ASTM D2061 Zipper Cycling Tester | Zipper Endurance Test Equipment Supplier

Get a quote：

Whats/App: +86 156 1874 6768

Web: standard-groups.com

Features

1. The counter adopts LCD display, 0~ 999.999 continuous adjustable;

2. Adjust zipper stroke according to different standard;

3. Automatic stop and alarm for 10S upon reaching the set number of times;

5. One set each of specially manufactured large and small zipper head fixtures, for the convenience to used zipper heads in different specification.

6. The positioning block ensures that the transverse pull clamp maintains tranversely tight at 10° at the beginning of clamping.

7.It has point adjustment function and fine tuning handwheel to facilitate the adjustion of installation position;

8.The zipper clamp is made of stainless steel

Technical Parameters

Items	Parameters
Reciprocating speed	30 double times/min
Reciprocating stoke	75mm
Horizontal clamping device width	25mm
Vertical clamping device width	10mm
Two clamping device distance	6.35mm
Friction head size	20mm*20mm
Surface friction head	Dead weight:200g
Round-trip distance	Low load 120mm; High load 150mm

Test Procedures

1. Roughly fix the zipper end (bottom stop) to point A (pull tab facing inwards);

2. Fix the pull tab to the pull tab clamp;

3. Fix the zipper front end (top stop) to points D and E;

4. Loosen point A, pull the zipper end upwards so that the fixing pin falls into the middle of the balance plate hole, then clamp point A (at this point, visually check that points D and E are on the same horizontal line);

5. Loosen the horizontal clamps B and C, allowing the fabric tape on both sides of the zipper to be placed into clamps B and C and clamped, with the clamp opening approximately 5mm from the tooth. At this point, all five fixing points are secured;

6. Adjust the zipper tester to its upper limit, loosen the pull tab clamp, and visually check if the zipper remains straight. If not, readjust until all clamping is complete;

7. For zippers of different specifications, apply load to their horizontal and vertical directions according to the specified requirements.

Other supplier products

	Walk-in High-Temperature Aging Chamber IEC 60068-2-2 Manufacturer	Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards GJB150.3 (ML-STD-810D) High Temperature Test Method GJB150.4 (MIL...
	Salt Spray Testing Machine	Whats/App: +86 156 1874 6768 Web: standard-groups.com Meet the standard: GB/T2423.17 Product Introduction: This type of salt spray test chambe...
	Battery Slurry Resistance Tester丨Battery Slurry Resistance Test Mechine	Whats/App: +86 156 1874 6768 Web: standard-groups.com Standard ASTM B193: Standard Test Method for Resistivity of Electrical Conductor Materia...
	BS 5131 heel fatigue tester	Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Applications The tester is suitable for evaluating heel durability in: (1) ...
	Fabric Far Infrared Emissivity Mapping Device	Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com The Textile Far-Infrared Emissivity Tester is a precision instrument designed...

供应产品

Same products

	PanEVAP & MVR system	卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd	A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat...
	PanGAP wide gap welded plate heat exchanger	卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd	PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel...
	PanBloc welded plate heat exchanger	卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd	PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac...
	PanBox welded plate heat exchanger	卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd	PanBox welded plate heat exchangerconsists of a laser welded plate pack with optimized corrugated...
	PanPHE gasketed plate heat exchangers	卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd	PanPHE gasketed plate heat exchangersare designed with easy access for regular servicing and for ...