PTFE Seal
Polytetrafluoroethylene (PTFE), also known as teflon/teflon or plastic king, is a copolymer of tetrafluoroethylene monomer. First, it was developed for national defense and cutting-edge technology and development but later it has gradually extended to civil use, which is generally applied to corrosion-resistant pipes, containers, pumps, high frequency communication equipment and wireless electrical equipment with high performance requirements.
PTFE sealhas become the common seal material for its unique properties.
Performance of PTFE
Stability: almost all chemical resistance, strong acid, strong alkali or strong oxidizer and organic solvents have no effect on it.
Thermal stability: pyrolysis temperature above 400 ℃, therefore, it can work within the scope o - 200 ℃ ~ + 350 ℃.
Wear resistance: the friction coefficient of PTFE material is extremely low, only 0.02, which is 1/40 of rubber.
Self-lubricating: the surface of the PTFE material has a prominent self-lubricating property, and almost all of the viscous material cannot adhere to its surface.
However, the pure PTFE has the low strength and the abrasion performance is not very perfect. Usually some inorganic particles are put into the polymer PTFE, such as graphite, molybdenum disulfide, molybdenum disulfide, aluminium oxide, glass fiber, carbon fiber and so on to improve its mechanical properties. It also can be used with other polymers, such as polystyrene resin (PHB), polyphenylene sulfide (PPS), polyether ether ketone (PEEK), poly (perfluorinated (ethylene/propylene copolymer (PFEP) blending method to extend its damping temperature range and improve the creep resistance. Therefore, different PTFE materialas produce all knids of PTFE mechanical seals.
|
properties |
unit |
pure PTFE |
glass fibire filled PTFE |
carbon filled PTFE |
|
density |
g/cm3 |
|||
|
tensile strength |
MPa |
30 |
15 |
13 |
|
℃ |
260 |
260 |
260 |
Sealconprovides high pressure mechanical seal,welcome to order.
在线联系供应商
Other supplier products
 |
Carbon Seal | Mechanical carbon sealhas a long history. Graphite is an isoform of element carbon. In 1971, the United States studied the successful flexible grap... |
 |
FLYGT MECHANICAL SEALS | Flygt mechanical seals are usually used in the Swedish ITT Flygt mixer and submersible sewage pumps. They are one of the essential Flygt pump parts... |
 |
Carbon Seal | Carbon shaft sealhas a long history. Graphite is an isoform of element carbon. In 1971, the United States studied the successful flexible graphite ... |
 |
SINGLE CARTRIDGE SEALS | Our single cartridge type sealis manufactured by balanced seal-face technology, helping to reduce energy comsumption whilst increasing reliability.... |
 |
Flygt Mechanical Seals Plug in Plastic | Replacement for: Plug in seals with plastic housing Features: Original Sweden design cartridge design big stock wilo pumps ITT pumps Flyg... |
Same products
 |
OEM 定制卧式 LB 系列冰箱润滑油齿轮泵 | 卖方: 河北盛辉泵业 | LB 系列冷冻机齿轮泵适用于输送粘度在 200°E （1500mpa.s）以下，无固体颗粒杂质，温度不高于 120° 的各种机械油、透平油及其它性质相近，性能平稳的介质。该设备结... |
 |
OEM 定制卧式 LB 系列冰箱润滑油齿轮泵 | 卖方: 河北盛辉泵业 | LB 系列冷冻机齿轮泵适用于输送粘度在 200°E （1500mpa.s）以下，无固体颗粒杂质，温度不高于 120° 的各种机械油、透平油及其它性质相近，性能平稳的介质。该设备结... |
 |
新款 YHCB 系列可移动卧式圆弧齿轮输油泵 | 卖方: 河北盛辉泵业 | YHCB 系列圆弧齿轮泵专为输送高粘度流体（如油、树脂和化学溶液）而设计。这些泵广泛应用于需要精确可靠地处理流体的行业，包括石化、食品加工和制药行业。它们设计坚固、流量控制精确、易于维护，是需要... |
 |
便携式WCB系列不锈钢高粘度柴油齿轮输送泵 | 卖方: 河北盛辉泵业 | WCB齿轮油泵重量轻，体积小，携带移动方便。结构采用联轴器与介质隔离，联轴器单独润滑，齿轮采用合金钢，采用特殊的热加工工艺，表面硬度可达HRC60以上，耐磨性强，使用寿命长。与其它普通型泵相比，... |
 |
库存 ZYB 系列不锈钢废重油输送高压齿轮泵 | 卖方: 河北盛辉泵业 | ZYB系列废油泵用于抽送温度不高于200℃，粘度不大于150mm2/S含有非金属杂质的重油、柴油、煤焦油及粮油、化工、建材、日化等产品中的杂质。本机采用自密封润滑设计，间隙自动调整结构，零件采用... |
