.

KBA-AJ Linear Bearing Pillow Block 2019

ISUTAMI KBA-AJ adjustment linear bearing pillow block, also known as KBA-AJ clearance-adjusting linear bearing unit,linear bearing pillow block europe,KBA-AJ clearance-adjusting linear slide unit or KBA-AJ clearance-adjusting linear case housing (unit), is a suitable for linear motion products in the European market. AJ is an abbreviation for adjustment. This model consists of an adjustable aluminum housing with 4 fixing holes and a matching KB-AJ adjustment linear bearing. The unit has a screw and screw hole for adjusting the aluminum casing. There are also two rubber seals (UU) at both ends of the linear bearing to prevent debris or ball bearing contamination. In addition, the aluminum housing is used because it is small and light, and has strong corrosion resistance.

KBA-AJ Linear Bearing Pillow Block Features

The KBA-AJ clearance-adjustable linear bearing pillow block is a single-length European metric version, with adjustable clearance. The KB-AJ adjustment linear bearing is mounted inside the housing, it is easier to install on a linear shaft because of its lightly adjustable characteristics, saving time. The advantages of the bushing with clearance also include less tilt or friction, less wear over time, and better machining features.

If you are manufacturing CNC milling machines, milling machines or lathes that require precise linear motion, it is a perfect solution to install this aluminum linear bearing housing with KBA-AJ linear bearings. Aluminum case housing size range: length (L) ranges 30-122mm; width (W) ranges 34-132mm; height (F) ranges 22-144; minimum size item KBA8 combination size is 30*34*22mm, maximum size item SMA60, the combined size is 122*132*144mm and all the product size error is between±0.02mm. These data are the same as KBA standard linear bearing pillow block. The aluminum housing has four CNC drilled holes, threaded holes and countersunk holes of the same size M4-M12, which can be easily and safely mounted to almost any linear motion system.

A typical CNC system consists of a linear shaft of matching diameter, ranging from 8 to 60 mm in diameter, mounted on both ends of the shaft by two end supports, and the bearing housing with adjustment linear bearings runs straight along the shaft. Most CNC machines have two such components mounted side-by-side, using a housing as a stand to support the mobile platform. The housing can be mounted from above or below, making it easy to install into the intended system. Positioning and accuracy enhancement are facilitated by being used as a side aspect of the datum. The extruded aluminum housing is subjected to sufficient extrusion and heat treatment to create a compact, lightweight and precision product.

As one of the most professional ball bearing manufacturers in china, ISUTAMI is committed to providing customers with the best possible quality bearing products at the most reasonable price. If you want to know more details or want a quotation, just feel free to contact us!



在线联系供应商

至: NINGBO ISUTAMI BEARING CO.,LTD.
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

Long Pilot Pattern Square Flange Linear Bearing LMKP-L 2019
Long Pilot Pattern Square Flange Linear Bearing LMKP-L 2019 ISUTAMI LMKP-L long pilot pattern square flange linear bearing, also called LMKP-L long pilot pattern square flange linear ball bearing or LMKP-L l...
Standard Linear Bearing SW
Standard Linear Bearing SW ISUTAMI SW standard linear bearings, also known as SW standard linear ball bearings or SW standard linear bushing bearings. SW is the imperial seri...
Plastic Mounted Bearing 2019
Plastic Mounted Bearing 2019 ISUTAMI plastic mounted bearing adopts stainless steel bearing and engineering plastic base. Various engineering plastic series of ISUTAMI, such as...
Long Square Flange Linear Bearing KBK-L 2019
Long Square Flange Linear Bearing KBK-L 2019 ISUTAMI KBK-L long square flange linear bearings, also known as KBK-L long square flange linear ball bearings or KBK-L long square flange linear b...
KBA-AJ Linear Bearing Pillow Block 2019
KBA-AJ Linear Bearing Pillow Block 2019 ISUTAMI KBA-AJ adjustment linear bearing pillow block, also known as KBA-AJ clearance-adjusting linear bearing unit,linear bearing pillow block eur...
供应产品

Same products

单螺杆挤出机齿轮箱使用 M6CT1452A2E 14x52x151mm
单螺杆挤出机齿轮箱使用 M6CT1452A2E 14x52x151mm 卖方: JinHang Precision Bearing Co.,LTD 推力圆柱滚子轴承M6CT1452A2E,尺寸14x52x151mm,内径:14mm,外径:52mm,总高:151mm串联轴承 基本尺寸单位(mm) 基本额定载荷单位(千牛)内径 外径 高度 Cr...
推力圆柱滚子轴承M6CT1242E,尺寸12x42x125.7mm,内径:12mm,外径:42mm,总高:125.7mm 串联轴承 基本尺寸单位(mm) 基本额定载荷 单位(千牛) 内径 外径 高度 Cr Cor M6CT1242E 12 42 125.7 154 534
推力圆柱滚子轴承M6CT1242E,尺寸12x42x125.7mm,内径:12mm,外径:42mm,总高:125.7mm 串联轴承 基本尺寸单位(mm) 基本额定载荷 单位(千牛) 内径 外径 高度 Cr Cor M6CT1242E 12 42 125.7 154 534 卖方: JinHang Precision Bearing Co.,LTD 推力圆柱滚子轴承M6CT1242E,尺寸12x42x125.7mm,内径:12mm,外径:42mm,总高:125.7mm串联轴承 基本尺寸单位(mm) 基本额定载荷单位(千牛)内径 外径 高度 ...
大型齿轮箱中的串联轴承 M6CT630 6x30x89mm 用于塑料挤出
大型齿轮箱中的串联轴承 M6CT630 6x30x89mm 用于塑料挤出 卖方: JinHang Precision Bearing Co.,LTD 推力圆柱滚子轴承M6CT630,尺寸6x30x89mm,内径:6mm,外径:30mm,总高:89mm串联轴承 基本尺寸单位(mm) 基本额定载荷单位(千牛)内径 外径 高度 Cr CorM6CT...
摩擦焊机使用串联滚子轴承 M6CT537 5x37x117mm摩擦焊机使用串联滚子轴承 M6CT537 5x37x117mm
摩擦焊机使用串联滚子轴承 M6CT537 5x37x117mm摩擦焊机使用串联滚子轴承 M6CT537 5x37x117mm 卖方: JinHang Precision Bearing Co.,LTD 推力圆柱滚子轴承M6CT537,尺寸5x27x78mm,内径:5mm,外径:37mm,总高:117mm串联轴承 基本尺寸单位(mm) 基本额定载荷单位(千牛)内径 外径 高度 Cr CorM6C...
深孔钻设备用推力滚子轴承M6CT527 5x27x78mm
深孔钻设备用推力滚子轴承M6CT527 5x27x78mm 卖方: JinHang Precision Bearing Co.,LTD 推力圆柱滚子轴承M6CT527,尺寸5x27x78mm,内径:5mm,外径:27mm,总高:78mm串联轴承 基本尺寸单位(mm) 基本额定载荷单位(千牛)内径 外径 高度 Cr CorM6CT...