Rotary Vane Vacuum Pump

Basic Principle

The sucking and exhausting valves are usually fitted in the round pump body where there is a centrifugal rotor with three vanes that is driven by centrifugal power. Through the three vanes, the inner space of vacuum pump is split into three parts, whose respective volumes will change periodically as the rotor rotates. With the cavity volume changes, the sucking, compressing and exhausting stage will be done, thus removing the air at the inlet and achieving high vacuums.

Characteristicsof 1. This vacuum pump gives the maximum vacuum degree of less than 0.5mbar.2. The vapor is ejected at high velocity.3. It generates low noise while operating and the signal to noise ratio is lower than 67db.4. Our product is eco-friendly. It is applied with an oil fog clearer, so there is no oil fog existing in exhaust air.5. Coming with compact structure as well as scientific and reasonable design, our pump is easy to be installed in the industry system.

Application Rangesof

1. 1. This product is suitable for packaging, by using vacuum or inert gases, various food, metal items, as well as electronic elements.2. It is fit for sticking photographs and advertisement sheets.
2. 1. This rotary vane vacuum pump is used for lifting glass plates, sticking boards and plastic planks, and loading or unloading non-magnetism items.2. It is applicable to loading or unloading, transporting the paper sheets and boards in paper making and printing industry.
3. 1. It applies to dipping and drying the electronic elements.2. Also, our product is capable of eliminating the air of powder materials, moulds, dopes, and vacuum furnace.

We are .Laboratory Devices, Medical Treatment Devices, Freon Recycling, Vacuum Heat Treatment

TYPE Power( Kw ) Suc Cap (m³/h) Speed (rpm) Utmost pressure(mbar)

X-40 1.1-1.5 40 1440 0.1-0.5

X-63 1.5-2.2 63 1440 0.1-0.5

X-75 1.5-2.2 75 1440 0.1-0.5

X-100 2.2-3 100 1440 0.1-0.5

X-160 4 160 1440 0.1-0.5

X-202 4 200 1440 0.1-0.5

X-302 5 300 1440 0.1-0.5

X-630 15 630 1000 0.1-0.5

Other supplier products

	Fisher Control Valve	SEATLESS, HARDSEAT AND UNIT TANDEM Designed for blow-off service in boiler systems with pressures of 3206 psig FEATURES •DesignedaccordingA...
	Flame Arresters	The Enardo Detonation represents thebest value in flame arrestor protection. They prevent flamepropagation by absorbing and dissipating heat us...
	2BV Liquid ring vacuum pump	Available in both cast iron and stainless steel construction, the 2BV family provides capacities up the 600m3/h(360CFM) in a compact monobloc...
	Pressure Regulating Valve price	Specificationsof This section lists the specifications for the MR95 Series regulators. Factory specification such as type, maximuminlet press...
	Flygt Sewage pump	Founded in Sweden more than 100 years ago, Flygt is a well-known water pump brand, sewage treatment solution provider and water technology compa...

供应产品

Same products

	OEM 定制卧式 LB 系列冰箱润滑油齿轮泵	卖方: 河北盛辉泵业	LB 系列冷冻机齿轮泵适用于输送粘度在 200°E （1500mpa.s）以下，无固体颗粒杂质，温度不高于 120° 的各种机械油、透平油及其它性质相近，性能平稳的介质。该设备结...
	OEM 定制卧式 LB 系列冰箱润滑油齿轮泵	卖方: 河北盛辉泵业	LB 系列冷冻机齿轮泵适用于输送粘度在 200°E （1500mpa.s）以下，无固体颗粒杂质，温度不高于 120° 的各种机械油、透平油及其它性质相近，性能平稳的介质。该设备结...
	新款 YHCB 系列可移动卧式圆弧齿轮输油泵	卖方: 河北盛辉泵业	YHCB 系列圆弧齿轮泵专为输送高粘度流体（如油、树脂和化学溶液）而设计。这些泵广泛应用于需要精确可靠地处理流体的行业，包括石化、食品加工和制药行业。它们设计坚固、流量控制精确、易于维护，是需要...
	便携式WCB系列不锈钢高粘度柴油齿轮输送泵	卖方: 河北盛辉泵业	WCB齿轮油泵重量轻，体积小，携带移动方便。结构采用联轴器与介质隔离，联轴器单独润滑，齿轮采用合金钢，采用特殊的热加工工艺，表面硬度可达HRC60以上，耐磨性强，使用寿命长。与其它普通型泵相比，...
	库存 ZYB 系列不锈钢废重油输送高压齿轮泵	卖方: 河北盛辉泵业	ZYB系列废油泵用于抽送温度不高于200℃，粘度不大于150mm2/S含有非金属杂质的重油、柴油、煤焦油及粮油、化工、建材、日化等产品中的杂质。本机采用自密封润滑设计，间隙自动调整结构，零件采用...