on the stainless steel sample rack in the designated test position.
Connect the methane, oxygen, and compressed air supplies.
Activate the flame jet burner and particle injection system according to the software control.
Record flame exposure and particle impact parameters using the thermocouples and data acquisition system.
Analyze the material’s thermal and mechanical performance based on temperature, time, and particle exposure data.
Export and review test reports using the integrated software.
Maintenance Information
Clean the flame burner and particle supply ports regularly to ensure consistent flame quality.
Check and calibrate mass flow controllers for methane, oxygen, and air periodically to maintain accuracy.
Inspect sample racks and thermocouples before each test to prevent mechanical deformation or sensor errors.
Keep the control box and software updated and ensure proper ventilation around the exhaust system.
在线联系供应商
Other supplier products
 |
Falling Sand Abrasion Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com The falling sand abrasion tester is used to test the abrasion resistance of coatings under ... |
 |
Aerosol Spray Ignition Tester according to ISO Standards | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Scope of Application and Standards The Foam Aerosol Flammability Tester is d... |
 |
BBA steady state solar simulator tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standard IEC 61215: Terrestrial Photovoltaic (PV) Modules – Design Qualification and... |
 |
Shoe heat insulation meter -- sand bath | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standard GB/T 20991: Determines thermal insulation of safety shoe soles under simulated ho... |
 |
Glow Wire Tester | Automotive Wire Fire Resistance Test Equipment Manufacturer | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Features Transparent safety door The heat-resistant glass observation windo... |
Same products
 |
MMA-120 Handheld Arc Welder | 卖方: 871183 | The MMA-120 Handheld Arc Welder from ChuangLi Electronic Technology Co., Ltd. is designed for con... |
 |
SHX Series Circulating Fluidized Bed Steam Boiler | 卖方: Hebei Genjux Boiler Co.,Ltd | Capacity: 10-35 t/hWorking pressure: 1.25-2.5 MPaOperating temperature: 194-400 ℃Applicable to bi... |
 |
YQ(Y)W Series Oil/Gas Fired Vertical Thermal Oil Boiler | 卖方: Hebei Genjux Boiler Co.,Ltd | Capacity: 7000-29200 KWOperating pressure: 0.8-1.0 MPaOperating temperature: 320℃Operating mode: ... |
 |
DHL Series Coal-Fired Steam Boilers | 卖方: Hebei Genjux Boiler Co.,Ltd | Capacity: 35-75 t/hOperating pressure: 1.25-5.4 MPaOperating temperature: 194-485℃Applicable to b... |
 |
SZL Series Biomass Steam Boiler | 卖方: Hebei Genjux Boiler Co.,Ltd | Capacity: 6-35 t/hWorking pressure: 1.0-2.5 MPaOperating temperature: 184-350 ℃Applicable fuel bi... |
