.

Automatic catheter vacuum leak equipment

Whats/App: +86 156 1874 6768

Web: standard-groups.com

Applications

The catheter vacuum leak tester is a professional device used to detect leaks in medical catheter systems under vacuum conditions. It is mainly used to ensure the sealing and safety of catheters during use and prevent medical accidents caused by leaks. This tester can be widely applied to the leak detection of various medical catheters, such as suction catheters, drainage catheters, anesthesia catheters, endotracheal tubes, etc.

Standards

GB 15812.1 - 2005 :Non - Vascular Intravascular Catheters - Part 1: General Performance Test Methods

GB 8368 :Disposable Infusion Sets

YY 0489 - 2004 :Test Method for Piston Tightness of Disposable Sterile Syringes

Technical Parameters

ParameterSpecification
Measuring Range Usually 0 to -90kPa, which can meet the negative-pressure testing requirements of various catheters
Accuracy Generally reaching level 0.1 to ensure the accuracy of test results
Vacuum Maintenance Performance Equipped with an automatic pressure-holding function to ensure the stability of the vacuum during the test
Test Time Setting range: 1 to 9999 seconds; error ≤ ±1 second
Power Supply Usually 220VAC 50Hz or 120VAC 60Hz, adapting to voltage requirements of different regions
Net Weight Approximately 20kg (varies by model)

Accessoriess

Standard accessories include: specialized connection adapters for different sizes of medical catheters (compatible with various catheter interfaces such as suction tubes and drainage tubes), vacuum-sealed connecting tubing (for connecting the main unit to the vacuum tank), sample fixing clamps (to secure the catheter under test), standard leak calibration components (to ensure the accuracy of the equipment's measurements), operating instructions, and a calibration certificate.

Test Procedures

Open-system catheter: Open the catheter vacuum control device to the release position, turn on the vacuum pump, and adjust the flow rate to the specified value (e.g., 30 L/min).

Closed-system catheter: Remove the pressure gauge, turn on the vacuum control device and vacuum pump, adjust the flow rate to the specified value, then switch the vacuum control device to the closed position, and reattach the pressure gauge. Read and record the residual vacuum value measured on the pressure gauge, which is usually expressed in kPa. For respiratory tract suction catheters, the residual vacuum should not exceed the specified value (e.g., 0.33 kPa or 3.4 cmH₂O).


在线联系供应商

至: Standard International Group (HK) Limited
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

Leak Detection System
Leak Detection System Whats/App: +86 156 1874 6768 Web: standard-groups.com Applications Tightness and leak testing of technical components and devices; Sealing perf...
Bone Plates Four-point Bending Fatigue Tester
Bone Plates Four-point Bending Fatigue Tester Whats/App: +86 156 1874 6768 Web: standard-groups.com Standard YY/T 1503-2016: Chinese standard specifying test methods for bending fatigue prop...
High-Speed Reciprocating Friction and Wear Tester | ASTM G133 Tribometer
High-Speed Reciprocating Friction and Wear Tester | ASTM G133 Tribometer Get a quote: Whats/App: +86 156 1874 6768 Web: standard-groups.com The High-Speed Reciprocating Friction and Wear Tester (Type 02) is designed t...
ISO 14572 Automotive Wire Repeated Bending Tester
ISO 14572 Automotive Wire Repeated Bending Tester Get a quote: Whats/App: +86 156 1874 6768 Web: standard-groups.com The Automotive Wire Repeated Bending Tester is designed to evaluate the durab...
Industrial High-Temperature Vacuum Friction and Wear Tester
Industrial High-Temperature Vacuum Friction and Wear Tester Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards GJB 3032 — Test Method for Friction and Wear of Materials in Vacuum Enviro...
供应产品

Same products

China factory electrode TGYS125 for power station Selection of advanced
China factory electrode TGYS125 for power station Selection of advanced 卖方: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD "China factory electrode TGYS125 for power station Selection of advanced technology, absolutely f...
Laser Chuck
Laser Chuck 卖方: 00000 Laser Chuck Introduce foreign advanced technology and management concept, High precision pro...
Power Pallet Jack For Sale
Power Pallet Jack For Sale 卖方: Jinan Hulk Machinery Co., Ltd Power Pallet Jack For Sale Electric Pallet Truck For Sale As a supplier of power pallet jac...
Multi Directional Forklift For Sale
Multi Directional Forklift For Sale 卖方: Jinan Hulk Machinery Co., Ltd Multi Directional Forklift For Sale Multi Directional Forklift For Sale As a supplier of mu...
Narrow Aisle Forklift For Sale
Narrow Aisle Forklift For Sale 卖方: Jinan Hulk Machinery Co., Ltd Narrow Aisle Forklift For Sale Narrow Aisle Forklift For Sale As a supplier of , we provide...