KCB External Gear Pump
Honghai KCB External Gear Pump
This Series of external gear pump, is mainly consists of gear, eccentric shaft, pump body, safe valve and sealing. Through heat treatment, the gear achieve a higer strength and hardness, together with the shaft, are installed into a changeable axle housing and rotate.
Brief Introduction
All the related parts will be automatically lubricated when the gear pump is working.
KCB external gear pump is mainly used for transferring lubricating oil in the lubrication system of the mechanical equipment, whose transferring viscosity is 5×10-6～1.5×10-3m2/s（5-1500cSt）, temperature below 300℃.
This external gear pump is able to transfer those like oil, beverage and noncorrosive liquid without lubricity. With copper gear, it can be used to transfer those liquid like gas and benzene.
This series external gear pump is equipped with normal motor, which can be replaced with fire proof motor according to customers’ requirement.
Material: 304.316.316L stainless steel.
Application
The external gear pumps can be used in higher sanitary conditions, like pharmaceutical industry, food industry, etc., can also be used in those area with weak causticity, like precision chemistry, cosmetic industry, printing and dyeing industry, brewing industry as well.
The external gear pump can be used as transfer pump and blower pump in oil transfer system; The external gear pump can be used as transfer pump, fuel pump and blower pump in the fuel system; The external gear pump can be used as lubrication pump in the general industrial fields.
Features
This Series of external gear pump from Honghai Pump, is mainly consists of gear, eccentric shaft, pump body, safe valve and sealing. Through heat treatment, the gear achieve a higer strength and hardness, together with the shaft, are installed into a changeable axle housing and rotate. All the related parts will be automatically lubricated when the gear pump is working.
Within the external gear pump, there are well and careful designed oil drainage path and oil circuit groove, which achieves the smallest torque resistance for the gear. In this way, the external gear pump is high efficient with low abrasion and low bearing loads.
Honghai external gear pump is protected with safe relief valve in case of overloads. The Total reflux pressure of the relief valve is 1.5 times of the rated relief pressure, which can be adjusted according the actual applications. Be attention, the safe valve can’t be used as relief valve all the time, if necessary, a relief valve can be especially installed in the path.
The direction of rotation is clockwise viewed from coupling end.
As for technical data, please check our website for detailed information.
在线联系供应商
Other supplier products
 |
3RP Series Rotary Lobe Pump | 3RP Series Rotary Lobe Pump Outstanding self-priming ability high efficiency long life Brief Introduction It applies to delivering suspension liq... |
 |
AY series single two-stage centrifugal oil pump | Honghai AY series single two-stage centrifugal oil pump High Effective Energy Saving AY two-stage centrifugal pump Advanced technology High effici... |
 |
2W W twin screw pump | 2W W twin screw pump Smooth conveying liquid 2. No pulse 3. No stirring 4. Small vibration 5. Low noise. 1, conveying liquid stationary, no pulse,... |
 |
ZYB Series Booster Fuel Pump | ZYB Series Booster Fuel Pump Advanced structure small volume big capacity low noise long service life Honghai ZYB series booster fuel gear pump is... |
 |
Honghai Thermal oil pump | Brief Introduction This series of thermal oil pump is produced on the basis of air-cooled hot oil pump, which is able to resist higher temperature.... |
Same products
 |
OEM 定制卧式 LB 系列冰箱润滑油齿轮泵 | 卖方: 河北盛辉泵业 | LB 系列冷冻机齿轮泵适用于输送粘度在 200°E （1500mpa.s）以下，无固体颗粒杂质，温度不高于 120° 的各种机械油、透平油及其它性质相近，性能平稳的介质。该设备结... |
 |
OEM 定制卧式 LB 系列冰箱润滑油齿轮泵 | 卖方: 河北盛辉泵业 | LB 系列冷冻机齿轮泵适用于输送粘度在 200°E （1500mpa.s）以下，无固体颗粒杂质，温度不高于 120° 的各种机械油、透平油及其它性质相近，性能平稳的介质。该设备结... |
 |
新款 YHCB 系列可移动卧式圆弧齿轮输油泵 | 卖方: 河北盛辉泵业 | YHCB 系列圆弧齿轮泵专为输送高粘度流体（如油、树脂和化学溶液）而设计。这些泵广泛应用于需要精确可靠地处理流体的行业，包括石化、食品加工和制药行业。它们设计坚固、流量控制精确、易于维护，是需要... |
 |
便携式WCB系列不锈钢高粘度柴油齿轮输送泵 | 卖方: 河北盛辉泵业 | WCB齿轮油泵重量轻，体积小，携带移动方便。结构采用联轴器与介质隔离，联轴器单独润滑，齿轮采用合金钢，采用特殊的热加工工艺，表面硬度可达HRC60以上，耐磨性强，使用寿命长。与其它普通型泵相比，... |
 |
库存 ZYB 系列不锈钢废重油输送高压齿轮泵 | 卖方: 河北盛辉泵业 | ZYB系列废油泵用于抽送温度不高于200℃，粘度不大于150mm2/S含有非金属杂质的重油、柴油、煤焦油及粮油、化工、建材、日化等产品中的杂质。本机采用自密封润滑设计，间隙自动调整结构，零件采用... |
