.

ISO compliant filter media test system

Get a quote:

Whats/App: +86 156 1874 6768

Web: standard-groups.com

Test System for multiple parameter testing at filter media, space-saving design by vertical-orientated flow channel. Performance of filter media is essentially defined by parameters such as differential pressure, gravimetric filtration efficiency and dust holding capacity.This test bench has been designed as universal testing equipment. It combines a simple and robust setup with a manual and therefore cost efficient handling and operation. Because of its vertical test channel setup it is especially suitable for the testing of filter media according to ISO 5011.

Features

Reliable timesaving testing of gravimetric filter efficiency, dust holding capacity, differential pressure and fractional filtration efficiencyholders for test filter and backup filter separately removable, weighable without filter removal

Backup filter for protection of the flow rate unit in case of a filter breakthrough

Integrated Solid Aerosol Generator SAG 410 for feeding rates from approx. 1.5 - 20 g/h

Principle

- Flow rate unit: injector pump with a set of critical nozzles to adjust different flow rates

- Intake test air is directed through a special intake section for homogenous mixing with the test aerosol

- Test filter holding manually operable

- Solid aerosol generator exchangeable by different models of the series

- Control of the Solid Aerosol Generator integrated to the test rig

- Test dust dispersion by using an injector nozzle

- Suitable especially for test dusts ISO 12103-2 A2/A4

Standards

GB/T 6165 — High Efficiency Air Filters — Performance Test Methods

GB 2626 — Respiratory Protection — Non-powered Air-Purifying Particle Respirators

EN 13274-7 — Respiratory Protective Devices — Test Methods — Part 7: Determination of Particle Filter Penetration

ISO 5011 — Inlet Air Cleaning Equipment for Internal Combustion Engines and Compressors — Performance Testing

ISO 29463-3 — High-Efficiency Filters and Filter Media for Removing Particulate Matter in Air — Part 3: Testing Flat Sheet Filter Media

ISO 29463-5 — High-Efficiency Filters and Filter Media for Removing Particulate Matter in Air — Part 5: Test Method for Filter Elements

Technical data

ParameterUnitValue
Test flow rate m³/h 1.5-18
Measuring range, differential pressure Pa 5000
Compressed air supply (operating gas/air) bar 6
Power supply 110 … 230 VAC, 50/60 Hz
Operating medium (aerosol) DEHS, ISO 12103-1 A2

在线联系供应商

至: Standard International Group (HK) Limited
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

Cell thickness gauge丨Cell thickness device
Cell thickness gauge丨Cell thickness device Whats/App: +86 156 1874 6768 Web: standard-groups.com Standard ASTM E83: Standard Test Method for Verification of Linear Displacement Measurin...
Hypodermic needle toughness tester instrument
Hypodermic needle toughness tester instrument Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards The device meets and supports testing according to the following international a...
Walk In Salt Spray Test Chamber ISO 9227 Manufacturer
Walk In Salt Spray Test Chamber ISO 9227 Manufacturer Get a quote: Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards GMW 14872 Simulating the Corrosion Resistance of Automotive Compon...
Battery short-circuit tester丨Battery short-circuit chamber
Battery short-circuit tester丨Battery short-circuit chamber Whats/App: +86 156 1874 6768 Web: standard-groups.com Product introduction The device is designed based on a variety of battery short-circuit te...
Model Coin-cell Swelling System
Model Coin-cell Swelling System Whats/App: +86 156 1874 6768 Web: standard-groups.com The Model Coin-Cell Swelling System is designed for in-situ measurement of thickness and vo...
供应产品

Same products

不锈钢焊剂芯焊丝 E308T1-1 E308HT1-1 E308LT1-1 用于304不锈钢焊接的气保焊丝
不锈钢焊剂芯焊丝 E308T1-1 E308HT1-1 E308LT1-1 用于304不锈钢焊接的气保焊丝 卖方: 863048 产品描述 不锈钢药芯焊丝 E308T1-1 E308HT1-1 E308LT1-1,FCAW不锈钢焊丝,AWS A5.22药芯焊丝,304不锈钢焊接耗材,低碳不锈钢药芯焊丝,耐高温不锈钢焊丝,...
E317LT1-1 焊剂芯线 CO2 不锈钢焊剂含量70% 直径1.0/1.2/1.6mm OEM定制 1200℃熔点
E317LT1-1 焊剂芯线 CO2 不锈钢焊剂含量70% 直径1.0/1.2/1.6mm OEM定制 1200℃熔点 卖方: 863048 迅卓不锈钢药心焊丝 E317LT1-1 分类: Сварочная проволока E317LT1-1 с флюсом, нержавеющая сталь, 70% содержан...
Mini Jewelry Laser Repair System – 60W to 400W Precision Welding
Mini Jewelry Laser Repair System – 60W to 400W Precision Welding 卖方: Beijing JCZ Technology Co., Ltd The Mini Jewelry Laser Welding Machineis an advanced mini laser welding system engineered for pre...
Portable Backpack Laser Cleaning Machine – Lightweight, Efficient Rust & Paint Removal
Portable Backpack Laser Cleaning Machine – Lightweight, Efficient Rust & Paint Removal 卖方: Beijing JCZ Technology Co., Ltd TheHCP-M SeriesBackpack Laser Cleaning Machinefeatures a compact pulsed fiber laser system, desig...
Suitcase Pulsed Laser Cleaning Machine | Ultra-Portable Handheld Fiber Laser Cleaner
Suitcase Pulsed Laser Cleaning Machine | Ultra-Portable Handheld Fiber Laser Cleaner 卖方: Beijing JCZ Technology Co., Ltd The Suitcase Pulsed Laser Cleaning Machineis an ultra-portable, high-precision handheld fiber las...