Auto Bumper Mould
Auto Bumper Mould
The front and rear bumpers of the car are made of plastic, which not only maintains the protection function, but also has the characteristics of harmony and unity with the body shape, lightweight, and low fuel consumption. The plastic front moulding bumperconsists of three parts, namely the outer panel, the buffer material, and the cross member. The raw materials of the outer plate and the buffer material are all plastic, the beam is stamped into a U-shaped groove from a cold-rolled sheet, and the thickness of the cold-rolled sheet is about 1.5 mm. There are generally two types of materials used in bumper mold: polyester and polypropylene, and the molding process is generally injection moulding.
Bumper Molding for Cars
Green Vitality is a professional automobile mold manufacturer and has rich experience in automobile bumper mold manufacturing.
The Auto Bumper Mold designed by Green Vitality not only has the ability to reduce the injury of drivers and passengers during high-speed impact but also has the ability to protect pedestrians. Green Vitality uses an internal parting structure design for the bumper mold. Compared with the traditional outer parting structure design, the inner parting design has higher requirements on the strength of the mold. Correspondingly, the design concept of the bumper mold made by the internal parting structure is more advanced.
Basic Information for Auto Bumper Mould
Auto Bumper Mould Specification
Description |
Auto Bumper Mold |
Plastic material |
PP |
Mould cavity&core steel |
P20,2738,718H,738H,NAK80,SKD61,E420,etc. |
Mould weight (T) |
10T |
Feeding System |
Cold runner/ Hot runner |
Hot runner brand |
YUDO, HUSKYFISA, HASCO, MOLD-MASTER |
Nos of Cavity |
1*1 |
Manufacture time (day) |
120 days |
Mould life |
≥500000 |
Packing |
Vacuum+plywood wooden box |
Green Vitality Can Offer You with Auto Bumper Mould
Analysis: Through the analysis of material properties and product feasibility, such as wall thickness, deformation, plastic feeding position, etc., potential problems can be predicted in advance.
Communication: Maintain close communication with customers, and understand the functional requirements and precautions of products from the perspective of customers, such as requirements for weld lines, requirements for appearance, etc.
Design: Strict design review system and checklist check. Before design, during the design of the scheme structure discussion meeting, the designer will check himself according to the checklist; after design, review together with the manufacturing department.
Quality inspection: Quality inspection of each link to discover mass production problems in advance.
Project management: Each project is equipped with a project manager, who strictly follows the schedule to control the project cycle, and provides weekly progress reports and mold photos for each project so that customers can keep abreast of the status.
Service: From mold design to continuous mass production of products, we provide full life cycle service support.
After-sales service: continuous after-sales follow-up service, proactively providing mass production and processing technical consulting services.
Technical support: In the mass production process, if there is any problem with the mold, technical support will be provided unconditionally.
As a plastic injection factory, we will do our best to meet all the needs of customers.
在线联系供应商
Other supplier products
Car Seat Mould for Kids | Child safety seats are seats specially designed to protect children from injury or death in a collision. The main structure of the child safety sea... | |
Game Controller Mold | To increase the production efficiency, we need optimize the mold cooling system to shorten the cycle time. As a result, machining cost and time wil... | |
Keyboard Mould | Mainly electronic molds we make are electronic housing mold, electronic components mold, electronic dashboard cover mold, computer keyboard mold, c... | |
Soap Box Mold | Plastic soap is also made by plastic injectionmold, as it need dimensional stability, good apperance and good color performance, so we have to choo... | |
Auto Part Mold | With the vigorous development of the automotive industry, plastic auto part mold is also developing rapidly. 90% of auto parts are produced by inje... |
Same products
Double Color Mold For Car Head Lighting Two-Shot Mold | 卖方: Taizhou Toolsong Mould Co., Ltd. | Double Color Mold For Car Head Lighting Two-Shot Mold Double color lens mold for car head lighti... | |
Front Lamp LeFront Lamp Lens Injection headlight moldns Injection headlight mold | 卖方: Taizhou Toolsong Mould Co., Ltd. | Front Lamp Lens Injection headlight mold The headlamp lens has a high standard in its aesthetics... | |
Front Lamp LeFront Lamp Lens Injection headlight moldns Injection headlight mold | 卖方: Taizhou Toolsong Mould Co., Ltd. | Front Lamp Lens Injection headlight mold The headlamp lens has a high standard in its aesthetics... | |
Plastic Pallet Mould | 卖方: Zhejiang Huaqi Information Technology Co., LTD | Our plastic pallet moulds are designed with sustainability in mind. The pallets produced are made... | |
Single Face Forklift Pallet Mould | 卖方: Zhejiang Huaqi Information Technology Co., LTD | Single Face Forklift Pallet Mould Usage: Plastic pallets are commonly used for the commercializat... |