Veslic Rub Fastness Tester
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Application
It simulates real-world wear scenarios, such as foot rubbing, cross-legged seating, or material abrasion, using felt, rubber, abrasive papers, or fabric pads.
The system allows testing dry or wet, using distilled water or synthetic perspiration, and evaluates color change or marring against standard gray scales in controlled lighting conditions.
Test Standards
BS 1006 UK-LG – Colorfastness to Rubbing
DIN 53-339 – Textiles: Determination of Colorfastness to Rubbing
EN ISO 11640 – Leather: Colorfastness to Rubbing
IUF 450 / SLF 450 / Veslic C4500 / C4505 / C4580 – Industry-specific rubfastness testing protocols
Custom OEM or laboratory standards – Configurable per user requirements
Features and Advantages
Three Independent Stations: Allows simultaneous testing of multiple samples under the same or different conditions.
Customizable Test Loads: Each station supports 500 g standard load with additional 500 g optional weight.
Flexible Test Pads: Supports felt, rubber, abrasive paper, and fabric to simulate diverse abrasion scenarios.
Dry or Wet Testing: Accommodates water or synthetic perspiration for realistic material evaluation.
Accurate Color Assessment: Visual evaluation with gray scales under controlled lighting for standardized results.
Durable Construction: Non-corrosive aluminum and stainless steel components ensure long service life.
Adjustable Speed and Jog Controls: Fine-tune testing speed for specific protocols.
Operator Safety: Protective vented cover minimizes risk of injury during operation.
Friction Heat Management: Built-in down draft fan prevents temperature rise that could affect test accuracy.
High Reliability: Brushless motors and precision bearings ensure smooth, maintenance-free operation.
Test Procedures
Cut specimens and rubbing media according to the relevant standard and perform preconditioning if required.
Mount the specimen onto the clamp and apply the specified linear tension.
Select and install the felt pad or other specified rubbing medium.
Set the rubbing load, speed, and number of cycles.
Start the tester to perform dry or wet rubbing.
After completion, remove the specimen and rubbing medium.
Evaluate color change and color transfer using the grey scale under standard lighting conditions.
Record results and generate test documentation.
Maintenance Information
Regularly inspect felt pads and rubbing media; replace when worn or contaminated.
Keep clamps and rubbing heads clean to avoid cross-contamination between tests.
Periodically check fasteners, bearings, and drive components for proper operation.
Ensure the cooling fan is unobstructed to maintain thermal stability.
Store the instrument in a clean, dry environment when not in use.
在线联系供应商
Other supplier products
 |
Material Flexural Fatigue Testing Equipment ISO ASTM Compliance | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com The Flex Durability Tester is suitable for testing the rub resistance of vari... |
 |
Block-on-Ring Tribometer Tester (Type 1) | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Ring-on-Block Friction and Wear Tester (Type 1) is designed to evaluate the wear resist... |
 |
Cable Combustion Performance Evaluation Equipment | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Single Cable Vertical Flame Tester is used for the vertical flame propagation... |
 |
Fiber Blend Ratio Test machine | Whats/App: +86 156 1874 6768 Web: standard-groups.com Product Introduction: It is used to measure the resistance value with a certain density un... |
 |
Mask Synthetic Blood Penetration Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Mask Synthetic Blood Penetration Tester is designed to evaluate the resistance of medic... |
Same products
 |
HDPE高速水冷双壁波纹管生产线 | 卖方: Shandong HUASU Plastic Technology Co.,Ltd. | 机头模具采用双流道结构、氮化磨光处理机头，偏壁调整方便快捷，保证内外层壁厚均匀和稳定成型。 最新设计密闭压力水冷冷却结构，冷却充分，多点分布真空系统，效率更高，生产速度更快。 双层在线扩口功... |
 |
PanEVAP & MVR system | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat... |
 |
PanGAP wide gap welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel... |
 |
PanBloc welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac... |
 |
PanBox welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBox welded plate heat exchangerconsists of a laser welded plate pack with optimized corrugated... |
