Mechanical Dosing Pump
Mechanical Dosing Pump
The mechanical metering pump is a motor that drives a worm gear pair to make a variable speed movement through a direct drive. Under the action of a crank connecting rod mechanism, the rotary motion is converted into a reciprocating linear motion. The so-called diaphragm metering pumpuses a specially designed and processed flexible diaphragm to replace the traditional piston, and realizes reciprocating motion under the action of the driving mechanism, thereby completing the suction to discharge process. Due to the isolation effect of the diaphragm, the isolation between the metered fluid and the driving lubrication mechanism is truly realized in structure. Since its diaphragm bears the pressure on the medium side, the maximum discharge pressure of a mechanical diaphragm pumpgenerally does not exceed 1.2MPa.
① When the diaphragm is pulled back, the outlet ball valve falls down and tightly fits the ball seat. The inlet ball valve floats upward due to the vacuum generated between the diaphragm and the pump head when the diaphragm is pulled back, and the liquid is sucked up.
②When the diaphragm is pushed forward, the inlet ball valve is airtight with the ball seat to prevent liquid from passing through, and the outlet is pushed forward by the diaphragm to open the ball valve and the liquid is discharged.
①the ball seat and ball valve cannot be airtight
②the entrance and exit are blocked by foreign matter
③diaphragm damage.
Therefore, when the liquid is conveyed abnormally, the problem should be solved in this direction, and the factors that cause the above situation are too numerous to list, depending on the piping, fittings and operating conditions at the time.
Features Of Mechanical Diaphragm Metering Pump:
(1) Lower price;
(2) No dynamic seal and no leakage;
(3) It can transport high-viscosity media, abrasive slurries and hazardous chemicals;
(4) The diaphragm bears high stress and the diaphragm life is relatively low;
(5) The outlet pressure is below 3MPa, and the measurement accuracy is ±2%;
(6) No safety relief device.
How To Install A Mechanical Diaphragm Metering Pump?
The mechanical diaphragm metering pump is supported by a solid, anti-vibration foundation. The foundation is higher than the ground, one side of which is washed by water, and is also easy to repair. Enough space around the mechanical diaphragm metering pump is reserved to facilitate pump maintenance and adjustment.
There are mounting holes at the bottom of the mechanical diaphragm metering pump for mounting anchor bolts.
The mechanical diaphragm metering pump installed outdoors should be covered by a canopy.
Ark Electric & Mechanical Co., Ltd (ARK LTD) is one of professional dosing metering pumps manufacturers. We provide Solenoid Dosing Pump, Motor Driven Diaphragm Pump, single diaphragm dosing pumpand so on. Want to know more? Please contact us.
在线联系供应商
Other supplier products
 |
Manual Dosing Pump | Manual Dosing Pump Introduction Of Manual Metering Pump The flow rate of the dosing pump manualis constant and can be manually adjusted. The flow ... |
 |
High Pressure Dosing Pump | High pressure dosing pumps are useful in many occasions of technology, and high pressure and mass flow are the typical features of it. However, hig... |
 |
High Pressure Dosing Pump | High pressure dosing pumpare useful in many occasions of technology, and high pressure and mass flow are the typical features of it. However, high ... |
 |
Metering Pump | Matters Needing Attention When Installing The Metering Pump: Operating Procedures Of The Metering Pump: “remote” position. The stro... |
 |
Low Pressure Dosing Pump | Low pressure dosing systemcan be used on many occasions with strict requirements. Moreover, technological progress, industrial development, and aut... |
Same products
 |
2be4 400 Liquid Ring Vacuum Pump | 卖方: Greentech International (Zhangqiu) Co., Ltd | The main characteristics of 2BE4 series products:· The tolerance, corrosive status, and th... |
 |
2be4 670 Liquid Ring Vacuum Pump | 卖方: Greentech International (Zhangqiu) Co., Ltd | The application range and characteristics:2BE4 series water ring vacuum pumps and compressors are... |
 |
Choosing Reliable Equipment for Industrial Cleaning | 卖方: Taizhou Feike Mechanical Technology Co., Ltd. | FEIKE High Pressure Washer is designed for industrial cleaning, vehicle washing, equipment mainte... |
 |
Water Ring Vacuum Pump 2BE1 403 | 卖方: Greentech International (Zhangqiu) Co., Ltd | Application scope and characteristics:Greentech International (Zhangqiu) Co., Ltd is the professi... |
 |
Precision Engineering for High Pressure Spray Systems | 卖方: Jinhua Shuangding Machinery Co., Ltd. | The High Pressure Diaphragm Pump for Sprayers is designed for agricultural spraying systems, crop... |
