Canned motor pump
Canned motor pump
Explosion-proof canned electric pump is a leak-free pump consisting of a canned motor and a pump. The canned pumphas absolutely no leakage. Under negative pressure in the pump, outside air will not be sucked in, which is especially suitable for vacuum system operation; For high pressure, high melting point, high and low temperature media. The canned motor pump is compact in structure, small in size and light in weight; it has no cooling fan, low noise, wide range of use, reliable operation, and can provide a relatively good working environment.
Parameters
Capacity: Q up to 1200m3/hHead: H up to 200mFluid Temp. Range: -200 to 450°C
ZGPV Canned motor pumpFeatures
The stator and the rotor are separated by non-magnetic corrosion-resistant thin-walled sleeves. The rotor is supported by the front and rear bearings and immersed in the conveying medium. Therefore, no type of dynamic seal is required to prevent outward leakage of the conveyed medium.
Totally closed: there is no dynamic seal on the structure, only the static seal is on the casing of the pump, so it can be completely leak-free.
The rotor and the stator each have a shielding sleeve so that the motor rotor and the stator are not in contact with the material. Even if the shielding sleeve is broken, there is no danger of external leakage.
Smooth, low noise, no need to add lubricant: Because there is no rolling bearing and motor fan, no need to add lubricant, and the noise is low.
MOC
Metallic: SS304/316316L; Hastelloy C4, C276 etc;Insulation: H, C, Super-C, etcGasket: PTFE, Metal Spiral Wound etc
Configuration
Flange Standard: ANSI, ASME, HG, DIN, JIS, GB, SH etc (2 times API nozzle loads)
Application
Be used in petroleum, chemical, medicine, Textile, nuclear power, military industry, shipbuilding and city water supply and drainage, fire-fighting pressurized, high-rise buildings pressurized water supply.
motor pump factory: Sichuan Zigong Pump & Valve Co., Ltd.
Visit company website:
在线联系供应商
Other supplier products
|
|
Canned motor pump | Canned motor pump Explosion-proof canned electric pump is a leak-free pump consisting of a canned motor and a pump. The canned pumphas absolutely n... |
 |
Three screw pump | Three screw pump The 3GR type three-screw pumpis a rotor type positive displacement pump. The principle is that the primary and secondary moving s... |
 |
不锈钢SS316L耐腐蚀开式叶轮浆泵 | 简介: HZ系列化工流程泵包括HZ(闭式叶轮型)、HZJ(半开式叶轮型)和HZQ(全开式叶轮型)。具有抗汽蚀性能更好、密封性能稳定、运行平稳、维修方便等优点，我公司精心研制的新一代化工流程泵，具有零部件的高互换性，高性能的机械密封，可生产各种防腐蚀材料的化工流程泵，在化工领域得到广泛的应用。... |
 |
耐腐蚀耐高温钛材离心泵 | 简介: HZ系列化工流程泵包括HZ(闭式叶轮型)、HZJ(半开式叶轮型)和HZQ(全开式叶轮型)。具有抗汽蚀性能更好、密封性能稳定、运行平稳、维修方便等优点，我公司精心研制的新一代化工流程泵，具有零部件的高互换性，高性能的机械密封，可生产各种防腐蚀材料的化工流程泵，在化工领域得到广泛的应用。... |
 |
用于强碱化工的单级单吸悬臂式离心镍泵 | 简介: HZ系列化工流程泵包括HZ(闭式叶轮型)、HZJ(半开式叶轮型)和HZQ(全开式叶轮型)。具有抗汽蚀性能更好、密封性能稳定、运行平稳、维修方便等优点，我公司精心研制的新一代化工流程泵，具有零部件的高互换性，高性能的机械密封，可生产各种防腐蚀材料的化工流程泵，在化工领域得到广泛的应用。... |
Same products
 |
OEM 定制卧式 LB 系列冰箱润滑油齿轮泵 | 卖方: 河北盛辉泵业 | LB 系列冷冻机齿轮泵适用于输送粘度在 200°E （1500mpa.s）以下，无固体颗粒杂质，温度不高于 120° 的各种机械油、透平油及其它性质相近，性能平稳的介质。该设备结... |
 |
OEM 定制卧式 LB 系列冰箱润滑油齿轮泵 | 卖方: 河北盛辉泵业 | LB 系列冷冻机齿轮泵适用于输送粘度在 200°E （1500mpa.s）以下，无固体颗粒杂质，温度不高于 120° 的各种机械油、透平油及其它性质相近，性能平稳的介质。该设备结... |
 |
新款 YHCB 系列可移动卧式圆弧齿轮输油泵 | 卖方: 河北盛辉泵业 | YHCB 系列圆弧齿轮泵专为输送高粘度流体（如油、树脂和化学溶液）而设计。这些泵广泛应用于需要精确可靠地处理流体的行业，包括石化、食品加工和制药行业。它们设计坚固、流量控制精确、易于维护，是需要... |
 |
便携式WCB系列不锈钢高粘度柴油齿轮输送泵 | 卖方: 河北盛辉泵业 | WCB齿轮油泵重量轻，体积小，携带移动方便。结构采用联轴器与介质隔离，联轴器单独润滑，齿轮采用合金钢，采用特殊的热加工工艺，表面硬度可达HRC60以上，耐磨性强，使用寿命长。与其它普通型泵相比，... |
 |
库存 ZYB 系列不锈钢废重油输送高压齿轮泵 | 卖方: 河北盛辉泵业 | ZYB系列废油泵用于抽送温度不高于200℃，粘度不大于150mm2/S含有非金属杂质的重油、柴油、煤焦油及粮油、化工、建材、日化等产品中的杂质。本机采用自密封润滑设计，间隙自动调整结构，零件采用... |
