Gel sealing HEPA /ULPA filter
Gel Seal filter constructed with a built-in channel in the filter frame contains a non- flowing,non-hardening urethane gel sealant. Designed for framing systems and housing equipped with a “knife edge” seal. The knife edge inserts and submerges into the gel seal on the filter to prevent leakage Gel Seal are available in cell side (filter frame) depths of 3 1/8” (80mm). Reverse Gel Seal filters constructed with the built-in gel channel located at the back of the upstream side of the filter. Placing the channel in this position enables the filter to fit up into the housing to save space. Access to the filter is from the room side of the unit. Designed for housings and ducted modules equipped with a “knife edge” seal. The knife edge inserts and submerges into the gel seal on the filter to prevent leakage. Excellent replacement filter for permanently installed ducted ceiling modules. Reverse Gel Seal are available in cell side (filter frame) depths of 3”(75mm) and 3 7/8” (93mm)
Gel-seal Mini-pleatHEPA filters have a tank filled with gel, which is reliable and particularly suitable for workplaces for DOP test and leakage detection on site. This filter is mainly installed at the end of 0.3μm clean rooms and purifying equipment in the pharmaceutical industry to control particulates larger than 0.3μm and microorganisms in the clean room or equipment operating areas. Gel seal mini-pleat HEPA filters have side seal type and top seal type for options.
Specifications
Frame: Anodized aluminum
Type:Pleated panel
Media: Ultra fine glass fiber
Grille:Expanded metal painted (Both side)
Separator :Hot melt
Sealant: Urethane gel sealant
EN1822: H13 / H14 / U15
Efficiency:99.99%,99.999% at 0.3μm, 99.9995% at 0.12μm (MPPS) Max temperature: 70℃ Max relative humidity: 100%
Technical Data
Top gel seal type
Model |
Dimensions W×L×D(mm) |
Rated Airflow (m³/h) |
Initial P.D.(Pa) *Proposed value |
||
H4BX6-105L2-WB2 |
370×370×105 |
500 |
H13 |
H14 |
U15 |
H4PT7-105L2-WB2 |
510×510×105 |
1000 |
200 |
210 |
249 |
H4BX8-105L2-WB2 |
610×610×105 |
1500 |
|||
H4PT9-105L2-WB2 |
510×1020×105 |
2000 |
Side gel seal type
Model |
Dimensions W×L×D(mm) |
Rated Airflow (m³/h) |
Initial P.D.(Pa) *Proposed value |
||
H4BX6-93L2-WB2 |
370×370×93 |
500 |
H13 |
H14 |
U15 |
H4PT7-93L2-WB2 |
510×510×93 |
1000 |
200 |
210 |
249 |
H4BX8-93L2-WB2 |
610×610×93 |
1500 |
|||
H4PT9-93L2-WB2 |
510×1020×93 |
2000 |
Advantages
1.Two side grille
2.Compact Mini pleat design saves energy,ensures low resistance to airflow
3.Lightweight structure
4.Gel sealing,much better sealing performance.
Applications
It is widely used in clean rooms with high requirements, large area vertical laminar flow, 100-level laminar flow hood, biological safety cabinet, biotechnology, laboratory, sterile room, pharmaceutical factory, research institute and other clean rooms with high clean requirements.
在线联系供应商
Other supplier products
Gel sealing HEPA /ULPA filter | Gel Seal filter constructed with a built-in channel in the filter frame contains a non- flowing,non-hardening urethane gel sealant. Designed for fr... | |
Aluminium Terminal Hepa Box | SNYLI's Aluminium terminal HEPA box is a good choice for the air filtration system in clean rooms of class 1000.It adopts indoor replace design,the... | |
Washable Pocket Air Filter | Pocket filters, also referred to as bag filters,pocket filters are constructed of a plastic or galvanized steel frame and contain fiberglass or syn... | |
Compact Hepa Filter | Compact HEPA filter is also called high air flow V shape HEPA filter/V cell HEPA filter/ W-type HEPA filter. It is suitable for use in research and... | |
Rigid Pocket Air Filters | Self-supported pocket filters are distinguished by their self-supporting design, which keeps the filter open in a V-shape so that the entire filter... |
Same products
Filton Filter Air Filter LW-1242 | 卖方: Filton Tech (Shanghai) Co., Ltd | Filton Filter Air Filter LW-1242 Filton LW-1242Air Filter for X3 (F25) xDrive 28 i Black PP rou... | |
Two-Stage Screw Air Compressor | 卖方: Auliss Henan Intelligent Technology Co., ltd. | By employing two-stage compression, an intermediate cooler can be introduced between the stages. ... | |
Silicone Ice Cream Cake Molds | 卖方: Yangjiang Bohao ENTERPRISE CO., LTD | There are 6pcs of the silicone cake ice cream mould, enough quantity to meet your various needs. ... | |
Clean Room Hepa Fan Filter Unit FFU | 卖方: Snyli Environmental Technology (Shandong) Co., Ltd. | Clean room HEPA fan filter unit (HEPA FFU) are mostly used in Class 10 and Class 100 clean rooms.... | |
High Temperature Resistance HEPA Filter | 卖方: Snyli Environmental Technology (Shandong) Co., Ltd. | Product Overview High Temperature Resistance HEPA Filter is especially designed to remove airbor... |