Car Light Mould
Car Light Mould
The car headlight mouldplays a vital role in illuminating vehicles, serving as the eyes of cars. It encompasses all the lighting systems employed in automobiles. The design and production of auto lamp mouldnecessitate meticulous attention due to the exacting requirements of automobile light appearance. Transparent and electroplated components constitute several critical parts of these lights. The lamp itself stands out as the most demanding element in the car's aesthetic. The front and rear headlights represent the primary illumination sources for most cars. Lighting configurations differ across various car series, while even within the same series, variations exist based on height configuration. The key components comprising the front and rear lights of a car include left and right lenses, decorative frames, lamp housings, reflectors, among others.
Car Light Mould Appearance Requirements
Lens (Material: Transparent PC): Steel CAV / COR: NAK80 or S136H (HRC33-37), the hardness of the cavity and core is staggered. The product is highly polished, can't pass the whetstone, save the mold to 1000# sandpaper and then polish.
The decorative frame ( Material PBT ): Mold Steel: CAV: NAK80 or S136H (HRC33-37), COR: forged steel HRC31-35, the product is highly polished, can not pass whetstone save the mold to 1000# sandpaper and then polish. The cavity side ( reflective surface) can not be welded.
Reflector (Material BMC): The cavity and core are made of 8407 steel (to achieve a high polishing effect), the cavity steel is HRC46-50, and the core steel is HRC44-48. The cavity side (reflecting surface) is high polished, and can not pass the whetstone, save the mold to 1000# sandpaper and then polish, the core side is generally 600# polished.
Car light Mould Basic Information
Auto Lamp Mould Specification
|
Description |
Automotive lights Injection Mold |
|
Mold base |
LKM; HASCO; DME, etc |
|
Mold cavity&core steel |
P20,2738,718H,738H,NAK80,SKD61,E420,etc. |
|
Nos of Cavity |
Single or Multi |
|
Finish |
Anodized,Polish,Silk-screen,Painting,etc |
|
Hot runner brand |
YUDO, HUSKYFISA, HASCO, MOLD-MASTER |
|
Product material |
ABS,PP,PE,POM,PMMA,PC etc |
|
Mold life |
100k-500k shots |
|
Manufacture time (day) |
30-45 days |
|
Packing |
Vacuum+plywood wooden box |
|
Packing |
Vacuum+plywood wooden box |
Car Light Mould Technology Summary
Plastic features: transparent color, high requirements for the appearance surface, no spots/gate/marks, no bubbles/ fog halo/shrinkage mark/ welding lines, and other forming defects.
In view of the plastic color transparent, the use of an ordinary runner can avoid the plastic color difference, improve transparency, coupled with the plastic surface is not allowed to have gate marks, so use the side gate gating system.
Car light mould adopts the combined cooling system of "vertical cooling water pipe, inclined cooling lines, and splice water well", and the waterway is arranged along the cavity, effectively ensuring the precision of the plastic parts and the labor productivity of the mold. The plastic parts are ejected out by an ejector block, which is not only stable but also leaves no influence on the appearance of the product.
In the molding of transparent mold, the design of the exhaust system is very important, such as poor exhaust, will seriously affect the quality of plastic parts, in view of the product material for PC, exhaust front-end design for 0.02mm, around the product according to CAE analysis of reasonable design exhaust, reduce the bubble or air trapping caused by local burns and other problems during plastic injectionmolding.
Now the price of custom plastic injection moldis reasonable, if you have needs, please contact us.
在线联系供应商
Other supplier products
 |
Plastic Gear Mold | Injection molded plastic gearsis one of the most widely used transmission mechanisms in the field of instruments & meters, timers, reducers, ca... |
 |
Automotive Air Grille Mold | Automotive Air Grille Mold The car grille is a mesh part with a grid in the front part of the car. The front grille of the vehicle is located betw... |
 |
Home Appliance Mould | GV Mold has rich experience in home appliance molds (such as television, refrigerators, fans, washing machines, air conditioners, and various smart... |
 |
Fan Mold | If the weight of each fan blade is not balanced, large vibration, high noise, and large wear of the rotating shaft will occur during high-speed rot... |
 |
Home Appliance Mould | GV Mold has rich experience in home appliance molds (such as television, refrigerators, fans, washing machines, air conditioners, and various smart... |
Same products
 |
Backrest Legless Chair mould | 卖方: 869472 | TAIZHOU HUANGYAN SHINE MOULD CO., LTD. specializes in plastic injection mould manufacturing, incl... |
 |
Cosmetic Bottle Mold(Mould) | 卖方: Taizhou Qihong Mold Co., Ltd. | Taizhou Qihong Mold Co., Ltd. specializes in manufacturing Cosmetic Bottle Mold (Mould) solutions... |
 |
steel moulds for precast concrete | 卖方: Sino Mould (Hubei) Co.,Ltd | steel moulds for precast concrete What Are Steel Moulds & Their Role for precast concre... |
 |
new jersey barrier moulds | 卖方: Sino Mould (Hubei) Co.,Ltd | new jersey barrier moulds Barrier Types & Custom Configurations Single-sided parapet bl... |
 |
culvert moulds | 卖方: Sino Mould (Hubei) Co.,Ltd | culvert moulds Structural & Configuration Types By Mold Configuration: Horizontal-type ... |
