Tribology test system with adjustable load
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Standards
GB/T 6040-2008 Test Method for Wear Resistance of Metal Surfaces
ASTM D1894 Test Method for Static and Kinetic Coefficients of Friction of Plastic Film and Sheeting
JIS K 7317:2022 Plastics — Film and Sheeting — Determination of Coefficient of Friction
ISO 4649 Rubber and Elastomers — Determination of Abrasion Resistance
ISO 12137-2 Coated Fabrics — Determination of Abrasion Resistance (Martindale Method)
ISO 20502 Fine Ceramics and Coatings — Scratch and Wear Testing
ASTM G99 Test Method for Wear Testing with a Ball-on-Disk Apparatus
ASTM D3702 Test Method for Wear Rate of Materials Using a Rotating Drum Apparatus
Parameters
| Parameter | Specification |
|---|---|
| Sliding speed | 0.1 – 50 mm/s |
| Vertical load range | 10 – 1000 g / 1 – 50 g / 100 – 10.000 g |
| Load sensor capacity | 19.61 N / 0.98 N / 196.1 N |
| Worktable size | 120 × 200 mm |
| Main unit dimensions (Type 1) | W 710 × D 490 × H 710 mm |
| Main unit dimensions (Type 2) | W 1000 × D 520 × H 900 mm |
Features
Servo motor–driven gear and rack system for stable and precise motion control
Simultaneous measurement of friction force and wear displacement in a single test
Three-dimensional wear pattern generation for comprehensive tribological analysis
Multiple test modes, including constant load and continuously variable load
Touch panel interface for intuitive parameter setting and mode switching
High safety design with overload protection and advanced noise suppression circuitry
High signal stability with CMRR ≥130 dB (AC/DC) and NMRR ≥50 dB (AC)
Accessories
(1) Scratch needles
(2) Ball indenters
(3) Vertical gauge
(4) Load variation unit
(5) Set of calibration weights
(6) Power cable
(7) Tool set
(8) Parts box
(9) Operating manual
(10) Tribosoft software package
(11) Friction analysis software
(12) Notebook computer
Optional: Tribo CCD system, heating unit, cooling unit
Test Procedures
Mount the test specimen securely on the worktable.
Select the appropriate contact geometry, such as scratch needle or ball indenter.
Configure test parameters including speed, load range, and test mode via the control interface.
Start the test to apply friction motion under variable or constant vertical load.
Record real-time friction force and displacement data during operation.
Generate three-dimensional wear maps showing the relationship between load, friction force, wear depth, and wear cycles.
Identify critical load values corresponding to wear transitions based on test results.
在线联系供应商
Other supplier products
 |
Autocatalytic Decomposition Temperature Tester with Thermal Insulation，autocatalytic decomposition temperature measurement | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Autocatalytic Decomposition Temperature Tester with Thermal Insulation (Adiabatic SADT ... |
 |
Film Heat Shrinkage Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Applications The film heat shrinkage rate tester is mainly used to test the heat shrinkage... |
 |
Footwear Flexing Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com The finished shoe resistance zigzag tester drives the zigzag part of the finished shoe to z... |
 |
Automotive Seat Three-Station Headrest and Backrest Static Strength Testing Machine，Vehicle seat static load testing rig | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Automotive Seat Three-Station Headrest and Backrest Static Strength Testing Machine is ... |
 |
Photovoltaic Module Backsheet 90-Degree Peel Strength Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Application The tester is suitable for evaluating PV module backsheet adhesion performance... |
Same products
 |
PanEVAP & MVR system | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat... |
 |
PanGAP wide gap welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel... |
 |
PanBloc welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac... |
 |
PanBox welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBox welded plate heat exchangerconsists of a laser welded plate pack with optimized corrugated... |
 |
PanPHE gasketed plate heat exchangers | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanPHE gasketed plate heat exchangersare designed with easy access for regular servicing and for ... |
